• The Journal of the Acoustical Society of Korea
• /
• v.21 no.7
• /
• pp.624-631
• /
• 2002

The insertion loss of the noise barriers with several top shape is measured in an anechoic room by using a reduced scale model test. The insertion loss differences between a straight vertical barrier having 0.3 m height and several barriers with simple top shaped are compared. The results show that the latter is more effective than the former and absorptive barrier is more effective than the reflective one. Among the barrier types of 'T', 'Y', and '(equation omitted)', type 'Y' is the best one and the rest have similar effect. This result is well agree with Alfredson (PIOC. Inter-Noise 95, p. 381, 1995)'s but contradict to May (J. Sound Vb. 71, p. 73, 1980)'s. Therefore, it is difficult to determine which type is the best. In order to find out this discrepancy, boundary element method is adopted and the result shows one can have different result because each supposed different experimental conditions like height of noise barrier, positions of sound source and receiver, etc.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.4
• /
• pp.218-226
• /
• 2007

In modern naval ships, the design of submarines has continually evolved to improve survivability and it is also important to design ship against shock response. Exiting underwater ship design has been peformed due to results of static analysis considering shock acceleration by simple method. However, it can not be anticipated good assesment. The present study applied the Arbitrary Lagrangian-Eulerian (ALE) technique, a fluid-structure interaction approach, to simulate an underwater explosion and investigate the survival capability of a damaged submarine liquefied oxygen tank. The Lagrangian-Eulerian coupling algorithm and the equations of state for explosives and seawater were also reviewed. It is shown that underwater explosion analysis using the ALE technique can accurately evaluate structural damage after attack. This procedure could be applied quantitatively to real structural design.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.376-376
• /
• 2019

최근 수공시설물의 설계규모를 넘어서는 극한 강우사상이 발생하여 치수 목적의 수리구조물이 파괴되는 등 사회경제적으로 많은 홍수피해가 발생하고 있다. 전 세계적으로도 지구온난화, 엘리뇨, 라니냐 등 지구 환경변화에 따른 기상이변의 영향으로 홍수 발생강도(magnitude), 빈도(frequency), 피해규모 등의 측면에서 지속적으로 증가 추세를 보이고 있다(2011년 태국 대홍수, 2013년 태풍 하이옌). 극한홍수에 대한 명확한 개념정립이 부재한 상황으로 극한홍수 개념을 보다 체계적으로 정립하고 이를 바탕으로 아시아-태평양지역 태풍위원회 회원국의 실제 현업에서 홍수관리 및 치수정책 수립시 활용 가능한 극한홍수예보시스템을 구축하였다. 극한홍수정의를 수문학적 측면과 사회-경제적 측면을 고려한 정의, 일반적 정의로 구분하여 다음과 같이 정리하였다. (1) 기존에 자주 발생하지 않던 홍수로 홍수량적으로, 침수시간적으로 지금까지는 경험하지 못한 홍수이며, 수문학적으로 500년 빈도 홍수량을 초과하는 홍수량을 말한다. (2) 사회-경제적 측면을 고려한 설계홍수량을 초과하는 홍수량을 말한다. (3) 홍수량 및 홍수지속기간 측면에서 자주 경험하지 못했던 홍수로 치명적인 인명, 재산피해를 야기한 홍수량을 말한다. 정의된 극한홍수 대응을 위한 극한홍수예보시스템은 가장 단순한 수위법(Stage Method)부터 집중형 수문모형을 이용하는 LEVEL2, 레이더강우자료를 활용하여 홍수예보를 구축한 LEVEL3, 댐, 저수지 등의 극한상황을 가정하여 극한상황에 대한 수문학적 분석과 Emergency Action Plan (EAP) 수립까지 수행 가능한 LEVEL4 단계로 구성되었다. 본 연구는 극한홍수에 대한 보다 체계적인 개념 정립을 시도하였으며 이를 바탕으로 가용데이터와 시스템 운영 측면에서의 실무역량 등을 고려하여 단계적으로 활용 가능한 총 4단계 구성의 극한홍수예보시스템을 설계, 개발하였다.

• Nuclear Engineering and Technology
• /
• v.27 no.5
• /
• pp.721-729
• /
• 1995

The Korean optimal nuclear fuel cycle strategy from the year 2000 to 2030 is derived using linear programming. The fuel cycle cost, the cost uncertainty, and the natural uranium consumption are used as the criteria for the optimization. These objectives are compromised by fuzzy decision-making technique which maximizes the minimum degree of satisfaction among the three objectives. The options for the back-end fuel cycle are direct disposal, reprocessing, and DUPIC. The optimal fuel cycle strategy of Korea is to start reprocessing in around 2010 and increase its capacity with the maximum of 800 tHM in around 2025, and to star DUPIC processing in 2025. The cot uncertainty and the natural uranium consumption of the optimal fuel cycle strategy are reduced by 7.1％ and 6.1％, respectively, at the cost penalty of 5.4％ compared with the cost-only optimal solution.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.25-35
• /
• 2000

