Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
2003.10a
/
pp.986-989
/
2003
In the steel production line, the molten metal of a furnace is transformed into slab material and then move to the hot strip line, This paper describe about the real time recognition system of material management number, which is marked at the surface of a slab in the steel production line. This recognition processing should be performed before the slab is moved to the hot strip line. This system include following recognition steps. First, we remove noise from the captured slab image by use pre-filter. Second, we extract rough area, which is include slab number and then, we extract individual number area. Finally, we recognize material management number by use KLT(Karhunen-Loeve transform) algorithm. We applied our system to the real slave image, which was captured in the process line. In the results, we recognized slave number to the 94% accuracy.
This paper concentrates on the development of simplified and effective algorithm for optimum reinforced concrete(RC) member design. After constructing the data base of predetermined RC sections which are arranged in the order of increasing resistant capacity, the relationship between the section identification numbers and resistant capacities of sections is estabilished by regression and it can be used to obtain the initial solution(section) which satisfies the design constraints imposed. Assuming that there exists the optimum solution. The optimization of the entire structure is accomplished through the individual mumber optimization.
Journal of the Computational Structural Engineering Institute of Korea
/
v.20
no.2
/
pp.165-179
/
2007
For the purpose of optimum design of reinforced concrete structures, pre-determined section database of column and beam are constructed and arranged in order of the resisting capacity. Then, regression equations representing the relation between section number and section resisting capacity are derived. In advance, effective optimization algorithms which search optimized solution quickly using direct search method from these database are proposed. In practice, from the fact that engineers conduct member design close to capacity optimization rather than cost optimization, both capacity and cost optimization using proposed algorithms are performed, and the review for the obtained results are followed. Moreover, the investigation for the applicability and effectiveness of the Introduced design procedure is conducted through correlation study for example structures. Because of no restriction in constructing objective functions with very simple optimization processes and fast convergence, the introduced method can effectively be used in the preliminary design stage. Especially, selected solutions from database are directly applicable in practice because these sections already satisfy all the requirements in design codes and practical restrictions.
Proceedings of the Korea Water Resources Association Conference
/
2019.05a
/
pp.258-258
/
2019
계산 격자에 기반하여 천수 흐름을 모의할 때, 그 격자에 담긴 물의 양을 정확하게 파악할 필요가 있다. 예를 들어, 초기조건으로 수위가 부여된다면 계산격자의 기하 특성에 맞추어 흐름 변수인 수심이나 흐름 단면적으로 바꾸어야하기 때문이다. 필요에 따라서는 모의 결과를 수위로 보이거나 격자 속 수심을 계산에 사용할 수도 있으므로 그 역변환도 고려되어야 한다. 2차원의 삼각형 계산격자에 대해서는 물의 부피와 수위 관계(volume/free-surface relationship)가 이미 정확(exact)하게 구명되어 있다(Hwang, 2017, J. KWRA). 그런데 1차원 문제의 횡단면에서 흐름 단면적과 수위의 관계(area/free-surface relationship)는 수위로부터 면적 환산에 대해서는 정확하나 그 역변환은 그렇지 않다. 매 시간 단계에서 갱신된 흐름 단면적으로부터 수위를 환산하기 위해 미리 작성된 면적-수위 자료를 이용한 선형 보간이 적용된다(Goodell, 2011, The RAS Solution). 이때, 환산 정확도는 자료의 해상도에 의존된다. 다행히 하천 횡단면 대부분을 채워 흐르는 홍수모의에서는 이 문제가 그리 심각하지는 않다. 심지어 수위가 복단면 저수로 턱에 걸쳐있어 흐름단면적이 급변하는 경우에도 환산 수위의 정확도는 크게 훼손되지 않는다. 그러나 미미한 환산 오차일지라도 그로 인해 수위가 저수로 턱을 넘거나 그보다 작을 수 있다. 이 경우, 홍수터의 잠김여부에 따라 수면폭(top width)이 실제 계산 결과에 비해 크게 달라질 수밖에 없다. 수면폭 오차는 그것을 이용하여 결정되는 수리 수심(hydraulic depth)이나 평균 하상고(mean bed level)의 산정에도 전파된다. 이 연구에서는 하천 횡단면에서 수위와 흐름 단면적 사이의 환산 정확도를 크게 높일 수 있는 기법을 제시하였다. 먼저 하천 횡단면에서 주어진 수위에 대해 흐름 단면적을 산정할 수 있는 알고리듬을 보였다. 또한, 횡단면에서 수위와 흐름 단면적의 관계가 단조 증가 함수(monotonically increasing function)임에 착안하여 그 역변환에 대해 해 찾기(root finding) 방법의 하나인 Brent 기법을 적용하였다. 이 기법은 주어진 구간에서 도함수가 알려져 있지 않은 경우에 대해서도 효과적으로 해를 찾을 수 있는 것으로 알려져 있다(Press et al., 2002, Numerical Recipes in C, 2nd Ed.). 내성천 하류 수계의 333개 단면에서 수면폭에 대한 상대 오차를 살펴보면, 선형 보간에 의한 기존 방법으로는 면적-수위 자료의 수가 1,000개가 되어도 그 최대치가 1% 이내에 들지 않은 반면, 이 연구에서 제시한 기법으로 면적-수위 자료 없이도 1% 이내로 줄어드는 것을 확인하였다. 다만, 반복 계산에 의한 계산 시간의 증대를 피할 수 없다. 미리 작성된 면적-수위 자료를 이용하면 계산 비용을 줄일 수 있으며, 약 35개의 구간으로 나누었을 때 비용 대비오차가 적절하였다. 이 연구는 한국건설기술연구원(주요사업 과제번호: 20190116-001)의 지원에 의한 것이다.
