• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.280-285
• /
• 2007

Based on the multimode fiber taper, a mode size converter for effective optical beam coupling between laser and optical fiber or between the two different optical fibers has been proposed and demonstrated. The device has a multimode input end and a single mode output end. The influence of various parameters, including device structure and launching conditions, on the coupling efficiency has been theoretically analyzed. The theoretical results revealed that the gaussian beam can be coupled into a single mode fiber without considerable insertion loss. The proposed multimode fiber taper has been fabricated using heating and pulling equipment incorporating two micro-torches. Experimental results showed that an optical beam with $50\;{\mu}m$ of large beam size was effectively coupled into single mode fiber through the multimode fiber taper. The insertion loss of the device was 1.3 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.6
• /
• pp.462-469
• /
• 1988

Choromatic dispersion of single mode optical fibers limits the maximum bit rate in the single mode optical transmission systems. In this paper we calculate chromatic dispersion and dispersion parametes(zero dispersion wavelength, dispersion slope) for concatenated single mode optical fibers form the chromatic dispersion and dispersion parameters of individual single mode optical fibers, and compare theoretical valuse with those measrued by double demodulation method. Calculated values are coincident with measured ones reasonably. The standard deviation is 0.77-1.28nm for zero dispersion wavelength and 0.56-0.75PS/km.nm2 for dispersion slope. The standard deviation of zero dispersion wavelength is inverse proportional to the optical fiber lenght.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.2
• /
• pp.15-18
• /
• 1979

Deposited film of a transition metal, Ti was diffused into LiNbO3 crystals to form integrated optical waveguides. By suppressing L O out -diffusion, single-mode waveguides could be constructed. Measurements on characteristics were performed by using the prise coupling technique and a He-Ne laser. ( λ = 0.6328 $\mu$m)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.1
• /
• pp.57-63
• /
• 1991

In this paper, propagation characteristics of W-type single mode fiber with dual shape core is investigeted theoretically. Design parameters of DSC(dual shape core) W-type single mode fiber with very low dispersion over a wide wavelength range are computed using scalar approximation. The results have larger core radius and stronger confinement for mode field distribution in core than conventional W-type fiber with single shape core.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.112-114
• /
• 2019

본 논문에서는 DC 배전 시스템을 위한 새로운 다중 모드 단일 인덕터 회로를 제안한다. 제안하는 컨버터는 벅 컨버터에 배터리 스위칭 셀이 병합된 구조로서, 단일 인덕터를 사용하여 두 개의 출력 제어가 가능하다. 기존의 회로와 비교해보았을 때, 전체 소자수가 증가하였음에도 불구하고 감소한 인덕터 개수로 인해 전체 시스템의 가격 저감에 효과적이며 높은 전력밀도를 달성할 수 있다.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.233-236
• /
• 1999

We have constructed a narrow-linewidth single-longitudinal-mode unidirectional $Er^{3+}$ -doped fiber laser using a fiber Bragg grating incorporated by a three port optical circulator with a compact configuration. Using a conventional delayed self-heterodyne detection technique with Mach-Zehnder interferometer a linewidth of 5 kHz was measured. In a single-longitudinal-mode operation, output power of up to 2.7 mW at 1548 nm were obtained for a launched pump power of 43 mW at 980 nm.

• Korean Journal of Optics and Photonics
• /
• v.30 no.1
• /
• pp.15-22
• /
• 2019

$Si_3N_4$ rib-optical waveguides for evanescent-wave integrated-optical biosensors were analytically interpreted, to derive the single-mode propagation conditions. The integrated-optical biosensor structure based on two-mode interference was proposed, and the rib width and thickness and core thickness for a single-mode and two-mode waveguide (sensing region) were proposed to be $3{\mu}m$, 2 nm, and 150 nm and $3{\mu}m$, 20 nm, and 340 nm respectively. The optical characteristics of each guided-wave mode were investigated utilizing the film mode-matching (FMM) analysis.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.2
• /
• pp.1-5
• /
• 1985

In this paper, temperature-induced optical phase shifts in single-mode fibers are studied both analytically and experimentally. Temperature sensor using single-mode fiber interferometer is designed and the temperature sensitivity of the sensor system is investigated. This fiber-optic temperature sensor which employs the Mach-Zehnder arrangement is a high sensitivity sensor of phase detection type. In this type, temperature changes are ob-served as a motion of an optical interference fringe pattern. In the measurements using interferometer, one of the important problems is to detect simultaneously the number and direction of fringe displacement resulting from physical perturbations (temperature, pressure, etc.). To realize this, the array detector using multi-mode fiber is designed. By this array detector the number and direction of fringe displacement is Ineasured very conveniently.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.226-226
• /
• 2003

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.248-249
• /
• 2000

최근 "혼돈제어"라는 몇 가지 방식이 증명되어 여러 시스템에서 혼돈스런 출렁임을 제거하게 되었다. 처음으로 OGY(Ott Grebogi Yorke) 방법에 기초를 둔 Occasional Proportional Feedback(OPF) 방식이 Roy에 의해 고체레이저 system 에 적용되었다$^{(1)}$ . 또 High Frequency Injection(HFI) 방식으로도 혼돈을 제어할 수 있음이 발표되기도 했다$^{(2),(3)}$ . 우리의 실험에서는 단일모드로 발진하는 Nd:YAG 레이저에서 일어나는 혼돈현상을 관측하려 한다. (중략)