• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.52-67
• /
• 1982

We have relatively heavy stocks of hardwood which consist of inferior and nonproductive natural hardwood species in Korea. As conception above to develope these forest resources, the study was carried out to obtain the basical data for the reasonable and efficient utilization of hardwoods. The sample trees were selected 11 natural hardwood species grown in Kangwon-do region and Kwangnoong Experimental Forest. We have investigated anatomical, physical and mechanical properties of them. Especially, Quercus species which is a major species in the forests was investigated on qualities of trees, logs and lumbers, recevery of bucking and lumber yield, etc.

• Journal of the Korean Wood Science and Technology
• /
• v.4 no.1
• /
• pp.38-47
• /
• 1976

This study was carried out to exploit and utilize American sycamore (Platanus occidentalis) and poplar grown in Korea as veneer species for plywood manufacture. At this study to save the imported lauan logs and dollars, the effects affecting to the properties of plywood constructed by sycamore, poplar and lauan veneers were studied. Important items dealt with this study were dry and wet shear strength, moisture content, and specific gravities By the results and discussion it may be summarized as followings. 1) Sycamore core lauan plywood (A-II type) was shown best dry shear strength, and the next were all lauan veneer plywood (A-I type), poplar core lauan plywood (B-I type), lauan core sycamore plywood (A-III type) in order. There are no differences between dry shear strength of A-II type and A-I type, A-II type and B-I type plywood. 2) Wet shear strength showed the same order with dry shear strength. A-II type plywood showed best wet shear strength and it showed more difference than other plwoods. A-I type, B-I type and A-III type plywood were all very good without significant difference in wet shear strength. 3) B-I type plywood showed highest moisture content of all type plywood and the next were all sycamore(A-IV type) all poplar plywood (B-III type), A-III type, B-II type, A-II type pllywood in order. Generally high moisture content showed when two or three veneers were same species in the three layer plywood. 4) A-III type plywood showed highest specific gravity of all and the next was A-IV type plywood without a difference to A-I type plywood on the whole. plywoods constructed by lauan and sycamore were shown high specific gravities and the next was lauan, sycamore and poplar, lauan and poplar. It seemed to be that connected wi th the specific gravity of veneer itself in different species. 5) The plywood manufactured by extension of potato flour is not only superior but also profitable in the price aspect than the plywood manufactured by extension of wheat flour.

• Journal of Korean Society of Forest Science
• /
• v.79 no.1
• /
• pp.1-15
• /
• 1990

In this study the stem analysis program, which can be operated with personal computer was developed to reduce time and cost of calculation, and to increase accuracy of analysis. The stem analysis method used in this program was compared with other methods. The results obtained were as follows : The value, 1/100mm measured from the latest annual ring measurement machine (Jahrringme${\beta}$geraete Johan Type II) was automatically inputed to the computer and saved into given file name. Turbo Pascal program was written to do this. The measured data was analyzed by stem analysis calculation program written by Fortran-77. Volume and height increments were approximated by spline function, and diameter of the stem disk was calculated by quadratic mean method. The increment values calculated by the programs were printed annually and in every five-year. Stem analysis diagram and several increment graphs were also easily printed. The result compared between those analysis methods showed that quadratic mean could reduce the error caused from eccentric pith. When the stem taper curve method, approximated by spline function, was used in the calculation of tree height and volume, increments would be more exactly calculated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.18-18
• /
• 2010

전기적 에너지를 기계적 에너지로 변환하고 또한, 기계적 에너지를 전기적 에너지로 변환할 수 있는 압전 세라믹스는 압전 변압기 (piezoelectric transformer), 초음파 모터, 센서 등과 같은 응용분야에 광범위하게 사용되고 있다. 특히, 전원장치에 있어서 현재 주요 전자제품에 사용되고 있는 권선형 변압기와 같은 전자 변환기의 대체품으로 압전 세라믹스 소재의 특성을 이용한 압전변압기의 개발과 응용연구는 국내외적으로 활발히 연구되어왔다. 압전변압기는 권선형 변압기와 비교 하였을 때 누설자속이 없어 노이즈 발생이 없고, 공진주파수만을 이용하므로 출력의 파형이 정현파에 가까워 고조파 잡음이 없으며, 불연성의 특징을 가지고 있다. 추가적으로 압전 변압기는 소형화, 슬림화, 경량화가 가능하며 90%이상의 높은 효율을 얻을 수 있다. 또한, 단판형 압전변압기의 출력한계를 개선하기 위해 높은 승압비와 고출력을 갖는 적층타입의 압전변압기가 제안되었다. 압전변압기용 조성 세라믹스는 높은 에너지 변환효율을 위해서 전기기계결합계수 ($k_p$)가 커야 하며, 발열에 의한 온도 상승을 억제하기 위하여 기계적 품질계수(Qm)가 큰 것이 바람직하다. 또한, 높은 전류를 발생하기 위해서는 유전상수가 커 압전변압기의 출력측 정전용량을 크게 하여야한다. 이러한 압전변압기의 제작 조건을 위해 우수한 압전 및 유전특성을 갖는 PZT계 세라믹스가 주로 사용 되어져 왔다. 그러나, PZT계 세라믹스의 우수한 압전 및 유전특성에도 불구하고 $1000^{\circ}C$에서 급격히 휘발하는 PbO의 성질 때문에 환경적으로나 인체의 건강문제로 인해 전세계적으로 그 사용량을 제한하고 있다. 또한 적층 압전변압기의 구조적 특성상 내부전극과 함께 소결하여야 하는데, 이때 소결온도가 높으면 값비싼 Pd합량이 높은 전극을 사용하여야 한다. Pd함량이 10%미만인 Ag/Pd 전극을 사용하기 위해서는 $950^{\circ}C$ 이하에서 저온소결이 가능한 세라믹스 제조가 필수적이라 할 수 있다. 소결온도를 낮추는 방법으로는 다른 물질들을 치환하여 소결온도를 낮추는 방법과 미세분말을 만들어 그레인사이즈를 미세화 하는 방법들이 있다. 많은 미세 분말 제조 방법 중에서 Attrition mill은 일반적인 ball mill에 비해 분말의 입도를 미세하게 할 수 있어 증가된 분말의 비표면적에 의하여 반응을 촉진시킴으로써 저온소결이 가능한 세라믹스를 만들 수 있다. 따라서 본 연구에서는 소결온도가 낮으면서도 유전 및 압전특성이 우수한 조성을 사용하여 적층 압전변압기를 제작하여 전기적 특성을 조사하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.206-206
• /
• 2008

