• Composites Research
• /
• v.29 no.1
• /
• pp.33-39
• /
• 2016

In this study, geometric modeling and finite element analysis of 3-dimensional plain weave composite unit cell consisting of 3 interlaced fiber tows and resin pocket were performed to predict effective properties. First, tow properties were obtained from micro-mechanics finite element unit cell analysis, which were then used in the meso-mechanics analysis. The effective properties were obtained from a series of unit cell analyses simulating uniaxial tensile and shear tests. Analysis results were compared to the analysis and experimental results in the literature. Various crimp angles were considered and the effect on the effective properties was investigated. Initial failure strengths and failure sequence were also examined.

• Composites Research
• /
• v.24 no.2
• /
• pp.9-13
• /
• 2011

,In this paper, the symmetric axis parameter method, which was proposed to identify defects, dislocations and stacking fault, with perfect structures in the zinc-blende materials, was introduced as a way to distinguish between elastic and plastic deformation. LAMMPS, a molecular dynamics programme of Sandia National Laboratories, was used to perform nanoindentation simulation on silicon, a zinc-blende material. Defects in silicon (111) under spherical indentation showed the threefold pattern and the slip system in the form of ring crack. Also simulation results show good agreement with experimental results and existing theoretical analyses.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.2
• /
• pp.59-65
• /
• 2010

The simple supported reinforced concrete slab bridges are analyzed by the specially orthotropic laminates theory. This method, however, may be too difficult for some practising engineers. In this paper, the result of analysis for such plate by means of the beam theory with unit width is reported. By using the "correction factor", the accurate solution for the plate can be obtained by the beam theory. By using the "correction factor", the accurate solution for the plate can be obtained by the beam theory. The plate aspect ratio considered is from 1 : 1 to 1 : 6. The result of this paper can be used for simply supported slab bridges analysis.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.93-101
• /
• 1993

This paper deals tilth an efficient algorithm in spectral fatigue analysis of ship structures. The concept of stress influence coefficients is suggested in order to obtain stress transfer functions efficiently which are the structural responses for unit load components. Strip method is applied to obtain the motion response and pressure distributions exerted on the hull. Since a number of the structural analysis should be performed for the various wave frequencies and heading angles in the spectral analysis, the algorithm developed in this study improves the efficiency of the analysis. Finally, the calculation example with application to this concept is shown in this paper.

• Journal of the Korea Society for Simulation
• /
• v.26 no.1
• /
• pp.47-54
• /
• 2017

This research explains a simulation method of cable crosstalk using Microwave Studio(MWS), Matlab and analyzes the crosstalk of Twisted Wire Pairs(TWP) applied to the aerospace or the military. TWP have a periodic configuration of long twisted wires along a axis. It is impossible to conduct the simulation of TWP due to the increased meshs according to the long length configuration. Transmission matrix(T-matrix) cascading method which is suitable to analyze the periodic configuration has been adopted to get the crosstalk of total cable so that the total simulation time has been decreased. In this paper, the crosstalk analysis of TWP including the connector modeled to straight sections has been performed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.402-410
• /
• 2022

The present study introduces a calibration method of the CSC model implemented in the LS-DYNA program for considering the material properties of ultra-high performance concrete(UHPC). Based on previous experimental studies, various parameters, which constitute three shear failure surfaces, pressure-volumetric strain curve, fracture energy, dynamic increase factor(DIF), and so on, are modified. Then, the proposed calibration method is verified by comparing the numerical result with the experimental data through the single element analysis. In addition, based on the established finite element models, the applicability of the calibrated CSC model is examined for UHPC structures subjected to impact and blast loadings.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1265-1271
• /
• 2011

In this study, the safety of a rack structure was evaluated through seismic analysis considering fluid-structure interactions using a finite-element model. The rack structure was immersed under water, so it was influenced by the water. The fluid-structure interaction can be specified in terms of the hydrodynamic effect, which is defined as the added mass per unit length. Modal analysis and seismic analysis using the Floor Response Spectrum (FRS) were carried out under Operating Basis Earthquake (OBE) and Safe Shutdown Earthquake (SSE) conditions. The analytical maximum displacements of the rack structure were 0.29 and 0.36 mm under OBE and SSE conditions, respectively. The maximum stresses were 17.9 MPa under OBE conditions and 19.6 MPa under SSE conditions; these results corresponded to 23 % and 14% of the yield strength of the applied material, respectively.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.16-16
• /
• 2017

