• Journal of KIISE
• /
• v.42 no.7
• /
• pp.910-918
• /
• 2015

This paper presents a parameter visualization technique to overcome the limitation of the naked eye in contrast-enhanced ultrasonography. A method is also proposed to compensate for the distortion and noise in ultrasound image sequences. Meaningful parameters for diagnosing liver disease can be extracted from the dynamic patterns of the contrast enhancement in ultrasound images. The visualization technique can provide more accurate information by generating a parametric image from the dynamic data. Respiratory motions and noise from micro-bubble in ultrasound data may cause a degradation of the reliability of the diagnostic parameters. A multi-stage algorithm for respiratory motion tracking and an image enhancement technique based on the Markov Random Field are proposed. The usefulness of the proposed methods is empirically discussed through experiments by using a set of clinical data.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.84-89
• /
• 2021

The alternative method for symmetric configuration in optical link consisted of dispersion management and optical phase conjugation for compensating of the distorted optical signals due to chromatic dispersion and nonlinear effects of standard single mode fiber is proposed. The symmetric configuration means number of fiber spans, dispersion distribution in former half section and latter half section, etc should be symmetrical about optical phase conjugator. In dispersion-managed proposed in this research, optical phase conjugator is located after former half section consisted of 6 fiber spans and before latter half section of 14 fiber spans, and the averaged residual dispersion per span (RDPS) of each half section are consistence. The compensation effects of the distorted signals in the proposed link is analyzed by comparing with the results obtained in dispersion-managed link with the unequally averaged RDPS of each half section. From the simulation results, it is confirmed that RDPS deviation between adjacent fiber span has a grater effect on the compensation than the equivalent of the averaged RDPS.

• Journal of Animal Science and Technology
• /
• v.49 no.5
• /
• pp.577-584
• /
• 2007

Adipocyte-specific secretory factor(ADSF)/resistin, an hormone, is a small cysteine-rich protein secreted from adipose tissue and ADSF/resistin has been implicated in modulating adipogenesis in human and rodents. Although the exact role of ADSF/resistin in bovine has not been identified, it may have directly or indirectly involved in adipocyte differentiation. The objective of this study was to investigate its DNA polymorphism associated with carcass traits in Korean Native Cattle(Hanwoo). To investigate DNA polymorphism in Hanwoo ADSF/resistin gene, blood samples were taken from 295 Hanwoo steers belonging to progeny testing at Hanwoo Improvement Center in Korea. Seven single nucleotide polymorphisms(SNPs) were found in intron regions but not in any other regions including promoter (1.7kb) and 4 exons. The highest frequency among SNPs was C186A(0.16/0.84) following G964A (0.156/0.884). The significant correlation(P<0.05) between the SNPs and economic traits was found on 764Ains associated with marbling but not from any other SNPs determined.  A computer simulation was also conducted to assess the efficiency of marker assisted selection(MAS) versus the conventional breeding scheme.  Results revealed that MAS was more efficient as a breeding tool compared to the conventional. In conclusion, ADSF/Resistin gene is one of candidate genes to evaluate the quality, especially marbling score, in Hanwoo.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.167-185
• /
• 1999

A series of model tests was performed to find the characteristics of lateral behavior of single rigid pile. This paper shows the results of model tests on the lateral behavior of single rigid driven pile in non-homogeneous(two layered) Nak-Dong River sands. The purpose of this paper is to investigate the effect of the ratio of lower layer thickness to embedded pile length, the coefficient ratio of the subgrade reaction and the pile construction conditions(driven & embedded piles) on the characteristics of lateral behavior of single pile. The results of model tests show that the lateral behavior in non-homogeneous soil depends upon drop energy considerably, that is, in the case of H/L=0.75, as the drop energy increases three times the decrease percentage increases about 2.12 times. In the driven pile with non-homogeneous soil of $E_{h1}/E_{h2}=5.56$, the effect of upper layer with large stiffness on the decrease of lateral deflection is remarkably smaller than embedded pile. In non-homogeneous soil, the maximum bending moment of driven pile is in the range of 100 132% in comparison with embedded pile. The reason is that the stiffness of soil around pile increases with drop vibration and so the pile behavior is similar to the flexible pile behavior by means of the increase of relative stiffness of pile, In this paper, the experimental equations for lateral load and H/L on $y_D/y_E \; & \; MBM_D/MBM_E$ are suggested from model tests.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.637-643
• /
• 2008

