• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.562-570
• /
• 2020

This study explores manufacturing technology and basic properties of high strength cement composites at 2,000kg/㎥ of specific weight. It is suggested that lightweight-high strength cement composites can be produced by substituting silica sand in ulta-high performance concrete mixture with lightweight materials such as solid bubbles and lightweight fine aggregates. The 28-day compressive strengths of cement composites with solid bubbles were from 116MPa to 141MPa at below 2.0g/㎤ of unit density while the cement composites with lightweight aggregates possessed lower compressive strength and higher unit density. The specific weight calculated from mixture proportions did not have significant difference with unit density of hardened cement composites, indicating that unit density of hardened cement composites can be estimated from the specific weight in mixture proportions.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.2
• /
• pp.15-25
• /
• 2015

As the physical and mechanical properties of lightweight air-mixed soil change in the procedure of transportation of mix truck, it is necessary to assure whether the properties during construction satisfy those in design. In this study, variations of properties of mixed soil after transportation by mix truck are proved by field test. Lightweight air-mixed soil used field test the unit weight of $9.0{\pm}1.0kN/m^3$, the flow value of $190{\pm}20mm$ was produced. To analyze variations of properties of mixed soil the unit weight and flow value of the sample before and after transport was measured unconfined compressive strength tests were performed. Mixing time was 19~175 minutes diversified. As the test results, it is known that the density, the flow value and the unconfined compressive strength of lightweight air-mixed soil change by transportation, but these values satisfy the specifications of material of air-mixed soil. After transportation the average value of the unit weight and flow value change in the flow of the $(+)0.10kN/m^3$, 4.8 mm respectively, the average change in the unit weight and the flow value due to the mixing time was constant. And unconfined compressive strength of 28-day specimen increases from 20 to $150kN/m^2$. But, these values do not have some clear relationship with the transportation time within 175 minutes which is longest test time. Consequently, Within 175 minutes the changes of properties by transportation are too small to show some problems in the construction field.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.529-536
• /
• 2014

Physical characteristics of cement-admixed clay such as water content, specific gravity, unit weight and void ratio are main factors for strength, compressibility and prediction of consolidation behavior. In the past, the physical characteristics of admixed soils could be understanded through complex laboratory tests and field survey after construction. In this study, the tests were performed with conditions such as clay water contents 0%-170%, cement contents 5%-25% and curing period 3-90days after that analyzed for changes which are water content, specific gravity unit weight and void ratio of admixed soils. A prediction of properties through mechanical relationships with clay in situ water content, cement content and curing period could be proposed using the test results. The prediction equation of void ratio of admixed soils was derived using void ratio equation in geotechnical engineering and compared with test results of bangkok clay and then this study could be verified.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5C
• /
• pp.193-198
• /
• 2012

Field and laboratory tests were performed to investigate the swelling(L value) and shrinkage modulus (C value) of soil and rock mixtures using 2 sites. According to test results, when disturbed soil and rock were mixed with same amount (5:5), the maximum density was achieved and showed 19% and 18% increased at each site comparing with the unit weight of rock only. Since measured L values of mixtures were overestimated about 4 to 11% compare to estimated values based on the conventional method. While C values were underestimated about 13~20% compare to conventional values due to the development of compacting equipments and effective construction management. When rock and soil were mixed in the ratio of 5 to 5, the unit weight of the mixture was higher than that of other mixtures and rock or soil only.

• International Journal of Highway Engineering
• /
• v.6 no.3 s.21
• /
• pp.55-64
• /
• 2004

Maximum dry unit weight, ${\gamma}_{dmax}$, is the most important engineering properties for subgrade soil. Existing models to predict ${\gamma}_{dmax}$ containing many parameters, seem to be rather complex. This paper presents new simple models to predict ${\gamma}_{dmax}$. for sandy soils, A number of sieve analysis and compaction tests for 36 types of sands were conducted to develop the regression-based models. Parameters used to estimate ${\gamma}_{dmax}$ are both the geometric mean and geometric standard deviation of the soils, or the particle-size distribution curve parameters. Maximum dry unit weights predicted by the models are in good agreement with the laboratory measurements for the soil samples obtained at 16 locations within the Korea.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.337-338
• /
• 2023

