• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.351-356
• /
• 2005

출구부 수심을 결정하는 것은 개수로 흐름을 해석하는 데 매우 중요하면서도 쉽지 않은 일이다. 출구부 수심을 결정하기 위해서는 무엇보다도 정확한 관측이 선행되어야 한다. 그러나 종종 그 형상이 복잡하고 부정확한 관측결과를 가져오는 경우도 있다. 이 때문에 본연구진은 보다 더 효과적으로 마찰계수와 출구부 수심을 결정하는 방법을 제안하고자 한다. 출구부 수심은 그 흐름 특성에 따라 상류일 경우에는 임계수심, 사류일 경우에는 등류수심과 거의 일치하며 이를 통해 출구부 수심을 양해적으로 산정하는 방법을 제안한다. 이 양해식은 관측된 '정류수심'자료를 통해 개발 및 검증되었으며, 여기서 정류수심은 하수관의 출구부에서부터 대략 관경의 0.7배 정도 떨어진 지점을 중심으로 형성되는 수심을 가리킨다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.5
• /
• pp.331-339
• /
• 2020

In this study, ways to reduce the edge pressure at the bottom plate of the caisson breakwater were considered. The water depth, freeboard, design wave height and period, and the location of the center of gravity on the super-structure of the breakwater were selected as key design variables that influence the edge pressure, and analyzed how the edge pressure changes according to the change of this key variables. The pressure distribution formulae suggested in the design standard was applied for the calculation of design wave forces. Based on the wave forces, the required effective self-weight of the super-structure and the minimum width of the caisson were determined to have a safety factor of 1.2 against sliding and overturning. From the results, it was found that the edge pressure rapidly increased as the water depth increased, and could exceed the allowable bearing capacity when it reached a certain water depth which is 20 m within the analysis conditions. It was also confirmed that the edge pressure gradually increased linearly as the freeboard increased, but decreased with the increase of the wave height and period. This edge pressure could be significantly reduced up to more than 20% by moving the center of gravity of the super-structure to the seaside, which is 5% of the caisson width. Based on the analysis results and the recently conducted research results, a method was proposed to reduce the edge pressure that can be used in the design.