• The Journal of the Korean bone and joint tumor society
• /
• v.17 no.2
• /
• pp.58-64
• /
• 2011

Purpose: The purpose of this study is to observe unicameral bone cyst (UBC) outcome after the fracture has healed and if there is any identifiable prognostic factors. Materials and Methods: 13 UBC patients with pathologic fracture from 2001 to 2010 were reviewed. The mean follow up were 26 months (3-90 months). There were 11 male and 2 female patients and the mean age of the patients were 10.2 years old (6-16 years). 9 involved proximal humerusand 2 involved humerus shaft and 1 involved proximal femur and 1 involved proximal tibia. The treatment of UBC fracture was conservative cast application to heal the fracture initially, and 1 patient was treated with primary auto bone graft and open reduction with internal fixation. 5 patients were treated with steroid injection during follow up period and 2 patients with auto bone graft. We analyzed the change of UBC during pathologic fracture healing period and prognostic factor about age, the size of UBC, the involvement of physis. Results: The mean duration of the fracture healing was 8.2 months. Complete healing were occurred at 4 patients (31%). No statiscal difference was checked with age about UBC healing (p=0.42). But, more larger size about UBC and more closer to physis, the healing was difficult (p=0.05, p=0.03). Conclusion: While pathologic fracture of UBC was possibly healed, active treatment should be applied especially those cysts that involvescloser area of the physis or large size.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.10
• /
• pp.759-767
• /
• 2006

The level-of-detail (LoD), which is a method of reducing polygons on mesh, is one of the most fundamental techniques in real-time rendering. In this paper, we propose a novel level-of-detail technique applied to the virtual character's motion (Motion LoD). The movement of a virtual character can be defined as the transformation of each joint and it's relation to the mesh. The basic idea of the proposed 'Motion LoD' method is to reduce number of joints in an articulated figure and minimize the error between original and simplified motion. For the motion optimization, we propose an error estimation method and a linear system reconstructed from this error estimation for a fast optimization. The proposed motion simplification method is effectively useful for motion editing and real-time crowd animation.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.8
• /
• pp.45-54
• /
• 2014

In this paper, we proposed an effective quality improvement scheme of magnified image using the surface characteristics in image. If the surface in image is estimated as simple convex surface or simple concave surface, the interpolated value can be calculated to have the surface characteristics by using the other method in the proposed scheme. The calculated value becomes the interpolated pixel value inmagnified image. So, themagnified image reflects the surface characteristics of the real image. If the surface is not estimated as simple convex surface or simple concave surface, the interpolated value is calculated more accurately than bilinear interpolation by using the method of the proposed scheme. The PSNR values of the magnified images using the proposed schemes are greater than those of the magnified images using the previous interpolation schemes.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.11
• /
• pp.59-68
• /
• 2013

In this paper, an effective scheme was proposed to estimate simple convex surface and simple concave surface which exist in image. This scheme is applied to input image to estimate simple convex surface or simple concave surface. When simple convex surface or simple concave surface exists, another proposed efficient interpolation scheme is used for the interpolated pixel to have the characteristics of simple convex surface or simple concave surface. The magnified image using the proposed schemes is more similar to the real image than the magnified image using the previous schemes. The PSNR values of the magnified images using the proposed schemes are greater than those of the magnified images using the previous interpolation schemes.

• Journal of the Korea Computer Graphics Society
• /
• v.25 no.3
• /
• pp.75-83
• /
• 2019

In this paper we present a new technique for simultaneously simplifying N triangule meshes with the same number of vertices and the same connectivities. Applying the existing simplification technique to each of the N triangule mesh creates a simplified mesh with the same number of vertices but different connectivities. These limits make it difficult to construct a simplified blend-shape model in a high-resolution blend-shape model. The technique presented in this paper takes into account the N meshes simultaneously and performs simplification by selecting an edge with minimal removal cost. Thus, the N simplified meshes generated as a result of the simplification retain the same number of vertices and the same connectivities. The efficiency and effectiveness of the proposed technique is demonstrated by applying simultaneous simplification technique to multiple triangle meshes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.308-308
• /
• 2010

