• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.308-308
• /
• 2011

6.48 ${\AA}$의 격자 상수를 갖는 InSb 물질은 0.17 eV의 낮은 에너지 밴드갭과 78,000 cm2/Vs의 전자 이동도를 갖는 물질로서 고속의 자성 센서소자, 장파장의 광 검출기 그리고 고속 전자소자 등의 분야에서 많은 주목을 받고 있다. 그러나, 전기적 특성이 우수한 InSb 물질을 소자로 구현하는데 있어서 큰 어려움이 있다. InSb와 격자 크기가 잘 맞으면서 절연이 우수한 기판의 부재가 가장 큰 문제가 되는 부분이다. 즉, 격자 부정합을 최소화하며 동시에 절연기판을 사용함으로써 소자의 특성을 잘 살려야 하는 것이다. 이러한 이유로 인하여 InSb 기반의 소자가 널리 사용되지 못하고 있는 것이다. 현재 범용으로 사용하고 있는 기판은 격자 부정합이 14%인 GaAs, 11%의 InP 그리고 18%의 Si 등이 있다. 이번 발표에서는 GaAs 기판 위에 격자 부정합을 최소화하여 InSb 박막을 최적화 시켜 성장하는 방법에 대해서 소개하고자 한다. InSb 박막 성장하는데 있어 논문으로 보고된 여러 가지 방법들이 있다. 기판과의 격자 부정합을 줄이기 위하여 저온-고온 (L-T)의 의한 메타몰픽(metamorphic) buffer 층을 성장 후 InSb 박막을 성장하는 방법[1] 그리고 단계별 buffer를 성장하는 방법[2] 등을 통해서 많은 진보가 있었다. 하지만, 우리는 GaAs 기판 위에 AlSb 박막을 성장 하면서 동시에 In과 Al의 양을 서서히 변화시키는 grading 기술을 사용하였다. 즉, 물질 각각의 격자상수를 고려하여 GaAs (기판)-AlSb-InAlSb-InSb로 변화를 주어 격자 부정합이 최소가 되도록 하여 만들어진 buffer 위에 InSb 층이 만들어 지도록 하여 GaAs 기판 위에 InSb 박막을 성장 할 수 있었다. grading 기술을 이용하여 만들어진 buffer 위에 성장된 0.3 um의 InSb 박막 층은 상온에서 전자 이동도가 약 38,000 cm2/Vs에 이르는 것을 확인하였다. InSb 박막의 두께가 약 1 um 되어야 30,000 cm2/Vs 이상의 전자 이동도를 얻을 수 있다고 많은 논문을 통해서 보고 되고 있으나 우리는 단지 0.3 um의 InSb 박막두께에서 이와 같은 전기적인 특성을 확인하였기에 이상과 같이 보고 하고자 한다.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.4
• /
• pp.77-91
• /
• 2012

Recently, construction of housing sites, complexes, roads, ports and airports is increasing for high-intensity use of the country and balanced development between regions. Presently, constructions are being conducted at soft ground. Consequently, engineering problems as long-term settlement of the ground, differential settlement, local structural damage have been reported consistently at construction site. In particular, long-term subsidence of the ground as various constructions and loads by the load will necessarily occur in the soft ground of west-south coast and inland coast. Therefore, in this study, regional proper analysis methods of the Hyperbole method, Hosino method, $\sqrt{S}$ method, Asaoka method etc as existing long-term settlement prediction methods have been examined and a study on new prediction method was conducted through deduction of a generalized equation. Correlation coefficients of soil properties and construction conditions has been analyzed and a matching coefficient of long-term settlement characteristics has been deducted. Comparison and analysis of monitoring data and numerical analysis results of 16 local area have been conducted.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.303-314
• /
• 2011

This paper proposes a differential pricing model for industrial land based on locational characteristics, using Support Vector Regression (SVR) as a land pricing methodology. The initial selling price of industrial land is set based on the total cost of site development that comprises the land acquisition cost and tax, land development expense, infrastructure installation cost, labor cost, migration expense, selling and administrative expense, capital cost, and so on. However, the current industrial land pricing method unreasonably applies the same price per square meter to all parcels within an industrial complex without considering differences in price depending on the location of each parcel. Therefore, this paper proposes an empirical land pricing model to solve this irrationality and verifies its validity and applicability.