The superstructure of general bridge like slab bridge and slab on girder bridge is composed of elastically supported isotropic plate. The objective of this study is to develop the new analysis method for elastically supported plate with general edge beam or girder(boundaries) under arbitrary out of plane loading. The displacement solutions for the macro-element of plate and beam are obtained by solving for the unknown interactive forces and moments at the beam or nodal line locations after satisfying equilibrium equation along the nodal line. The displacement functions for macro-elements ate proposed in single Fourier series using harmonic analysis, and the equilibrium equations of nodal line are composed by using slope-deflection method. The proposed analysis method is programmed by MS-Fortran and can be applied to all types of isotropic decks with bridge-type boundaries. Numerical examples involving elastically supported plates with various aspect ratio, loading cases, and bridge-type boundary conditions are presented to demonstrate the accuracy of this program. The major advantage of this new analysis method is the development of a simple solution algorithm, leads to obtain rapidly responses of bridge deck system. This proposed method can be used in parametric study of behavior of bridge decks.

• Explosives and Blasting
• /
• v.24 no.2
• /
• pp.41-50
• /
• 2006

Excavation by explosives blasting necessarily involves noise and vibration, which is highly prone to face claims on the environmental and structural aspects from the neighbors. When the blasting carried out in the vicinity of a structure, the effect of blasting vibration on the stability of the structure should be carefully evaluated. In the conventional method of evaluation, an equation for blast vibration is obtained from test blasting which is later used to determine the amount of charge. This method, however, has limitations in use since it does not consider topography and change in ground conditions. In order to overcome the limitations, dynamic numerical analysis is recently used in continuum or discontinuous models, where the topography and the ground conditions can be exactly implemented. In the numerical analysis for tunnels and rock slopes, it is very uncommon to simulate multi-hole blasting. A single-hole blasting pressure is estimated and the equivalent overall pressure at the excavation face is used. This approach based on an ideal case usually does not consider the ground conditions. And this consequently results in errors in calculation. In this presentation of a case study, a new approach of using blast waves obtained in the test blast is proposed. The approach was carried out in order to improve the accuracy in calculating blasting pressure. The stability of a structure in the vicinity of a slope blasting was examined using the newly proposed method.

• Geotechnical Engineering
• /
• v.14 no.3
• /
• pp.95-108
• /
• 1998

Downhole testing and seismic CPT (SCPT) have been widely used to evaluate stiffness profiles of the subgrade. Advantages of downhole testing and SCPT such as low cost, easy operation and a simple seismic source have got these testings more frequently adopted in site investigation. For the automated analysis of downhole testing and SCPT, the concept of interval measurements has been practiced. In this paper. a new inversion procedure to deal tilth the interval measurements for the automated downhole testing and SCPT (including a newlydeveloped continuous SCPT) is proposed. The forward modeling in the new inversion procedure incorporates ray path theory based on Snell's law. The formulation for the inversion analysis is derived from the maximum likelihood approach, which estimates the maximum likelihood of obtaining a particular travel time from a source to a receiver. Verification of the new inversion procedure was performed with numerical simulations of SCPT using synthesized profiles. The results of the inversion analyses performed for the synthetic data show that the new inversion analysis is a valid procedure which enhances Va profiles determined by downhole testing and SCPT.

• Journal of Advanced Navigation Technology
• /
• v.24 no.2
• /
• pp.128-133
• /
• 2020

In this study, an 1-dimensional positioning method using iterative linear regression for path loss expression is proposed. In the proposed method, received signal strengths (RSS) measured in several locations and distances between the measuring locat ions obtained by dead reckoning are used to derive a linear regression for the path loss from the transmitting beacon. In the proposed method, for the distance between the transmitting beacon and a target measuring location, several tentative values are assumed. For each tentative value, a linear regression is obtained. Among the linear regression expressions, the one closest to the known reference RSS value is selected and used to derive the distance to the target location. Test results show that the proposed method is more accurate than path loss model.

• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.982-988
• /
• 2002

Current design equations for shear strength of reinforced concrete columns generally overestimate the shear strength contribution by the circular transverse reinforcement. This is due to the simplification of the discrete distribution of the reinforcement to the continuous one and the imprudent application of the classical truss model to the circular section, which is different in shear-resisting mechanism from the rectangular section. This study presents a rational model for the prediction of shear strength contribution by the circular transverse reinforcement considering the starting location of a diagonal crack, the number of transverse reinforcing bars crossing the main crack and the geometrical strength component of the transverse resistance. It was found that, for lower amount transverse reinforcement, the crack starting point and the number of crack crossing bars greatly influence the shear-resisting capacity. Proposed model leads to a reliable design equation which is derived using a linear regression method and is in good agreement with the lower bound of exact strength curve.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.363-373
• /
• 2015

The purpose of this study is to develop a nonlinear algorithm for the dynamic interaction analysis of KTX trains and bridge girders with consideration of separation and flange contact phenomena between wheel and rail. For this, three interaction models between wheel-rail are implemented and compared through numerical examples. That is, the spring model and the non-jump model are briefly explained, and a nonlinear contact model is then proposed to accurately simulate interaction forces of the train-bridge system. Dynamic interaction analysis of a simply supported girder and trains is performed and the analyzed results are presented and compared for the proposed contact model and the other model types. Particularly, flange contact phenomena in the nonlinear contact model are demonstrated under a specific condition.