공주군 유구면 일대의 화강암질 편마암의 풍화작용에 따른 원소의 거동과 pH와 이차광물과의 관계를 XRF, ICP-AES, ICP-MS를 이용한 원소분석결과를 통하여 검토하였다. 이 지역의 암석은 pH6 내외의 산성환경, 침철석, 아나타제와 같은 다양한 이차광물을 생성하면서 심각한 화학조성의 변화를 초래했다. 주원소의 화학조성을 이용한 풍화지수는 토양층에서 79~88로 모암 중의 사장석이 용해되고 흑운모가 변질되어 캐올리광물의 생성이 활발한 방향으로 풍화작용이 진행되었다. 지표층으로 가면서 Al에 대한 주 원소의 거동은 Si, Ca, Na, K, P가 감소하고 Fe, Ti, Mn이 증가하는 경향을 보이며 pH가 낮은 풍화단면에서 주 원소의 변화량이 더 크다. 이 풍화대에서 Mg은 거의 일정하다. Li, As 모든 전이원소는 pH가 감소함에 따라 증가하며 특히 이들 원소는 Fe의 함량과 비례해서 증가해 침철석과 공침하였거나 표면에 흡착되어 있는 것으로 보인다. Ga은 Fe와 비례하기는 하지만 변화량은 전 풍화단면에서 일정하다. Zr, Mo, Sn, Cd은 pH에 변화에 상관없이 일정한 반면에 Rb, Sr, Ba, Y, Pb, Th, U 등은 감소하는 경향을 보인다. 특히 Rb 과 Sr은 Ca에 비례해서 감소한다. 희토류원소는 전 풍화단면에서 감소하는 경향을 보이는데 $Al_2$$O_3$에 대한 상대적인 변화량을 보면 경희토류원소는 사프롤라이트(saprolite)하부와 상부에서 부화되어 있고 중부 사프롤라이트와 토양층에서 감소하는 반면에 중희토류원소는 사프롤라이트 하부와 상부에서 감소하고 중부사프롤라이트 및 토양층에서 부화되는 경향을 보인다. 전반적으로 희토류원소의 원자번호가 클수록 손실율이 커진다. 이 풍화단면에서 원소의 거동은 각 풍화층의 pH와 생성된 이차광물의 조성에 지배를 받았다.
Journal of the Computational Structural Engineering Institute of Korea
/
v.32
no.6
/
pp.383-390
/
2019
A helideck is one of the essential structures in offshore platforms for the transportation of goods and operating personnel between land and offshore sites. As such, it should be carefully designed and installed for the safety of the offshore platform. In this study, a structural design optimization method for a lightweight offshore helideck is developed based on a genetic algorithm and an attainable design set concept. A helideck consists of several types of structural members such as plates, girders, stiffeners, trusses, and support elements, and the dimensions of these members are typically pre-defined by manufacturers. Therefore, design sets are defined by collecting the standard section data for these members from the American Institute of Steel Construction (AISC), and integer section labels are assigned as design variables in the genetic algorithm. The objective is to minimize the total weight of the offshore helideck while satisfying the maximum allowable stress criterion under various loading conditions including self-weight, wind direction, landing position, and landing condition. In addition, the unity check process is also utilized for additional verification of structural safety against buckling failure of the helideck.
