• The Journal of Engineering Geology
• /
• v.27 no.4
• /
• pp.489-500
• /
• 2017

It is not rare that pseudotachylite, dark colored rock with glassy texture, is recognizable in deep core samples drilled up to 900 m from the surface. Pseudotachylite with widths varying few to 20 cm is sharply contacted or interlayered with the host rocks composed of Jurassic granite and Precambrian amphibolite gneiss, showing moderately ductile deformation or slight folding. Pseudotachylite occurring at varying depths in the deep drill core are slightly different in texture and thickness. There is evidence of fault gouge at shallower depths, although brittle deformation is pervasive in most drill cores and pseudotachylite is identified at random depth intervals. Under scanning electron microscope (SEM), it is evident that the surface of pseudotachylite is characterized by a smooth, glassy matrix even at micrometer scale and there is little residual fragments in the glass matrix except microcrystals of quartz with embayed shape. Such textural evidence strongly supports the idea that the pseudotachylite was generated through the friction melting related to strong seismic events. Based on X-ray diffraction (XRD) quantitative analysis, it consists of primary minerals such as quartz, feldspars, biotite, amphibole and secondary minerals including clay minerals, calcite and glassy materials. Such mineralogical features of fractured materials including pseudotachylite indicate that the fractured zone might form at low temperatures possibly below $300^{\circ}C$, which implies that the seismic activity related to the formation of pseudotachylite took place at shallow depths, possibly at most 10 km. Identification and characterization of pseudotachylite provide insight into a better understanding of the paleoseismic activity of deep grounds and fundamental information on the stability of candidate disposal sites for high-level radioactive waste.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.143-147
• /
• 2016

Recently, digital tomosynthesis system (DTS) has been developed to reduce overlap using conventional X-ray and to overcome high patient dose problem using computed tomography (CT). The purpose of this study was to develop image reconstruction algorithm and to evaluate image characteristics and dose with chest digital tomosynthesis (CDT) system. Image reconstruction was used for filtered back-projection (FBP) methods and system geometry was constructed ${\pm}10^{\circ}$, ${\pm}15^{\circ}$, ${\pm}20^{\circ}$, and ${\pm}30^{\circ}$ angular range for acquiring phantom images. Image characteristics carried out root mean square error (RMSE) and signal difference-to-noise ratio (SDNR), and dose is evaluated effective dose with ${\pm}20^{\circ}$ angular range. According to the results, the phantom image with slice thickness filter has superb RMSE and SDNR, and effective dose was 0.166 mSv. In conclusion, we demonstrated usefulness of developed CDT image reconstruction algorithm and we constructed CDT basic output data with measuring effective dose.

• Journal of radiological science and technology
• /
• v.39 no.3
• /
• pp.369-376
• /
• 2016

Positron Emission Tomography(PET) is nuclear medical tests which is a combination of several compounds with a radioactive isotope that can be injected into body to quantitatively measure the metabolic rate (in the body). Especially, Phenomena that increase (sing) glucose metabolism in cancer tissue using the $^{18}F$-FDG (Fluorodeoxyglucose) is utilized widely in cancer diagnosis. And then, Numerous studies have been reported that incidence seems high availability even in the modern diagnosis of dementia and Parkinson's (disease) in brain disease. When using a dynamic PET iamge including the time information in the static information that is provided for the diagnosis many can increase the accuracy of diagnosis. For this reason, clinical researchers getting great attention but, it is the lack of tools to conduct research. And, it interfered complex mathematical algorithm and programming skills for activation of research. In this study, in order to easy to use and enable research dPET, we developed the software based graphic user interface(GUI). In the future, by many clinical researcher using DIA-Tool is expected to be of great help to dPET research.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.3
• /
• pp.45-51
• /
• 2008

A single layer-latticed dome is advantageous for large span structures because it is very stiff despite the light weight of the structure itself. However, this structure becomes easily unstable during erection due to its large size. The Block method is popular with the large span structures. A partial block of the dome is fabricated on the ground and lifted by crane to a designated location of structures. The lifting point selection is very important to create a stable erection and to avoid buckling of members during the erection. The purpose of this study is to analyze the structural behaviors and buckling characteristics according to the lifting point of single-layer latticed domes with triangle network in order to take materials about the safe and economic erection. The conclusions are obtained as follow. 1) The buckling strength of the block part varies with the location of lifting points when it is erected. In case, the height of the dome is lower, the effort of buckling strength of the structure is higher. 2) In buckling strength, the effect of the lifting rope length is smaller than it of the lifting points change.

• Survey Research
• /
• v.10 no.1
• /
• pp.113-139
• /
• 2009

It is desirable to use a monthly benchmarked construction indicator which contains the characteristics of statistical data in an annual survey in order to analyze the cyclical phenomenon of the construction activity. The benchmarked indicator is expected to improve the data quality in terms of accuracy, consistency, comparability, and completeness. In this paper, benchmarking methodologies of compiling monthly construction indicators arc researched by using a monthly prompt data holding short - term fluctuations and an annual survey data regarded as more accurate statistics than monthly data. The benchmarking is the methodology by which a high frequency data should he adjusted in order to hold the short-term and cyclical phenomena, and the long - term trend of two data groups with ensuring the consistency of an annual summation between a high frequency data and a low frequency data. This paper considered the numerical approach like pro rata distribution method, proportional Denton method, EFL or HP filter Benchmark - to - Indicator ratio method, and the model - based approach such as Chow and Lin method, $Fem{\acute{a}}ndez$ method. Also, the benchmarked construction indicators were estimated by early mentioned benchmarking methods with practical data, and these methods were empirically reviewed and compared. In case of construction indicators with severe seasonal fluctuations and irregulars, the numerical approach seemed to be performed more correctly than the model- based approach. Among numerical methods, the proportional Denton method used in general was a little nice. The HP filter Benchmark - to - Indicator ratio method may be considered with survey errors or measurement errors in an annual survey data.

