• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.198-203
• /
• 1999

In this study, chip-tool friction and shear characteristics of cold drawn free machining steels in turning were assessed. To do this, a newly developed equivalent oblique cutting model was adopted. And for comparison with those of free machining steels, chip-tool friction and shear characteristics of conventional carbon steels were also investigated. The Pb-S free machining steel shows superior machinability to others. In case of the Bi-S free machining steel, the shear stress and the specific friction energy are relatively lower than those of conventional carbon steels, but its shear strain is relatively high, so it does not show any remarkable improvement of machinability.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.190-196
• /
• 1999

In this study, a procedure for analyzing chip-tool friction and shear processes in 3-D cutting with a single point tool has been established. The edge of a single point tool including circular nose is modified to the equivalent straight edge, then 3-D cutting with a single point tool is reduced to equivalent oblique cutting. Transforming the conventional coordinate systems and using the measured three component of cutting forces, force components on the rake face and the shear plane of the equivalent oblique cutting system can be obtained. And it can be possible to assess the chip-tool friction and shear characteristics in 3-D cutting with a single point tool.

• 한국정밀공학회지
• /
• 제12권4호
• /
• pp.19-27
• /
• 1995

Face milling is required to study cutting process with a view of multipoint cutter. This experimental study mainly deals with the single and multi-insert cutting characteristics using coated tool. Because metal cutting of the single and multi-insert has a large relation to the improvement of productivity, the economic cutting process can be achieved by the analysis of proper metal cutting mechanism. Therefore, machining characteristics of face molling in this paper has been studied by investigating the role of different insert number which is concerned with mean cutting force, the RMS values of AE(acoustic emission) signal, tool life and surface roughness in milling SS 41 and SUS 304. The cutting force and AE signal are monitored to make an analysis of cutting process. The surface roughness of the specimens machined by inserts of different numbers is measured at different speeds, feeds and depth of cut. The width of flank wear is also observed.

• 한국산학기술학회논문지
• /
• 제15권4호
• /
• pp.1871-1878
• /
• 2014

폴리메틸메타클릴레이트(PMMA)는 광 관련 부품제조에 있어 중요한 재료로 많이 사용되고 있다. 특히 TV, 모니터, 휴대폰 등에 쓰이고 있는 디스플레이의 도광판(Light Guide Panel)에 적용되고 있어 현재까지는 매우 큰 상업적인 수요가 있다. PMMA 도광판의 가공은 일반적으로 고속밀링에 의해 이루어지는데 부품에 대한 높은 정밀도 요구특성에도 불구하고 가공표면의 굴곡, 균열 등에 대한 불량이 적지 않게 발생하고 있다. 이러한 문제점을 해결하기 위하여 PMMA 진동을 부가하는 고속선삭의 적용이 시도되었으며 절삭공구에 진동을 부가하기 위한 장치와 최적 조건이 조사되었다. 도광판용 PMMA의 진동절삭은 일반적인 밀링가공법에 비해 절삭력의 현저한 감소, 열변형영역의 축소 등을 유도하였다. 가공면에 있어서는 가공방법이 엔드 밀링에서 단인공구를 사용하는 선삭으로 변경되었음에도 불구하고 진동절삭법에 의해 가공표면의 균일성이 크게 향상되어 가공면의 표준편차 $1.0{\sim}6.0{\mu}m$, 평균거칠기 $0.3{\mu}m$가 달성되었다.

• 한국생산제조학회지
• /
• 제20권1호
• /
• pp.86-95
• /
• 2011

Ultra-precision machining technology is the essential core technology in today's micro-electronics and electro-optical industries. The needs for processing systems to manufacture products to nanometer(nm) accuracy and sub-nanometer resolutions are increased recently. By using ion beam, it is possible to fabricate ultra-precision and ultra-fine products with nm accuracy and sub-nm resolution. In this paper, the basic research trends of ultra precision machining technology in domestic are surveyed, and the ways to reach to the world-leading level of basic research capabilities in the field of ultra-precision machining technology in domestic is suggested.