• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.596-601
• /
• 2007

A simplified finite element analysis method is proposed to calculate elasto-plastic responses of general hardening materials. The method provides an effective tool to calculate structural elasto-plastic responses. Numerical examples have demonstrated that its computational efficiency is very much higher than that of the incremental elasto-plastic finite element analysis, and computational results are accurate enough to meet the need of engineering practice. Compared with the general elasto-plastic incremental finite element analysis, the proposed method can avoid the incremental iteration of nodal displacements and the constitutive equation integration at each Gauss integral point, and computational results are accurate enough to meet the need of engineering practice.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.6
• /
• pp.110-114
• /
• 1997

When applying the nonuniform sampling to noisy speech signal, the required data rate increases to be comparable to or more than that by uniform sampling such as PCM. To solve this problem, we have proposed the waveform coding method, multiband nonuniform waveform coding(MNWC), applying the nonuniform sampling to band-separated speech signal[7]. However, the speech quality is deteriorated when it is compared to the uniform sampling method, since the high band is simply modeled as a Gaussian noise with average level. In this paper, as a good method to overcome this drawback, the high band is modeled as one of 16 codewords having different center frequencies. By doing this, with maintaining high speech quality as MOS score of average 3.16, the proposed method achieves 1.5 times higher compression ratio than that of the conventional nonuniform sampling method(CNSM).

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.6
• /
• pp.99-103
• /
• 1996

Most waveform coding techniques attempt to reduce redundancy of speech signal while preserving the shape of the waveform. In speech synthesis, wavefrom coding methods are used to the synthesis by rule for high quality speech. However, it is difficult to apply the waveform coding to the synthesis by rule because the parameters of the wavefrom coding cannot be classified as either the excitation or the vocal tract parameters. The proposed method shows little spectrum distortion of 2.7% or less for 50% pitch changes. It also achieves smooth connection of wavefrom magnitudes among the frames by compensating the phase in time domain.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.4
• /
• pp.89-95
• /
• 1995

The waveform coding technique has concerned with simply preserving the waveform shape of speech signal through a redundancy reduction process. In the case of speech synthesis, the waveform coding with high sound quality is mainly used to the synthesis by analysis. However, since the parameters of this coding are not classified into either excitation or vocal tract parameters, it is difficult to applying the waveform coding to the synthesis by rule. In order to apply the waveform coding to the synthesis by rule, the pitch alteration technique is required in prosody control. In this paper, we propose a new pitch alteration method that can change the pitch period in waveform coding by scaling the time-axis and compensating the spectrum. This is relevant to the time-frequency domain method were the phase components of the waveform is preserved with a little spectrum distortion of 2.5 % and less for 50% pitch change.

• Composites Research
• /
• v.33 no.2
• /
• pp.81-89
• /
• 2020

In this review paper, we introduce recent research studied effective physical properties of the reinforced composite using mean-field homogenization. We address homogenization for effective stiffness and expand it to effective thermal/electrical conductivity and dielectric constant. Multiphysics problems like piezoelectricity and thermoelectricity are considered by simplifying the constitutive equation into the linear equations like Hooke's law. We present a generalized theoretical formula for predicting effective physical properties of composite and validation by against finite element analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1243-1248
• /
• 2011

Internal defects are a major concern in the casting process because they have a significant influence on the strength and fatigue life of casting products. In general, they cause stress concentration and can be a starting point of cracks. Therefore, it is important to understand the effects of internal defects on mechanical properties such as fatigue life. In this study, fatigue experiments on tensile specimens with internal defects were performed. The internal defects in the casting product were scanned by an industrial CT scanner, and its shape was simplified by ellipsoidal primitives for the structural and fatigue analysis. The analysis results were compared with experimental results for casting products with internal defects. It was demonstrated that it is possible to consider internal defects of casting products in stress and fatigue analysis. The proposed method provides a tool for the prediction of the fatigue life of casting products and the investigation of the effects of internal defects on mechanical performance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1599-1604
• /
• 2012

In general, internal defects, such as shrinkage in casting, cause stress concentration and can be a starting point for cracks. Therefore, it is important to understand the effects of internal defects on the mechanical properties including the impact behavior. This study aim is to evaluate the effects of internal casting defects on the impact performance of Al-alloy castings. Both an experimental method and computational analysis were used to achieve the research objective. The internal defects in the casting were scanned using an industrial CT scanner, and their shape was simplified using ellipsoidal primitives for impact analysis. The good agreement between the experimental and computer simulation results verified the reliability of the proposed computational method for the FEA of casting components with internal defects.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.1
• /
• pp.65-94
• /
• 2015

Since American Airlines launched AAdvantage which was the first Frequent Flyer Program in 1981, many people has accumulated mileage credits, and now, frequent flyer program(FFP) is the universal marketing tool to the airlines. These days, airlines establish a strategic alliance with domestic and foreign companies of various fields ; other airlines, travel agencies, car hire firms, hotels, department stores, even credit card companies. However, more people want to use their mileage credits, more airlines reject to approve that or change frequent flyer program against their customers. Last year, Northwest, Inc. v. Ginsberg, the United State Supreme Court made a decision that the preemption provision of Airlines Deregulation Act(ADA) preempts state laws related to rates, routes and services for air carriers including implied covenant of good faith and fare dealing. Thus, the claim of Ginsberg was canceled, it means that Northwest Inc. could terminated one-sidedly his membership in the frequent flyer program. In the contrast, Korea does not have the statute like ADA. If customers file a claim on FFP like Ginsberg, the courts of Korea judge whether the clauses of standard form contract are unfair or not. Therefore, in this article, Ginsberg would be checked on legal issues and be compared briefly with the courts' ruling in Korea.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.3
• /
• pp.211-215
• /
• 2000

Lipid extraction preceding fatty acid methyl esters preparation for gas-liquid chromatography is time-consuming and cumbersome. We performed one-step extraction/methylation method with a mixture of methanol-heptane-benzene-DMP-H$_2$SO$_4$ without prior fat extraction. The simultaneous digestion and lipid transmethylation takes place at 8$0^{\circ}C$ in a single phase. After cooling till room temperature, two phases are formed. The upper one of the phases contains the fatty acid methyl esters ready for GLC. The fatty acid composition of major industrial crops obtained by the one step extraction/methylation method (method 1 and 2) was almost identical with the fatty acid composition of the pure fats extracted with hexane by the Soxtec instrument (method 3). Due to its simplicity, speed, and reduced organic solvent the one-step extraction/methylation method (method 1 and 2) should be useful to determine overall fatty acid composition, especially in situations where many samples have to be analyzed.

• Journal of the Korean Society for information Management
• /
• v.20 no.4 s.50
• /
• pp.135-158
• /
• 2003

The Purpose of this study is to investigate how information use contributes to learning. Conducted as part of a larger study, this study focuses on learning by analyzing students' use of cognitive skills during the Process of using information. Within the broad methodological framework of qualitative research in constructivist paradigm (Guba and Lincoln, 1998), the study applied the revised Bloom's taxonomy (Anderson and Krathwohl, 2000) as a particular framework to understand the Phenomenon. Participants included 21 high school juniors in an honors' class of persuasive speech. The study's combinational use of two techniques -concept mapping and individual interview - in a naturalistic setting Proved to be the unique methods for researching the reflection of information use in learning Products. The results revealed that changes in students' understanding occured in four types - simple, analytic, organizational, and holistic changes. The analysis using the revised Bloom's taxonomy showed that a variety of cognitive skills were used during the whole process of information use and that the use of higher levels of cognitive skills is particularly crucial.