압전소자를 이용한 초음파 모터는 전자기적 원리로 동작하는 기존의 모터에 비해 구조가 간단하고 소형, 경량화가 가능하며 저속에서 큰 토크가 가능하고 ${\mu}m$단위 까지 정밀제어가 가능하다는 장점 등으로 인해 그 응용분야가 점차 확대되고 있다. 초음파 모터의 원리는 수평과 수직방향에서 변위가 타원형 운동을 형성하는 것이다. 따라서 선택한 타원운동의 방식에 의해서 모터의 형상이 달라진다. 초음파 모터는 액츄에이터를 사용하여 만들기 때문에 액츄에이터의 특성은 모터의 타원변위나 토크에 영향을 미친다. 단판형 액츄에이터에 비하여 적층 액츄에이터는 입력 임피던스를 낮추어 낮은 구동전압에서 구동이 가능하며 큰 변위와 토크를 발생하기 때문에 진동자의 수명 향상과 구동전압을 낮추기에 적합하다. 적층 액츄에이터는 변위량이나 응력 등을 개선하기 위해서 전기기계 결합계수(kp) 및 압전 d상수가 큰 재료가 요구되며, 고전압에서 장시간 구동 시 마찰에 의한 열손실을 감소시키기 위해 높은 기계적 품질계수(Qm)를 가져야한다. 적층 시 내부전극으로 사용하는 Pd, Pt가 함유된 전극은 가격이 비싸 제조비용을 상승시킨다. 상대적으로 값싼 Ag전극을 사용하면 비용절감을 할 수 있지만 융점이 낮아서 저온소결이 불가피하다. 따라서, 특성이 우수한 적층 액츄에이터를 제조하기 위해서 저손실, 저온소결 할 수 있는 액츄에이터 재료가 필요한 실정이다. L1-B4 혈 선혈 초음파 모터는 L1모드와 B4모드의 공진 주파수가 일치하여야 큰 변위를 얻을 수 있는데 이전의 논문에서 Atila를 이용한 시뮬레이션 결과를 분석한 봐 있다. 적층 액츄에이터의 층수를 5,7,9,11,13,15층으로 하여 L1-B4모드에서의 공진주파수를 비교한 결과 13 층일 때 두 모드가 비슷한 공진주파수를 보였고, 티원변위궤적도 다른 층수에 비해 크게 나타났다. 본 연구에서는 시뮬레이션 결과 가장 좋은 특성을 보인 13층 액츄에이터로 선형 초음파 모터를 제작하였다. 또한, 액츄에이터는 압전 및 유전특성이 우수한 저온소결 PZW-PMN-PZT세라믹을 이용하여 제작하였고, 내부전극으로 Ag전극을 사용하였다. 제작된 13 층 선형초음파모터를 가지고 프리로드 및 전압에 따른 속도를 조사하였고, 시뮬레이션 결과와 비교해 보았다.

• Journal of Korean Society of Forest Science
• /
• v.109 no.1
• /
• pp.62-71
• /
• 2020

With the aim of restoring slow-moving landslide areas, this study collected fundamental data from tree-ring analysis of curved trees in these areas. We collected both upper and lower stem disks to measure the azimuth angles of six trees with growth curvature caused by tension cracks. Additionally, we analyzed various factors in the slow moving landslide area. The geological strata and main constitutive rocks in the study area were anorthosite-formed in the Precambrian period; moreover, there were no intrusive rocks, other geological strata, geological folds, or faults. The talus with weathered rocks was distributed in the upper zone of the slow-moving landslide area. According to annual-ring analysis of curved trees and terrain analysis by satellite imagery, slow-moving landslide occurred from the top to the bottom end of the slope between 1999 and 2011. There was a significant relationship (P < 0.01) between the azimuth angle of cracks caused by the slow-moving landslide and the angle of the curved trees. These results suggest that the occurrence of slow-moving landslides could be confirmed through analysis of annual-rings of curved trees, underground water levels, and terrain (by satellite imagery).

