• Korean Journal of Optics and Photonics
• /
• v.3 no.3
• /
• pp.155-160
• /
• 1992

1)iscussed in this paper are the effects of phase modulation on the line spread functions (LSF) and MTFs of ;I binocular objective system. The binocular objective lens is made in Korea. It has rotationally symmetric aberrations. The LSFs and MTFs are measured experimentally. The phase modulation is carried out by applying phase retardation n on the aperture. The area where the phase is not retarded presents a double annular type. The OTF curves of phase modulated aperture are compared with that of unmodulated aperture. The comparison shows that there is the aberration compensation effect in aberration loaded system. Therefore the performance of many optical system can be improved without any loss of light energy by properly modulating the phase on the aperture.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.86-86
• /
• 1994

박막 EL소자의 투명전극으로 제작된 ITO막의 전기적, 광학적 특성을 조사하였다. Plama CVD방법으로 제작된 ITO막은 증착시 산소결핍으로 인한 비 다량결합(non-stochiometry) 에 의해 In이 석출되어 흑화현상이 일어나 전기전도도와 광투과율을 향상을 위해 산소분위기에서 30$0^{\circ}C$로 4분간 열처리를 행하였다. 한편 ITO막의 비저항 $\rho$와 광투과율 T를 Van der pauw법과 단색 분광계로 각각 측정하였다. 그 결과 상온에서 10-15$\Omega$/$\square$의 면저항과 400-1000nm의 파장영역에서 85-95%의 광투과율을 가져 박막 EL소자의 투명전극 조건을 만족하였다. 열처리에 대학 ITO막의 구조적 특성을 알아보기 위해 X-선회절장치(JEOL.JDX-8030)로 조사하였다. Fig.1은 X-선 회절 패턴을 나타낸다. 열처리후 ITO막은 상대적으로 최대 강도(peak intensity) 가 증가함으로써 열처리에 의해 결정성 향상이되었음을 알수 있다. Fig.2는 파장에 따른 ITO막의 광투과도를 나타낸다.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.180-185
• /
• 2012

The objective of this study was carried out to elucidate the effect of LEDs (light emitting diodes) irradiation in relation to early growth and inorganic elements in leaf lettuce (Lactuca sativa L. 'Rollo Rosa'). In morphological changes of leaves, shoot elongation and hypocotyl length showed poor growth in red light irradiation, while the red + blue light irradiation induced shorter plant height and much greater leaf numbers resulting in increased fresh weight. In change of the Hunter's color and SPAD values, lettuce seedlings grown under in red + blue and fluorescent light irradiation had a higher $a^*$ value, otherwise SPAD values were not changed in these light irradiations. Interestingly, relative chlorophyll contents showed 1.8 times increased redness in the treatment of red + blue light irradiation. Inorganic element (N, Ca, Mg, Mn, and Fe) and ascorbic acid contents were increased in lettuce plants grown under LEDs light irradiation compared to those of lettuce grown under the fluorescent light which showed higher P and Mn contents. In conclusion, it is considered that red + blue light irradiation which stimulates growth and higher nutrient uptake in leaf lettuce could be employed in containers equipped with LEDs.

• Journal of Life Science
• /
• v.24 no.2
• /
• pp.148-153
• /
• 2014

The objective of this study was to elucidate the effect of light-emitting diode treatment on early growth and inorganic elements in leaf lettuce (Lactuca sativa L. 'Oak Leaf'). In changes to leaf morphology, shoot elongation and hypocotyl length showed poor growth under red light irradiation, while red+blue light irradiation induced shorter plant height and more leaves, resulting in increased fresh weight. With respect to Hunter's color and SPAD values, lettuce seedlings grown under red+ blue and fluorescent light irradiation had a higher $a^*$ value but showed no other changes to SPAD values. Interestingly, redness in relative chlorophyll content was 1.4 times higher under red+blue light irradiation. Inorganic element (N, Ca, Mg, and Fe) and ascorbic acid concentrations increased in lettuce plants grown under LED light irradiation compared to those of lettuce grown under fluorescent light, which showed a higher P content. In conclusion, red+blue light irradiation, which stimulates growth and higher nutrient uptake in leaf lettuce, could be employed in containers equipped with LEDs.

