• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.240-245
• /
• 2000

This paper presents the experimental study of drilling for duralumin A2024 with intermittently decelerated feed rate. It is achieved through a programmed periodic increase and decrease in the feed rate using a machining center. The following experimental result were performed with the objective of solving chip to disposal problems. In conventional drilling of aluminum, long continuous chips are produced that wind around the drill causing difficulties in eliminating chips from the cutting zone. In order to acquire the basic data necessary to regulate the chip profile, the relationship between cutting variables and chip shape was investigated. The following conclusions are established from the experimental results. At a suitable feed fluctuation ratio, intermittently decelerated feed drilling proved successful in breaking chips to appropriate lengths while maintaining stable cutting. Thus, it is an effective method for improving chip disposal. The amplitude of the dynamic component of cutting force in intermittent feed frilling is influenced by the feed fluctuation ratio.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.3
• /
• pp.173-181
• /
• 1993

An improved two-dimensional Eulerian-Lagrangian convection-dispersion model was established after comparing several models. To simulate long term release of discontinuous suspended solid source from coastal dike construction, source was represented by Fourier transformation. It was concluded that this model can effectively simulate long term coastal dispersion problems.

• The Journal of the Korea Contents Association
• /
• v.22 no.10
• /
• pp.554-562
• /
• 2022

Humans technological advancements have resulted in the depletion of whale resources. Accordingly, the International Whaling Commission was established to preserve whale resources and ensure the orderly development of the whaling industry. After a commercial whaling moratorium came into effect, the international trade of whale meat and related products was banned. However, There is a systematic activity through illegal remodeling ships because whales incidentally caught may be distributed in Korea and have a significant economic benefit. Although suspected illegal whaling is actively cracked down, but it is still insufficient to prevent illegal whaling and distribution. To prevent this, stereoscopic crackdowns utilizing air forces and patrol ships are effective, and it is necessary to quickly separate the captured ship and crew to prevent the destruction of evidence. For the transparent distribution of whale meat, it is necessary to advance related technologies such as whale species identification and individual identification of forensic science institutions based on whale DNA database of the National Institute of Fisheries Science. Accordingly, the Korea Coast Guard Research Center is directly conducting research on related national R&D project. To increase the efficiency of identifying whale-related evidence at crime scene, a rapid test kit that responds specifically to whale bloodstrains is developing and evidence transport packs are manufacturing and distributing, while identification technologies are also being advanced.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.464-464
• /
• 2017

경사가 급한 산지하천은 대부분 전석이 산재한 자갈하상으로 되어 있다. 전석은 계곡이나 사면에서 발생한 토석류의 일부로 하천에 유입하여 하류로 이송되는 중에 하상에 퇴적된다. 이후 발생하는 홍수에 따라서 거대 전석은 단속적 이동하기 때문에 하천 흐름을 방해하는 돌출장애물로서 기능하는 경우가 많다. 본 연구에서는 개수로 흐름의 장애를 유발하는 돌출물이 경계층 높이에 어떤 영향을 미치는 지를 파악하기 위하여 장애물 돌출높이의 변화가 경계층고에 미치는 영향을 수리실험으로 조사하였다. 본 연구인 경계층분포 실험은 폭 0.6m, 길이 9m인 순환식 유량공급 개수로에서 진행하였으며 실제 경계층 측정 길이는 폭 0.6m, 최대 길이 1.2m, 수심 0.2m이다. 개수로에 돌출장애물을 부착 후 3차원 유속계를 이용하여 유속을 측정하였다. 유속계의 측정간격은 수로 방향, 폭 방향, 수심방향으로 각각 1cm씩 이동하며 유속 u, v, w를 측정하였으며 이때 흐름의 평균유속은 0.51m/s이다. 실험에 사용된 돌출 장애물의 크기는 가로와 세로는 6cm, 길이 6~10cm인 직육면체 콘크리트이다. 포설된 하상재료의 평균입경은 20.5mm의 강자갈이며 포설된 높이는 평균 20.5mm이다. 실험방법은 개수로 바닥에 돌출장애물을 부착 후 그 하류에서 수심, 유량, 유속, 수온을 측정한다. 또한 하상재료를 포설하고 위와 같은 방법으로 실험을 진행 후 결과를 비교, 분석한다. 본 연구는 결과를 정리하면, 동일한 높이의 돌출장애물이 있을 경우 개수로 유속분포는 자갈하상에서 기울기가 더 급하였다. 돌출 장애물에서 하류로 갈수록 무차원 경계층 두께는 감소하는 경향을 보였으나 자갈하상인 경우에는 진동을 나타내고 있어서 하상의 조도가 경계층 안정에 영향을 미치는 것으로 판단된다. 따라서 자갈하상과 같이 하상의 조도고가 클 때 경계층 변화에 미치는 기구를 파악하는 연구가 필요하다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1035-1042
• /
• 1988

The acoustic emission(AE) signal is monitored in milling operation in order to investigate the relationship between the progressive tool wear and the AE signals. A signal processing technique so called time domain averaging(TDA) is presented for the elimination of the influences of the noise imbedded in the periodic signals. The relationship between the progressive tool wear and the AE signals is investigated by varying the cutting speed, feed, depth of cut and the number of insert. From the measured data, it is observed that the averaged level of the AE signal increases at first with the increase of flank wear to a certain critical value, and then stays almost constant or fluctuates with further increase of the flank wear.