• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.49-53
• /
• 1991

최근 단위 시간당 생산성 향상을 위한 기계적 시스템의 작업속도가 계속적으로 증가되고 있으며, 그에 따라 관성력과 모터의 회전 토오크를 줄이기 위하여 시스템을 구성하고 있는 요소들의 구조 경량화 작업이 필요하게 되었다. 따라서 종래의 해석이론을 벗어난 메카니즘의 동탄성해석에 대한 중요성이 대두되었고, 이는 특히 기계의 작동속도에 대한 공진현상 및 위치 정확도와 밀접한 관계가 있기 때문에 품질향상면에 있어서 매우 중요하게 인식되고 있다.(중략)

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.195-202
• /
• 1997

The charateristics of stabilization for stabilized truss unit-structures with cable and truss are investigated in this paper. This unit system is composed of a central post and eight cables, and is connected by hinge joints, and stabilized by self-equilibrated stress field. As this unit structure itself is a statically closed and stabilized system individually, it can be employed to assemble structures with various configurations. In this study, for stabilization of truss structures stabilized by cable tension, the structural concept of unit structures, the range of various geometrical parameters and the relationship of governing parameters about unit systems are explained.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.74-78
• /
• 2001

In this study, out-of-plane properties and CTEs were predicted for 8-harness satin weave textile composites. The properties were calculated by unit cell analysis for configurations with varied waviness ratio and phase shifts. Macro elements were employed to reduce the computer resource requirement. It was found that the out-of-plane properties and CTEs were varied as the phase shift changed. However the dependency was much weaker than the in-plane properties.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.549-556
• /
• 2002

주변이 Kinney의 정의에 따른 부분 고정도를 가지고 지지된 직4각형 평판이 부분 분포하중을 받고 있을 때의 안정해석을 유한 요소법으로 수행하였다. 수치해석에서 고려한 변수는 평판의 변장비 (=λ)와 부분 분포하중 작용폭 (=γ) 및 부분 고정도 (=f) 값이다. 여기서 특히 f=0.0 은 주변이 단순지지를 표시하고 f=1.0은 고정지지를 뜻하는데 수치해석에서는 f=0.0, 0.2, …, 1.0으로 변화시켰다. 유한 요소법으로 산정한 판의 좌굴계수 변화는 각각의 변장비에 대하여 나머지 두 개의 매개변수를 변랑으로 하는 대수 함수식으로 표시하였다. 제안한 대수식으로 추정한 임계하중치와 유한 요소법으로 산정한 임계하중치 간의 상관계수는 모든 변장비에 대하여 거의 단위치 (ρ=1.0)에 가까웁다. 따라서 제안한 대수 함수식은 구조 설계자들의 판 설계 및 안정 검토시에 유익한 자료로 이용될 수 있다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.245-256
• /
• 2000

A moment-curvature relationship to simulate the behavior of reinforced concrete beam under cyclic loading is introduced. Unlike previous moment-curvature models and the layered section approach, the proposed model takes into consideration the bond-slip effect by using monotonic moment-curvature relationship constructed on the basis of the bond-slip relation and corresponding equilibrium equation at each nodal point. In addition, the use of curved unloading and reloading branches inferred from the stress-strain relation of steel gives more exact numerical result. The advantages of the proposed model, comparing to layered section approach, may be on the reduction in calculation time and memory space in case of its application to large structures. The modification of the moment-curvature relation to reflect the fixed-end rotation and pinching effect is also introduced. Finally, correlation studies between analytical results and experimental studies are conducted to establish the validity of the proposed model.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.1
• /
• pp.41-46
• /
• 2003

본 논문은 공간구조의 기본 요소인 피라미드형 구조단위에 대한 해석과 포스트텐션 시험의 결과를 기술하였다. 시험과정 중에 관찰된 거동 특성을 분석하고 수치해석의 결과와 비교 검토하였으며 시험모델에 대한 미케니즘(Mechanism)을 기하학적 해법으로 확인하였다. 이 논문의 결과는 다 방향성을 가진 조인트 시스템(Mero Joint System)을 이용한 공간구조의 거동을 정확하게 예측할 수 있고 비교적 작은 포스트텐션력으로 공간구조의 형성과 시공이 가능함을 제안하고 있으며 공간구조가 미케니즘을 포함할 경우 큰 변형이 일어나므로 비선형 거동을 고려해야 함을 나타내고 있다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.154-157
• /
• 1994

보는 토목, 건축, 기계, 선박, 항공 등 구조공학 분야에서 가장 기본이 되는 구조단위이므로 그에 대한 동적해석 특히 자유진동에 관한 많은 연구들이 발표되고 있다. 이제까지 이러한 연구들은 사항중으로 인한 정적 초기처짐의 영향을 고려하지 않은 논문들이다. 최근 재료과학의 발달로 고강도의 재료가 출현하고 따라서 세장비가 매우 큰 구조물의 시공이 가능하게 되어 정적 처짐이 다소 큰 구조물에서도 정적 안전성을 확보할 수 있게 되었다. 그러나 이러한 경우에 정적 초기처짐은 구조물의 동적거동에 영향을 줄 것으로 생각된다. 본 연구는 문헌[7]에서 유도된 편미분방정식을 이용하여 사하중에 의한 정적 초기처짐을 갖는 보의 자유진동을 지배하는 상미분방정식을 유도하고 이를 수치해석하여 고유진동수와 진동형을 산출하는데 연구목적이 있다.

• Composites Research
• /
• v.30 no.6
• /
• pp.331-337
• /
• 2017

The composite lattice structures have advantages of high specific stiffness and strength and are mainly applied to the structures of launch vehicles that carry the compressive load. However, since these structures are manufactured by filament winding technology, there are some defects and voids found in the knots. For these reasons, the stiffness and strength of the lattice structures have to be compared with finite element model for predicting design load. But, the full scale test is difficult because time and space are limited and the shape of structure is complex, and hence the simple and reliable test methods for examination of stiffness are needed. In this paper, subelements of composite lattice structures were prepared and compressive and bending test were conducted for examination of stiffness of helical and hoop rib. Test methods for subelements of composite lattice structures that has curved and twisted shape were supposed and compared with finite element analysis results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.6
• /
• pp.595-601
• /
• 2009

A flight control system for high reliability consists of complicated redundant structures. This redundancy can improve fault tolerant characteristics of system. So, a system manager is able to choose a suitable structure using analyzed quantitative data of various redundant structures. In this paper, we analyzed redundant characteristics and reliability. We defined necessary mathematical model for analysis tool. Then we compose a reliability block diagram analysis tool applying such defined analysis model using Simulink blocks. Finally we verified the analysis tool using a commercial tool.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1361-1375
• /
• 2013

The design flow considering nonstationarity is estimated to determine the design flood related to hydraulic structure quantitatively based on the design process for stream restoration in the Mokgamcheon watershed proposed by Lee et al. (2011). The purpose of this research is to suggest new ways that the design flood was calculated considering nonstationarity at the Mokgamcheon watershed. Storm-unit hydrograph method to calculate design flood and direct frequency analysis were applied and nonstationarity was considered for the frequency analysis through extRemes toolkit developed at NCAR (National Center for Atmospheric Research). Although the method of direct flood frequency analysis due to dealing with flowrates directly has a more reliable than strom-unit hydrograph method, as a result, the method of direct flood frequency analysis underestimated the design flood than strom-unit hydrograph method due to the characteristics of the flow data. Therefore, the flood of storm-unit hydrograph method (100 years frequency) was determined as the design flood in the Mokgamcheon watershed.