• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.13-13
• /
• 1996

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.372-373
• /
• 2004

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.02a
• /
• pp.351-352
• /
• 2006

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.133-135
• /
• 2006

We propose and fabricate a novel fiber optic sensor for the detection of abnormal structural signals from various constructions. It's advantages are highly sensitive. small in dimension and electro-magnetic immune. Since this sensor was simply constructed with a single-mode fiber at infra-red wavelength and a laser-diode with the wavelength of 625 nm, the modes in the end of the optical fiber were not show as Gaussian distributed. So, we used the change of the mode distribution to get the sensor output by the external abnormal effect of structures. We investigated the resonance by performing the bending test of an aluminum beam attached with the fiber sensor. In the test, we could obtained a feasible signal to sense the abnormal condition of structures.

• Korean Journal of Optics and Photonics
• /
• v.22 no.2
• /
• pp.108-113
• /
• 2011

In this paper, we propose the complex differential diagram to classify surface plasmon waveguide modes with single interface. To date, surface plasmon waveguide modes are classified using the sign change of the group velocity in the dispersion relation that describes the interrelations between the real wavenumber of the propagation direction and the photon energy. The surface plasmon waveguide modes have the wavenumbers of the direction perpendicular to that in which the wave propagates as well as of the propagation direction, so it is necessary to classify the modes using all of these wavenumbers. The complex differential diagram is a graphical representation with variables of the difference between the real component and the imaginary component of the wavenumber. Using this diagram, the specific mode classification is possible, and it is easy to comprehensively analyze the wavenumber as the function of the photon energy.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.280-281
• /
• 2000

Internet사용자의 급격한 증가에 따라 저가격이며 대용량의 optical access network의 구축이 시급한 실정이다. 광통신의 infrastructure를 구성하기 위해서는 광모듈의 저가격화가 가장 시급한 문제이다. 광모드 변환기가 집적된 반도체 레이저(SSC-LD)는 단일모드광섬유와의 광결합 손실 및 정렬허용오차, 동작시간, 광출력 등을 향상시킬 수 있어, 광가입자계 광송수신모듈의 가격을 낮출 수 있어 최근 매우 활발히 연구되고 있다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.268-269
• /
• 2001

반사형 액정표시장치는 저전력 휴대용 표시장치 시장이 급격하게 성장함에 따라 큰 주목을 받고 있다. 현재 반사형 액정표시장치는 밝기면에서 우수한 특성을 갖는 mixed mode TN(MTN)과 reflective TR(RTN)과 같은 단일편광자를 이용한 액정모드를 기본적으로 사용하고 있다. 그러나, 이러한 액정모드는 이중편광자를 이용한 액정모드와 비교해서 dark 상태에서 누설광이 많이 발생하여 대비비가 저하되는 단점이 있다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.669-673
• /
• 2003

We fabricated a buried-ridge waveguide laser diode (B-RWG LD) which has more advantages for obtaining lateral single mode operation on the same ridge width and for the planarization of the device surface, compared to the conventional RWG LD. In this LD, the difference of the lateral effective refractive index can be controlled by the thickness of the InGaAsP layer which is grown on the active and the p-InP layers. The InGaAsP multiple quantum well was grown on a n-InP substrate by the CBE. The buried ridge structure was formed by selective wet etchings, followed by liquid phase epitaxy methods. The fabricated LD with the ridge width of 7 ${\mu}{\textrm}{m}$ showed a linear increase of the optical power up to 20 ㎽ without any kinks and a saturated output power of more than 80 ㎽. By measuring the far field pattern, we demonstrate that LDs with the ridge widths of 5 ${\mu}{\textrm}{m}$ and 7 ${\mu}{\textrm}{m}$ were operated in a lateral single mode up to 2.7I$_{th}$ and 2.4I$_{th}$, respectively.ely.

• Korean Journal of Optics and Photonics
• /
• v.19 no.2
• /
• pp.140-143
• /
• 2008

The integrated external cavity laser has been fabricated with a 1550 nm FP-LD, an optical filter, a micro ball lens and accurate ceramic blocks using a micro-block stacking (MBS) technique. The integrated external cavity laser module whose size is only $2.0{\times}2.1{\times}0.7\;mm^3$ has been mounted on the TO-CAN package. For the case of the 1.8% transmission filter, the single mode characteristic has been obtained with the optical power of -27.1 dBm and the SMSR of 31.7 dB.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.1
• /
• pp.39-46
• /
• 2002

High-senstivity temperature sensor based on the wavelength selectivity of single mode fiber-to-planar waveguide coupler, was demonstrated. The resonant wavelength of the coupler was shifted with large rate of -3.43nm/$^{\circ}C$ owing to good thermo-optic effects of polymer planar waveguide. The device design technique to reduce the polarization dependent properties and increase the temperature sensitivity was presented.