본 논문에서는 유류 오염물의 흡수 반응이 가능한 반응재료에 대하여 지중 구조 재료로서의 적용성 검토를 목적으로 배합조건에 따른 다짐시험을 실시하였다. 다짐시험 결과, 주요 반응물질이 최적함수비에 미치는 영향은 미미하였으나, 최대건조단위중량의 영향인자로 평가되었다.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.1
• /
• pp.39-47
• /
• 2013

With the increase in the application of CLSM using coal ash, we performed a basic research on CLSM material, laying focus on the correlation between compressive strength and unit weight of lightweight foamed CLSM. The unconfined compression strength is a criterion for the judgment of the possibility of re-excavation and an important factor determining the economy, efficiency, and excavation character. However, to know the quantitative compression strength value takes a certain amount of time, because the applicability of unconfined compression strength of CLSM is judged by the standard of 28days. Therefore, in this study the relation between compressive strength and unit weight (foam slurry unit weight, apparent unit weight) is analyzed focusing on lightweight foamed CLSM. We also suggested a formula which can easily predict the 28-day compressive strength only using unit weight value without the need to cure the slurry for 28 days.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.10
• /
• pp.73-82
• /
• 2011

Coal ash of industial by-products was not recycled about 30% in total emissions. Moreover, it caused environmental pollution as well as wasted unnecessary expenses and time. Currently, fly ash(FA) is recycled as construction material however ponded ash(PA) is mostly buried. Lightweight foamed Controlled Low-Strength Materials(CLSM) evaluated in this study reduces unit weight by mixing foam in the traditional Controlled Low-Strength Material and has lightweight and flowability to be available for backfill materials in construction. Flow test, unconfined compressive strength test, and foamed-slurry unit weight test were performed in this study and the applicability of lightweight foamed CLSM for construction materials was evaluated. The results indicate that the mixture ratio(PA:FA) ranging from 70:30 to 50:50, cement of 7%, foam of 2~3%, and water content of 26.5~29.5% were required to satisfy the following standards such as flow value(i.e., 20cm), unconfined compressive strength(i.e., 0.8~1.2MPa), and foamed-slurry unit weight(i.e., $12{\sim}15kN/m^3$).

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.950-957
• /
• 2023

Purpose: The response technology is needed to prevent the spill of highly toxic oil contaminants in advance. Therefore, this paper described the results of an experimental study to predict the engineering properties of the developed reactive material. Method: Compaction tests and spectral information acquisition experiments were conducted on the reactive materials, and the results were evaluated. In addition, the correlation between spectral information and maximum dry unit weight was analyzed to evaluate the possibility of predicting the engineering properties for reactive materials. Result: The compaction test results showed that the maximum dry unit weight was in the range of approximately 9kN/m³ to 10kN/m³. The spectral information confirmed that the maximum reflectance decreased as the polynorbornene decreased. Conclusion: It was confirmed that the maximum dry unit weight of the reactive material for absorbing oil contaminants can be predicted using the maximum reflectance according to the component ratio of the reactive material.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.1
• /
• pp.39-47
• /
• 2023

The demand for lightweight and high-strength materials is increasing. However, studies on the bond of concrete and reinforcing bars for high-strength lightweight concrete with a compressive strength of 120 MPa and a unit weight of 20 kN/m³ to structural members are lacking. Therefore, in this paper, 108 specimens of high-strength lightweight concrete with a compressive strength of 120 MPa and a unit weight of about 20 kN/m³ were fabricated, a direct pull-out test was performed, and the bond characteristics were evaluated by comparing the test results with design code. Compared to the decrease in unit weight, the solid bubble shows relatively little reduction in compressive strength and modulus of elasticity. It was f ound to have larger slip and parameter values than concrete with low compressive strength and unit weight.