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.868-875
• /
• 2015

In order to replace existing slit type steel plate on the wooden structure joint, the FRP-reinforced laminated plates were produced. Four types of FRP-reinforced laminated plates were produced according to the type of reinforcement and adhesive, and before applying to the joint, the adhesion performance test according to KSF 3021 and KSF 2160 and the Compact Tension (CT) type fracture toughness test specified in ASTM D5045-99 were carried out. As a result of adhesion performance test, all GFRP textile, GFRP sheet, and GFRP Textile-Sheet type FRP-reinforced laminated plates satisfied the requirement of soaking delamination percentage with smaller than 5% based on KS standard. However, aramid type specimen satisfied the standard as the soaking delamination percentage of 4.8% but it did not satisfied the standard as the water proof soaking delamination percentage of 70%. As a result of fracture toughness test, the volume ratio of reinforcement to timber became 23% so that the strength of FRP-reinforced laminated plates increased by two to four times in comparison to the control specimen. It was confirmed that the GFRP Textile-Sheet type specimen was most resistant to the fracture most since the ratio of stress intensity factor compared with that of the control increased to 61% owing to the parallel arrangement of glass fiber to the load. As a result of tensile shear strength test using FRP-reinforced laminated plates and nonmetal dowels, it is about 12% lower than metal connectors.

• Journal of Korean Society of Forest Science
• /
• v.97 no.4
• /
• pp.408-416
• /
• 2008

This study was analyzed the changes of the tariff reduction for the timber products according to the modalities proposed by the chairman of Non-agriculture Market Access. The resulted data would be expected to be used for establishing the strategies for the WTO/DDA negotiation of Korea. As WTO/DDA negotiation was officially resumed in the early 2007. It was necessarily required to develop a strategy how to address debating core issues raised during the negotiation since 2006. For this purpose, major core issues and agenda were arranged and analyzed in this study. In Korea, the results of the analysis show that, in the position of developed members, the applicable tariff rates after the tariff reduction of sawnwood and veneer sheet was not different from that in 2007. However, in the position of developing members, the applicable tariff rate of sawnwood and veneer sheet was increased after the tariff reduction. The unbound tariff lines, wood-based panels such as plywood and medium-density fiberboard, the applicable tariff rate after the tariff reduction was analyzed to be reduced more than 50% in the position of developed members, and therefore is determined to be considerable influenced upon the applicable tariff rates. On the other hand, in the position of developing country the tariff rates after the tariff reduction was higher than that of the applicable tariff rates in 2007. Thus no changes of the tariff reduction by a negotiation agreement was analyzed to be happened.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.331-337
• /
• 2001

This study was performed to develope stem analysis program(Stemwin1.0) which can be used in PC with MS-Windows operating system. Stemwin1.0 uses width of annual tree ring measured with 1/100mm unit, and calculate increments of several growth factors such as DBH, height and volume with various methods. Mean DBH can be calculated by arithmetic and quadratic mean methods. Height can be estimated by parallel line, line extending and height curve methods. Volume can be estimated by Huber, Smalian, and Spline functions. Not only Total growth, Mean Annual Increment(MAI) and Current Annual Increment(CAI) of growth factors, but also merchantable volume and height, form factor, growth rate, and merchantable volume rate are automatically calculated. Stemwin1.0 can also output accurate stem taper curve with various scale, and prepare stem taper data(diameter at different disk heights) for statistical analysis for deriving stem taper model. Stemwin1.0 can export output data and graph to Excel for more compatible use of it.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.258-265
• /
• 2014

By replacing the previous metal connector on the joints of timber structure, the GFRP reinforced laminated wooden pin was produced using a wooden material and Glass fiber reinforced plastic(GFRP) composite laminate. In addition, using the reinforced wooden pin, the tensile type shear strength test was conducted. Based on the result of the bending strength test of the reinforced laminated wooden pin according to the GFRP arrangement, a specimen(Type-A) with a single insertion of GFRP for each layer have shown the most favorable performance. Also, it was verified that densified specimen hot pressed for an hour at the temperature of $150^{\circ}C$ and with the oppression pressure $1.96N/mm^2$ have shown the improved performance of 1.57 times than the specimen without the densification. And in the bending strength test considering the load direction, edgewise have shown a higher performance of 3.51 times than the flatwise. A shear strength test was conducted using the Type-A reinforced laminated wooden pin which have shown a moderate performance on the test. Based on the test conducted by differentiating the type of the joint plate and the connector, compared to the specimen(Type-DS) applied with the drift pin and steel plate, the specimen( Type-WL) applied with the GFRP reinforced laminated wooden pin and GFRP reinforced wooden laminated plate have shown 1.12 times higher shear strength and also have shown an excellent toughness even after the maximum load.