• Journal of the Korean Magnetics Society
• /
• v.11 no.3
• /
• pp.122-128
• /
• 2001

In this paper, we studied structural and magnetic properties of Ba-ferrite thin film deposited on Si(100) substrate with various underlayers. Ba-ferrite thin films with various underlayers were deposited by reactive RF/DC magnetron sputtering system at room temperature. various underlayers was reactive sputtered with O$_2$. After deposition, the thin films were annealed at 850 $^{\circ}C$ to get the crystallized sample. Underlayers were used to prevent interdiffusion from Ba-ferrite thin film to substrate. The growth of Ba-ferrite thin films was influenced by underlayers. Easy magnetization direction is in-plane. From these results the Ba-ferrite film with various underlayers can be used as longitudinal recording media.

• Journal of the Korean Magnetics Society
• /
• v.8 no.4
• /
• pp.224-230
• /
• 1998

The relationships between R-H curves of gaint magnetoresistance (GMR) spin valve trilayer films and M-H curves of each magnetic layer consisting of the trilayer films were analyzed and simple formula representing the relations between the curves were suggested for theoretical analysis and study of magnetoresistance (MR) in those films, especially where the MR is from the difference of coercivity. Using two kinds of NiFe/Cu/Co films, which had been deposited on Cu(50 $\AA$)/Si(111, 4$^{\circ}$ tilt-cut) and Cu(50 $\AA$)/glass, R-H and M-H curves were measured and compared with the calculated ones, which were obtained by appying the M-H curves of single NiFe and Co films, deposited on the same substrates, to the previously reported single-domain and multi-domain models. The calcuated ones were well consistent with the measured ones and the suggested simple relationships between R-H and M-H curves are thought to be very useful for the deep understanding of MR behavior and the reasonable approach to improve MR properties in GMR spin valve trilayer films.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.569-583
• /
• 2018

The purpose of this study is to identify the collapse characteristics by analyzing various factors causing collapse based on field survey and existing data on rock slopes occurring in the construction of roads and industrial complexes in Gyeongsangnam - do area. In the case of the slope where the slope has been directly surveyed, the analysis of the collapse characteristics can be used for the prediction and prevention of slope failure through the continuous collection of the slope data, database construction, management and analysis. The evaluation items used in the collapse characteristics of slope were selected among the items that can be regarded as objective evaluation items among the overlapping factors by comparing the evaluation items frequently used for the evaluation of the existing slope stability among various factors. The type of destruction of the rock slope depends on the type of carcass of the bedrock, such as planar fracture, wedge fracture, onho fracture, and conduction fracture, which are different from each other. And the slope stability analysis should be performed accordingly.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.148-148
• /
• 2020