• Journal of the Korean earth science society
• /
• v.33 no.6
• /
• pp.534-543
• /
• 2012

The relationship between tectonic uplift and geophysical analysis of gravity anomalies and the in-situ stress fields in the Otway Ranges, SE Australia is addressed in this study to understand the nature and possible mechanism for the neotectonic movements. The uplift axis of the ranges is coincident with the regional Bouguer gravity highs whereas thick Tertiary sedimentary successions are highly correlated with the gravity lows along the basin rift geometry. This result suggests that the gravity highs are separated by the thick Tertiary sedimentary successions. Regional structural trends associated with faults and foldings of the deformed surfaces are consistent with the prevailing NW-SE $S_{Hmax}$ trend in this part of the continent. The anomalously positive correlation between topography and Bouguer gravity fields suggests possibly a lithospheric flexural deformation mode at a long wavelength (order of $10^2$ kms) in the region. It also suggests that the reactivation of pre-existing lithospheric structures driven by plate boundary forces plays a key role in this mode.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.483-483
• /
• 2013

Latral Composition Modulation (LCM)으로 성장한 InP/GaP 초격자(Superlattice)의 선편광된 광발광(Photoluminescence) 특성을 저온(5 K)에서 측정하였다. LCM 기법은 z-축 방향으로 InP와 GaP를 단층 초격자(monolayer supperlattice)로 성장하는 과정에서 strain에 의해 x-y 평면으로 초격자가 형성되는 특별한 경우이다. 이렇게 성장된 LCM 초격자의 경우 In-rich 영역과 Ga-rich 영역이 교차로 성장되는 구조를 가지며 가전자대역(valence band)에서 무거운 양공과 가벼운 양공의 band mixing 이 일어나게 되어 선평광된 발광특성을 가진다. 우리는 저온 발광실험에서 In-rich 영역과 Ga-rich 영역의 재결합에 의해 나타나는 두 개의 독립된 전이 피크를 측정하였다. 이 두 피크는 [110] 방향의 편광에서 발광 강도가 최대치를 가지며 [1-10] 방향에서 최소값을 가짐을 보였다. 이때 전이 에너지의 경우 [110] 방향에서 [1-10] 방향으로 편광이 바뀔 때 Ga-rich 영역의 전이의 경우 적색편이를 나타낸 반면 In-rich 영역의 경우 청색편이를 보이는 현상을 발견하였다. 이러한 상반된 편이 현상은 서로 다른 3족 물질의 영역에 따라 격자 상수가 바뀌며 tensile strss와 compressive stress에 따른 가전자 대역의 band mixing 변화에 기인하는 것으로 여겨진다.

• Journal of Ginseng Research
• /
• v.13 no.1
• /
• pp.71-78
• /
• 1989

The structural changes in the pericarp of Panax ginseng fruit cells are studied during maturation periods. The pericarp can be divided into exocarp, mesocarp and endocarp. The exocarp consists of one layer of epidermal cells which is covered by a thin cuticle and hypodermal cells. A central vacuole and peripheral cytoplasm are observed in the exocarp and mesocarp. Also, irregular wall arrangement are observed during the differentiation. The endocarp is clearly marked off from the others by secondaw wall thickening and lignification. Secretory materials produced by the Golgi complex and rough endoplasmic reticulum vesicles appear to accumulated in the cell wall. These secretory materials are considered major components of the seed coat during the differentiation.

• Journal of the Korean Magnetics Society
• /
• v.5 no.3
• /
• pp.210-215
• /
• 1995

$Glass\Cr_{40\AA}\{[Cr_{10\AA}\NiFe_{50\AA}]}_N$ multilayers (number of layer N = 1, 2, 3, 4, 5, 6, 10) were made by dc magnetron sputtering under magnetic anisotropy of 200 G. Magnetoresistance curve MR(xx), MR(xy) were measured for the parallel and perpendicular current direction to external magnetic field. MR(xx) curves for the number of layer N=1, 5, 10 were almost became about zero percent, however the curves of other numbers appeared the phenomena of "positive magnetoresistance" that the resistance increased to external magnetic field, and the irregular and reversed curves in the vicinity of H=0 Oe.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.296-297
• /
• 2007

PMN-PZT 단층 및 다층 후막을 알루미나 기판위에 켄티레버 형태로 제작하여, 외부의 미소 진동에 의한 마이크로 발전 특성을 고찰하였다. 미소 변위에 의한 마이크로 발전 특성은 켄티레버의 무게(load), 진동수, 켄티레버의 길이 등에 밀접한 영향을 미치므로 이에 준한 요소를 고려하여 여러 가지 변수로 실험하였다. 연구 결과 서로 다른 소재의 기판과 발전체의 계면 분리 현상, 전극과 발전체의 분리 현상, 소결 온도 등이 소재 측면의 문제점으로 크게 대두되었으며, $5{\times}20mm$ 기판위에 형성된 발전체의 특성은 $1.1k{\Omega}{\sim}1M{\Omega}$의 부하에 따른 전압변동이 0.01V에서 3.6V로 큰 차이가 났다. 켄티레버의 로드의 변화에 대한 피크 전압은 $1.9{\sim}{\pm}2.8V$로 조사되었으며, 출력은 $0.45{\sim}4{\mu}W$로 측정되었다. 그러나 이런 외부 조건 보다 압전체의 공진 특성과 진동수는 가장 중요한 요인으로 나타났으며, 몇몇 문제가 해결될 경우 마이크로 발전소자로의 활용 가능성이 있는 것으로 조사되었다.