When planning outfall system, the first target cif design is to maximize initial dilution of discharge effluent. To achieve the target effectively, the characteristics of mixing phenomenon between ambient and discharged water should be analyzed. Especially the analysis at the Near-Field-Region(NFR) as initial dilution zone should be preceded. Usually, the initial behavior of effluent through outfall system is rising toward the surface due to mixing with ambient water for heat discharge and sinking toward the bottom due to the difference of density for brine discharge. After mixed with eddies accompanied by the ambient water, the plumes are showing the same density and internal current pattern by advection and diffusion. Until recently, lots of studies are being carried out for the optimum design of outfall system. but it is difficult to find any studies of heat and brine discharge at the same time. Therefore, this study is hoped to provide some basic data for optimum design of outfall system.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.443-454
• /
• 2013

Various metal ions (transition and base metals) incorporated MCM-41 catalysts can be synthesized using colloidal and soluble silica with non-sodium involved process. Transition metal ion-typically $V^{5+}$, $Co^{2+}$, and $Ni^{2+}$-incorporated MCM-41 catalysts were synthesized by isomorphous substitution of Si ions in the framework. Each incorporated metal ion created a single species in the silica framework, single-site solid catalyst, showing a substantial stability in reduction and catalytic activity. Radius of pore curvature effect was investigated with Co-MCM-41 by temperature programmed reduction (TPR). The size of metallic Co clusters, sub-nanometer, could be controlled by a proper reduction treatment of Co-MCM-41 having different pore size and the initial pH adjustment of the Co-MCM-41 synthesis solution. These small metallic clusters showed a high stability under a harsh reaction condition without serious migration, resulting from a direct anchoring of small metallic clusters to the partially or unreduced metal ions on the surface. After a complete reduction, partial occlusion of the metallic cluster surface by amorphous silica stabilized the particles against aggregations. As a probe reaction of particle size sensitivity, carbon single wall nanotubes (SWNT) were synthesized using Co-MCM-41. A metallic cluster stability test was performed by CO methanation using Co- and Ni-MCM-41. Methanol and methane partial oxidations were carried out with V-MCM-41, and the radius of pore curvature effect on the catalytic activity was investigated.

• Journal of the Korean Society of Radiology
• /
• v.10 no.3
• /
• pp.153-159
• /
• 2016

This study investigated relationship between secondary electrons produced from single gold nanoparticle as a result of its interaction with radiation and particle size and incidence energy, provided basic data related to the dose enhancement effect based on gold nanoparticles. Monte Carlo simulation was applied by using MCNPX MC code, 50, 100, 150 kV and 6, 15 MV x-ray energy was used. In a water phantom, single gold nanoparticles that are 30, 50, 70, 90, and 110 nm in diameter were placed and the tally volume was designated at every 10 nm. Difference in electrons produced from gold nanoparticles was normalized based on absence of nanoparticle. When the X ray energy decreased and the diameter of gold particles increased, more electrons were produced. When the energy was lower, in the linear formula related to nanoparticle size and electron production, the gradient was higher. And, in comparison to the MV X-ray, at kV X-ray, significantly more electrons were produced. This study can be used as data to understand the dose enhancement effect based on gold nanoparticles, and further research related to various materials that dose enhancement including gold nanoparticles needs to be conducted.

• Journal of Plant Biotechnology
• /
• v.41 no.2
• /
• pp.100-106
• /
• 2014

In order to develop an efficient in vitro micropropagation technique for a rare plant species, Astragalus membranaceus Bunge var. alpinus N., shoot proliferation and in vitro or in vivo rootings were conducted and hyperhydrated leaf generated from cultures was histologically observed. During shoot induction, no distinct effect on multiple shoot induction was found between BA and kinetin treatment. BA enhanced the number of internodes, whereas kinetin stimulated shoot elongation. Hyperhydrated leaf composed of bigger cells and retarded palisade parenchyma and showed irregular cell arrangement compared to normal leaf. Especially starch content in hyperhydrated leaf was significantly reduced. The best rooting rate was achieved by B5 medium among three different medium (B5, MS and WPM) and 0.1mg/L IBA treatment induced the highest rooting ratio (80%). No statistical difference was induced by explant types (apical bud or axillary bud) in terms of rooting ratio. In vivo cutting induced rooting rate up to 65% by 0.5% IBA/Talc powder treatment. Although in vivo rooting rate was less efficient compared to in vitro rooting, better survival rate was observed after soil acclimatization. Present study suggested that above micropropagation techniques can be used for rapid multiplication as well as in vitro or in vivo conservation of the species.