산업의 고도화가 진행됨에 따라 화학원료의 사용이 증가하고 있고 독성을 가진 화학물질이 하천으로 유입되는 사고가 빈번하게 발생하고 있다. 수환경으로 유입되는 유해화학물질은 주로 무색무취의 물질들로 사고가 발생하더라도 초기 발견이 어려워 어류폐사를 유발하거나 취수시설에서 용수로 취수되는 경우가 발생하기 때문에 이에 대한 대응책 마련이 필수적이다. 하천에 유입된 오염물질의 거동을 신속하게 예측하기 위해 1차원 오염물질 추적 모형이 활용되는데, Fickian 이송-분산 모형(Fickian Advection-dispersion equation model; FADE)이 주로 사용되고 있다. 하지만 FADE는 오염물질이 하천 저장대에서 지체되는 현상을 반영하지 못하기 때문에 농도곡선의 왜곡도를 구현하지 못하는 단점을 가지고 있다. 따라서 본 연구에서는 하천저장대모형(River Storage Model; RSM)을 개발하고 이를 국가하천인 감천에 적용하였다. 본 연구에서 개발한 RSM은 분산계수, 본류대 면적, 저장대 면적, 저장대 교환계수의 네 가지 매개변수를 통해서 하천의 물질 저장 및 교환 특성를 구현한 non-Fickian 모형으로서, 생화학반응, 휘발, 흡·탈착항을 추가하여 유해화학물질의 혼합 거동을 정확하게 모의할 수 있도록 개발하였다. 저장대 모형의 매개변수를 산정하기 위해서 하천 유량과 지형자료를 기반으로 HEC-RAS를 모의하여 계산된 수리특성을 입력변수로 사용하였다. 저수기, 평수기, 풍수기 유량을 기준으로 세 경우의 시나리오 모의를 수행하였는데, 5ton의 톨루엔이 김천산업단지에서 감천으로 유입된 경우 약 20km 하류에 위치한 취수장에서 톨루엔의 농도변화를 예측했다. 보존성 물질에 대한 모의 결과, 풍수기의 경우 저수기에 비해 유속이 크기 때문에 취수장에서 20.56시간 먼저 기준농도에 도달하고, 7.21시간 더 짧게 머무는 것으로 나타났다. 유해화학물질의 반응특성에 대한 민감도 분석을 시행한 결과, 생화학적 반감기가 18.98시간보다 길고, 옥탄올-물 분배계수가 2.267 이하인 물질은 생분해 및 흡·탈착 반응에 둔감한 것으로 나타났다. 1m 수심 기준 0.114m/s 이하 유속에서의 하천 수리조건에서는 화학물질의 휘발성을 무시할 수 있는 것으로 밝혀졌다.

• Asia Marketing Journal
• /
• v.13 no.4
• /
• pp.77-103
• /
• 2012

Two experiments examined how product evaluations were affected by country-of-origin information presented with varying amounts of product-specific information. Consistent with social judgeability theory, participants were more likely to make COO-based judgments, once they felt like they had product-specific information and they were motivated to conform their judgments to socially shared standards of validity. The results of each experiment revealed that the presentation of COO information alone was not sufficient to draw judgments based on COO stereotypes. The findings were discussed within the framework of social-psychological models of impression formation.

• Journal of the Economic Geographical Society of Korea
• /
• v.26 no.4
• /
• pp.421-442
• /
• 2023

This research focuses on the fact that the characteristics of migration types of the youth in non-metropolitan areas vary by region and has the primary objective of comparing and analyzing the differences in determinants of each migration type. First, An exploratory analysis of the migration status and characteristics of the youth in non-metropolitan areas was conducted, and then a hierarchical logit model was used to estimate the determinants of migration types separately. The results showed that the characteristics of migration types vary by region, and each determinant of migration types is composed of different bundles of variables(individual and regional levels). In the future, policies aimed at securing young workforce in non-metropolitan areas will be more effective when they take into account various determinants of migration choices and reflect the regional context.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.846-855
• /
• 2002

Several soft white spring and winter wheat cultivars were evaluated by analyzing physicochemical properties such as Single Kernel Characterization System (SKCS), milling properties, Rapid Visco-Analyzer (RVA), mixograph pattern, and sugar-snap cookie-making potentialities. Results of SKCS revealed kernel hardness had a positive correlation coefficient with test weight $(r=0.497^{*})$ and near-infrared reflectance (NIR) hardness $(r=0.495^{*})$. SKCS kernel weight had a significantly high correlation of $r=0.942^{**}$ with SKCS kernel size. The test weight had significantly high correlations with straight-grade flour yield $(r=0.720^{**})$, break flour yield $(r=0.490^{*})$, flour ash content $(r=-0.781^{**})$, and milling score $(r=0.838^{**})$. The average RVA peak viscosity of the soft white winter wheat was higher (195.1 unit) than the soft white winter wheat varieties (135.7 unit). A correlation was found between RVA peak viscosity and swelling volume. Significant correlation coefficients were obtained among cookie properties, milling properties, protein content, and mixograph absorption. The cookie top grain score had a correlation coefficient of $r=0.447^{*}$ with swelling volume.