Proceedings of the Korean Society of Veterinary Pathology Conference
/
2002.11a
/
pp.117-129
/
2002
가. 부검 1. 부검시 주의 사항 ◇ 시험계획서와 표준작업수순(Standard Operating Procedure)를 충분히 숙지한다. ◇ 부검소견기록지를 준비한다. ◇ 부검은 정해진 장소(부검실)에서 보호구를 착용한 후 실시한다. ◇ 부검책임자의 감독하에 실시한다. ◇ 동물번호를 반복해서 확인하고 다른 동물과의 혼동을 피한다. ◇ 외모와 내부장기 및 조직을 잘 관찰한다. ◇ 이상부위는 소견을 상세히 기록한다 (위치, 크기, 모양, 색깔, 경도, 단면 등). ◇ 소견 기술(description)은 표준용어를 사용한다. ◇ 조직의 기계적 손상, 건조, 자가융해 등의 artifact를 최소화한다. ◇ 시험물질의 성질, 투여경로, 임상관찰 결과 등 필요한 정보를 파악하고 작업한다. 2. 육안관찰의 일반적인 원칙 ◇ 독성평가는 부검의 완벽함과 정확성에 의존한다. ◇ 부검은 병리에서 자료생산의 시작단계다. ◇ 육안관찰은 조직의 선택과 삭정에 대한 기초와 방향을 제공한다. ◇ 변화는 크기에 관계없이 진단의 가능성을 최대화한다. ◇ 시험계획서에 명시된 조직 및 기타 병변을 철저히 관찰하고 채취한다. ◇ 부검시 폐기된 조직은 영원히 사라짐을 명심한다. (중략)
Proceedings of the Korean Society of Medical Physics Conference
/
2003.09a
/
pp.77-77
/
2003
CT와 MRI의 단면 영상을 대상으로 영상분할 (Image segmentation)과 Image registration방법을 이용하여 인체 모델을 개발 하고자 한다. 우선 인체의 Head와 Neck부분의 CT와 MR 영상을 얻어 뼈, 근육, 인대, 그리고 그 밖의 장기의 해부학적 영상 특징을 분석하였다. 인체의 Head와 Neck 부분에 대한 CT와 MR 영상에 대해 각 부위별로 ROI(region-of-interrest)를 설정하였고, 각 volxel 마다 3차원 좌표를 계산할 수 있는 소프트웨어를 개발하였다. 특히 각 해부학적 영상에서 부위별로 CT 번호를 분석하고, pulse sequence에 따른 MRI 영상의 부위별 특정을 분석하였다. 이 분석한 자료를 바탕으로 영상 분할을 하였다. 영상 분할전에 각종 잡음(noise) 제거 및 영상 분할을 효과적으로 처리하기 위해 기본적인 영상처리 (filtering)를 구현하였고, 대조도(contrast) 및 밝기(brightness)를 조절할 수 있게 프로그램을 구현하였다. 영상 분할 방법 중 선(line) 및 에지(edge) 의 검출 방법, 문턱치화(threshold) 방법, 영역확대(region growing) 방법으로 영상 분할을 해봄으로써 우리의 인체 모델링 개발에 가장 적합한 영상 분할 알고리듬 방법을 찾도록 시도하였다. 결과적으로 말하면, 한가지 방법의 알고리듬을 쓰는 것보다는 인체의 부위에 따라 두 가지 이상의 알고리듬 방법을 쓰는 것이 원하고자 하는 부위를 영상 분할하는데 더 효과적이다는 것을 알게 되었다. 우리의 연구 과제에서는 영역확대(region growing) 방법과 문턱치화 방법, 모드법(피크니스, 밸리)의 알고리듬을 이용하여 영상 분할을 한 결과 우리가 얻고자 하는 인체 부위별 중 근육과 뼈를 구별하는데는 별 무리가 없었으나, 인대 및 기타 장기를 구별하는데는 어려움을 겪게 되었다. 이후에 좀더 알고리듬을 연구하여 이번 연구에서 구별하기 어려운 장기 부분도 구별 할 수 있도록 노력하겠다.
Proceedings of the Korea Water Resources Association Conference
/
2019.05a
/
pp.251-251
/
2019
지난 몇 년간 내성천 하류에서 이루어진 하천 조사 덕분에 수문, 측량, 식생 등 다양한 방면의 자료가 축적될 수 있었다(Lee et al., 2019, Ecol. Resil. Infrastruct.). 그 중에서 주요 지점에서 여러 차례에 걸쳐 이루어진 수심측량 자료로부터 내성천 단면 변화, 특히 하상고 변화 경향을 가늠할 수 있을 것으로 기대된다. Lee et al. (2019)은 내성천 하류 8개 주요 지점에서 이루어진 수심측량 성과로부터 최심 하상의 변화가 활발함을 보였다. 모래 또는 자갈이 주재료인 내성천 하상은 작은 규모의 홍수에 크게 변하기도 하므로 최심 하상의 비교만으로는 하상고의 변화 경향을 파악하기가 쉽지 않다. 이 연구에서는 수심측량의 직접 성과인 최심 하상고와 더불어 평균 하상고의 산정 및 비교를 통하여 내성천 하류 주요 지점에서 하상고의 변화 경향을 살펴보았다. 이때 저수로 하상 변화가 충실하게 반영되도록 지점마다 적절한 수위가 설정되었다. 평균 하상의 변화 경향은 최심 하상의 그것과 사뭇 달랐다. 일부 지점에서 보이는 최심 하상의 저하 경향에도 불구하고 지난 6년간 평균 하상의 변화는 거의 없었다. 이 연구는 한국건설기술연구원(주요사업 과제번호: 20190157-001과 20190116-001)의 지원에 의한 것이다.
Lead is a very useful material in shielding radiation in hospitals. But lead is toxic. Therefore, there are many studies on substitutable materials, Typically, there are many studies using tungsten. In this study, we investigated the physical properties of lead and tungsten and the Half value layer. As a result, lead having higher atomic number showed higher cross - sectional area than tungsten. But, at the same size, the electron density of tungsten with a high density is about 1.7 times higher than that of lead. In MCNPX simulation, the shielding effect of tungsten is about 1.4 times higher than that of lead, It was confirmed that tungsten had better shielding efficiency than lead. However, considering the economic aspect, tungsten is a rare metal, which is about 25 times more expensive than lead, which is considered to be inappropriate as an alternative to lead.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.