• Journal of dental hygiene science
• /
• v.17 no.1
• /
• pp.46-55
• /
• 2017

Many people in Korea suffer from a fear of dental treatments; however, only a few studies have focused on this population. This study assessed the effectiveness of cognitive behavioral therapy (CBT) and its interventions in reducing dental anxiety, especially when administered by trained dental staff. Using case studies, the authors analyzed the content of each session and examined the process of reducing dental anxiety. First, the authors observed that the results of both dental fear scale and subjective unit of disturbance decreased significantly with changes in cognitive distortions related to dental anxiety and that rapid improvements were noted after two therapy sessions. Second, the study reported that practicing relaxation (deep-breathing) and muscle relaxation techniques; using hand signals to indicate anxiety or discomfort; establishing an empathic relationship with the therapist; making an anxiety list; and graded insensitive and exposure along with rehearsal, were effective in coping with dental anxiety and in changing negative thoughts towards the dentist. Third, a simple cognitive behavioral intervention can be effective in reducing dental anxiety. In summary, a short-term, five-session psychological intervention with CBT produced a sustained decrease in the symptoms of dental anxiety, allowing the patients to receive the required procedures. The authors discussed the study limitations and the implication of their results on future research.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.244-248
• /
• 2008

홍수량산정과 관련하여 국내 실무에서 어려움을 겪는 가장 큰 문제는 설계강우의 결정이다. 설계강우와 관련하여 세부적으로 살펴보면 크게 강우의 시간분포(예를 들면 Huff, Mononobe, 교호블록 등), 강우의 공간분포(ARF 적용 등)의 두가지 문제로 집약될 수 있다. 본 논문에서는 강우의 시간분포와 공간분포에 관련된 문제를 동시에 해결할 수 있는 방법으로 교호블록형 이동설계강우에 대한 적용 방법을 제안하고 그 적용성을 검토하였다. 본 연구에서는 국내에서 연구된 강우의 이동속도와 여름철 저기압기단과 태풍의 이동속도 등을 감안하고 나아가 표준화된 방법으로서 적용의 용이성 등을 고려하여 강우의 이동속도 $\upsilonv\;=\;10km/hr$, $\Delta\;=\;10km$ 간격으로 직사각형 띠 형태로 연결되는 이동강우를 채택하였다. 강우의 이동방향은 서$\rightarrow$동, 남$\rightarrow$북, 남서$\rightarrow$북동의 3가지 방향을 기준하였다. 유역특성 이동강우 3가지(서$\rightarrow$동, 남$\rightarrow$북, 남서$\rightarrow$북동)와 정체강우 2가지(유역평균, 유역특성) 등 총 5가지 경우에 대하여 100년 빈도 48시간 설계강우를 한강유역의 분포형 강우-유출 모형에 적용하여 그 결과를 분석하여 다음과 같은 결론을 얻었다. (1) 정체강우에 있어서 유역평균강우와 유역특성강우에 대한 홍수량 비교를 통하여 해당 유역의 홍수량과 강우량과의 관계를 판단할 수 있었다. 충주댐유역의 경우 한강유역 전체에 대한 평균 100년 빈도 강우가 내린다면 23,000cms까지도 발생할 수 있으나 충주댐유역 100년 빈도에 해당하는 강우량으로는 18,000cms 정도의 홍수량이 발생하여 상대적으로 강우량이 적은 지역으로 나타났다. 반면에 임진강하류부는 한강유역평균강우 보다 더 많은 강우량이 내림으로 인하여 홍수량이 증가하는 유역임을 알 수 있었다. (2) 이동설계강우에 대하여 분석한 결과 유역이 매우 크거나 매우 작으면 강우의 이동방향에 대한 영향이 상대적으로 감소해가는 반면에 중규모 유역에서 상대적으로 영향이 크게 나타났다. 한강하구와 같은 대유역의 경우 여러 방향의 유역들이 유출에 기여하기 때문에 강우의 이동방향에 대한 영향이 상쇄되기 때문으로 분석되었다. 반면에 매우 작은 소유역의 경우는 전체 유역이 단일 강우강도의 영향권에 놓이게 되므로 이동방향의 영향이 나타나지 않는 것으로 나타났다. (3) 정체설계강우와 이동설계강우의 비교를 통하여 한강하구와 같은 대유역의 이동강우에 대한 ARF 효과를 간접 측정할 수 있었다. (4) 정체설계강우 보다 이동설계강우가 오히려 더 큰 첨두홍수량을 발생시키는 유역들이 있었다. 이와 같은 수문현상은 기존 정체형 설계강우로는 분석이 어려운 현상으로서 강우와 유역특성에 대한 보다 심층적인 연구 필용성을 제기하고 있다.