• Korean Journal of Weed Science
• /
• v.8 no.1
• /
• pp.15-22
• /
• 1988

In this experiment, interactions between light and other factors such as chilling, alternating temperature, moisture, content, oxygen, and seed coat which affect germination of Oenothera lamarckiana Ser. seed were investigated to study the physiological effects of light on the germination. Light induced the initial stage of seed germination before radical protrusion by affecting embryo rather than seed coat even under anaerobic condition or low water potential (-18 bars). This light effect on germinability of seed was suppressed by blue light irradiation and the effect was increased with increment of blue light intensity and irradiation time. However, the blue light effect was reversible. Chilling, alternating temperature, softening of seed coat and light showed promotive interaction in the induction of seed germination. Irradiation of filtered light (monochrome), however, reduced chilling effect on germination. Hydrogen-ion concentration and gibberellic acid treatment had no effect on light or dark germination.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.4
• /
• pp.263-267
• /
• 2013

In this research, a novel optical measuring methodology for the measurement of oil thickness in seawater is suggested by evaluating the light absorption which is occurred in the process of penetrating through oil layer on seawater. Laser having monochromatic wave is used as a light source and photodiode which can convert the intensity of the light into an electrical signal is applied to measure the intensity of the penetrating light through the oil-water mixtures. In the experiment, bunker C and lubricating oil are used, and three different lasers having different wavelengths are applied and compared for the selection of an optimal light source. As a result, it is observed that in the case of blue laser, the intensity of the light on the optical sensor decreases with an increase in the oil thickness. Through this relation, both the presence of oil and the thickness of oil can be determined.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1999.11a
• /
• pp.79-82
• /
• 1999

광환경은 식물의 생체중, 건물중, 초장, 엽면적 등과 관계되는 광합성 작용과 화아형성, 발근, 종자발아, 잎의 전개 등과 관계 있는 광형태형성에 커다란 영향을 미친다. 식물생산 시설에 사용되는 형광등, 고압나트륨등, 메탈할라이드등, 백열등과 같은 인공광원에는 다양한 파장 영역들이 포함되어 있으므로 특정 파장의 선택적인 조사가 불가능하다. 최근 들어 식물의 생장 및 광형태형성 제어를 목적으로 소형의 단색광원인 발광다이오우드(light-emitting diode, 이하 "LED"로 표시함)에 대한 관심이 증대되고 있다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.200-201
• /
• 2001

헬멧 장착형 HMD(Head-Mounted Display) 시스템은 비행기 조종사나 저격수의 시선을 크게 움직이지 않고 군사 전술상의 현재 상태를 볼 수 있도록 하여 눈의 피로감을 줄이고 시선의 이동에 의한 돌발적인 사고의 위험을 감소시킬 수 있어 군사적으로 유용한 장치이다 HOE(Holographic Optical Element)의 중요한 응용 분야 중 하나로 HMD에서의 결상 렌즈 또는 광 결합기가 있다 HMD 시스템에서 HOE의 역할은 2차원의 단색 디스플레이 영상을 헬멧 착용자의 눈에 반사하여 결상시키는 것이다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.411-417
• /
• 1994

The electro-optic polarization transmission characteristics of a liquid crystal (LC) cell is represented by a rotational transformation on the Poincare sphere, and its characteristic parameters, the angle and the axis of the rotation, are experimentally determined with respect to the voltage applied to the LC cell. From the experimental data obtained, we determine driving voltage for the LC cell to give the rotation angle near $180^{\circ}$ of the rotation for the change of the state of the LC cell from non-select to select state, which is a necessary condition for the realization of maximally bright images. The directions of the transmission axes of the polarizer and the analyzer which form a liquid crystal display panel together with the LC cell, are determined from the general characteristics of the rotaional transformation of the LC cell. cell.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.81-84
• /
• 2004

본 논문은 스크린 프린트 방식을 이용하여 두께 $18{\mu}m$의 ZnS:(Cu,Al) 필름을 제조하여 미세구조와 결정성을 분석하고 형광체로써의 특성을 평가하였다. 영상획득에는 포항 가속기 연구소의 싱크로트론을 이용하였으며 CMOS 영상 센서를 사용하여 DR의 간접방식을 구현하였다. 특성 평가를 위해 SEM 측정, 발광 강도 측정을 하였고, 단색광(Beam size $5mm{\times}2mm$)을 사용하여 test phantom 영상과 물고기 영상을 획득하였다. 획득한 영상의 평가를 위해서 test phantom 영상의 MTF 측정을 하였다 제조된 ZnS:(Cu,Al) 필름의 표면은 육방정계 구조를 가졌으며, 5lp/mm는 73.8%, 10lp/mm는 38.9%, 15lp/mm는 15.4%, 20lp/mm는 12.2%의 MTF를 가졌다. 물고기 영상을 통하여 ZnS:(Cu,Al) 필름을 이용한 고해상도 미세구조영상 획득의 가능성을 확인하였다.