본 논문에서는 판토그라프의 공력소음 발생 특성을 규명하기 위하여 단순 모델을 이용하여 그 특성을 분석하였다. 단순 모델은 실제 팬헤드의 사이즈를 고려하여 선정하였고, 이를 통해 음압 해석 알고리즘을 구축하고 소음 발생 메커니즘을 분석하였다. 단순 모델을 선정하여 이를 Lattice Boltzmann Method 를 기반으로 한 전산 유체 해석을 통한 결과를 이용하여 음압 레벨과 음압의 방사형태를 계산하고, 풍동 실험을 통해 이를 검증한다. 풍동 실험에서는 단순 모델을 제작하여 100 km/h 의 속도 환경에서 항력, 양력과 소음을 측정하였다. 단면의 형상에 따른 변화 추이를 검토하였으며 해석결과를 단일 수치로도 정량화하여 제시한다. 최종적으로 정립된 알고리즘을 기반으로 팬헤드의 3 차원 모델을 시뮬레이션 한 결과를 제시한다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.297-298
• /
• 2010

산업용 인버터 시장은 부하의 운전 조건에 따라 고성능, 다기능, 단순 기능 분야로 구분된다. 당사는 고성능, 다기능 분야에 대응이 가능한 N700V 모델을 개발하여 영업 활동을 하고 있으나, 단순기능 분야에는 기능의 복잡성과 높은 가격 등으로 경쟁력이 저하되었다. 이에 당사는 단순기능 분야에 대응이 가능하도록 기능은 단순하고 가격경쟁력이 있는 맞춤형 인버터를 새로이 개발하게 되었다. 본 논문에서는 당사가 산업용 인버터 제품의 이원화를 위해 새로이 개발된 단순 기능형 인버터 N700E(5..5kW ~ 350kW) 시리즈에 대한 주요기능 및 성능에 대해 소개하고자 한다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.285-288
• /
• 2010

유체저장탱크가 외부로부터 지진과 같은 동적하중을 받게 될 경우 유체와 구조물의 상호작용(Fluid-Structure Interaction)으로 인하여 일반적인 구조물과는 상이한 거동을 보이게 된다. 이러한 복잡한 상호작용을 고려하여 현재 내진 설계에서는 Housner와 Haroun의 이론을 적용한 단순화 모델들이 사용되고 있다. 이들 모델은 유체의 거동을 대류(convective) 성분과 충격(impulsive) 성분으로 구분하여 집중질량으로 단순화 한다. 하지만 점차 대형화되고 있는 유체저장탱크의 정확한 동적 거동 특성을 파악하고, 지진하중과 같은 방향성을 가진 하중에 대한 구조물의 정확한 응답을 해석하려면 단순화 모델의 적용성 검토가 필요하다. 본 연구에서는 지진하중을 받는 유체저장탱크의 동적거동을 집중질량 모델과 3차원 모델을 이용하여 해석하였다. 나아가 해석결과의 차이를 분석하여 단순화 모델의 정확도 향상을 위한 내진설계변수 산출에 관하여 향후 연구방향을 제시하였다.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.52-63
• /
• 2009

The problem of scheduling simply periodic task systems upon a uniform multiprocessor is considered. Partitioning of periodic task systems requires solving the bin-packing problem, which is known to be intractable (NP-hard in the strong sense). This paper presents a global scheduling algorithm which transforms a given simply periodic task system into another using a "task-splitting" technique. Each transformed simply periodic task system is guaranteed to be successfully scheduled upon any uniform multiprocessor using a partitioned scheduling algorithm. It is proven that the proposed algorithm achieves the theoretical maximum utilization bound upon any uniform multiprocessor platform.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.1
• /
• pp.63-71
• /
• 2004

This research is to reconstruction of railway alignment using GPS data, an investigation is made on the method of optimum simplification for reduction of unnecessary linear data, improve the accuracy by using four simplification algorithms among the methods. By applying two measured of displacement between observed data and it's simplification methods have been evaluated. The results showed that the complexities of lines is not practical to investigate simplification algorithms, the Douglas-Peucker method produced a little displacement between observed data and it's simplification. Its by using the Douglas-Peucker method to observed linear GPS data in railway track, design elements of horizontal alignment have been calculated. Then we could know that obtain the good results fur reconstruction of alignment elements through the methods and algorithns of this study.