국내 농업인구 감소 대비 식품소비량이 증가함에 따라 농가의 인력을 대체하고 다양한 작업이 가능하며 가격이 저렴한 국내 기계화 기술이 필요하다. 무동력 디스크해로우 작업기는 경운과 배토가 가능한 복합작업기로서 작업기를 구성하는 주요 구성품들은 필드작업에 의해 발생되는 하중에 구조적 강도와 신뢰성이 충분히 확보되어야 한다. 또한, 실제로 필드 작업 시 작업기에 걸리는 하중은 복합하중 형태로 전달되기 때문에 단순한 형태 하중에 비해 하중계측에 어려운 점이 있으므로 하중계측점의 선정이 매우 중요하다. 본 논문에서는 하중계측점을 선정하기 위하여 복합기의 주요 구성품인 치즐(chisel) 및 디스크해로우암(disk harrow arm)에 대하여 구조해석을 수행하였으며, 3축 방향의 단위하중 응력 계산결과로부터 load reconstruction을 위한 스트레인 게이지 위치를 선정하였다. 또한, 스트레인 게이지의 신호가 하중해석에 적절한 값이 되도록 기존의 형상을 수정하였다.

• Journal of the Mineralogical Society of Korea
• /
• v.8 no.2
• /
• pp.57-72
• /
• 1995

춘천 지역 선캠브리아기의 구봉산층군 내의 백운석질 대리암에는 광역변성작용의 산물로서 조립질의 투각섬석이 주된 규산염 광물상을 이루며 산출된다. 이들은 배태 층준과 원암의 조성에 따라 두 가지 유형으로 구분된다. : (1) 투각섬석(흑회색)+방해석+백운석+활석, (2)투각섬석(백색)+금운모+백운석+방해석+K-장석, 백색의 투각섬석이 흑회색형보다 상대적으로 높은 Al과 알칼리 함유도를 보이지만, 전반적으로 모두 Mg-단종에 가까운 화학 조성을 갖는다. 투각섬석들이 격자 구조상의 결함 구조를 갖지 않는데 비해서, 금운모는 1M 구조형을 이루고 저면 격자 간격상에 녹니석 단위의 빈번한 개재에 의한 격자상의 구조적 결함이 흔히 관찰된다.방해석-백운석 지온계에 대한 연구와 TWEEQU 프로그램을 이용한 상평형도 작성을 통해서, 투각섬석들은 500~$600^{\circ}C$의 온도 범위, 8kb 정도의 압력 및 Xco2=0.2~0.5 조건에서 생성된 것으로 해석하였다. 이 지역의 투각섬석은 위와 같은 조건에서 지속적으로 평형 상태가 유지되고 상안정도가 증대되므로서, (1) 투휘석을 수반하지 않고, (2) 격자 구조상의 결합을 갖지 않는, (3) 자형의 큰 결정을 이루게 된 것으로 해석된다.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10b
• /
• pp.670-672
• /
• 1999

인터넷의 빠른 보급으로 인해 교육용 시스템은 독립형 교육시스템에서 최신의 정보를 실시간으로 얻을 수 있는 웹 기반 교육시스템으로 변화하고 있다. 본 연구에서는 학습자들이 제공한 프로그램을 관리자가 교육시스템내에서 구조체와 함수 단위로 분석한다. 분석된 구조체와 함수는 구조체 파일과 함수 파일로 파일 시스템에 저장되고, 저장된 구조체 파이과 함수 파일의 정보는 데이터베이스에 추가된다. 그 후, 제공된 소스 파일을 HTML문서로 변환하는 과정에서 구조체와 함수는 데이터베이스에서 구조체와 함수 파일을 찾게되고, 발견하면 각각의 파일 정보를 이용하여,