• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.338-338
• /
• 2016

준설은 흙 또는 모래, 자갈을 파내는 작업을 말하는 것으로, 준설의 목적은 수로, 하천, 항만공사에서 수심의 증가 및 수심을 유지하기 위함이다(산업안전대사전, 2004). 이러한 준설은 하천의 흐름 특성 및 제반 여건 변화를 수반하기도 한다. 준설 직후 낮아진 하상으로 인하여 수위가 감소되는 경우가 있으며, 반면에 수위 저하를 동반하지 않는 경우(저수지와 연결된 준설), 준설 부근에 퇴적이 발생하며 이는 하천의 수위 상승으로 연결될 수 있다. 이러한 수위 상승은 홍수 시 제방의 월류 가능성을 높이는 등 하천의 치수 안전성에 문제를 야기할 수 있다. 본 연구에서는 준설로 인한 하천의 수위 상승에 초점을 맞추었다. 기존 연구에서는 대부분 이러한 현상분석을 위해 수치해석을 이용하였으며, HEC-6, CCHE2D, GSTARS 등의 1, 2차원 수치해석 프로그램을 이용하였다. 그러나 1, 2 차원 수치모형은 수심에 따른 흐름특성을 충분히 반영하지 못하는 한계점을 가진다. 이에 본 연구에서는 3차원 수치해석 모형인 SCHISM을 이용하였다. SCHISM은 하구역의 흐름특성을 분석하기 위해 개발된 프로그램으로, 본 연구와 같이 단면의 급 확대부의 수치해석에 적합한 프로그램이라고 판단된다. 기존연구를 바탕으로 하상변동에 영향을 주는 인자를 산정하여 무차원화 하였으며, 하상 변동량 및 수위상승 영향의 민감도 분석을 수행하였다. 무차원인자는 준설깊이/상류수심(H/hu), 하류하폭/상류하폭($W_d/W_u$), 하류수심/상류수심($h_d/h_u$), 유량(Q)으로 결정하였다. 수치해석에 이용된 지형은 1: 2 경사의 제방을 가진 직선수로이며, 준설 구간을 기준으로 상 하류 각각 1,000 m의 길이를 확보하였다. SCHISM 수치모의를 통하여 민감도 분석을 수행한 결과 모든 수치해석 case에서 퇴적으로 인한 상류수위의 증가를 확인 할 수 있었다. 또한 하류수심/상류수심은 준설부 퇴적 및 상류 수위 상승에 가장 큰 영향을 주는 인자로 나타났다. 본 연구는 하천 준설 계획 시 참고자료로 활용이 가능할 것이며, 준설로 인한 하천수리특성 변화의 선행연구로써 의미가 있다고 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.2
• /
• pp.317-325
• /
• 2019

A suction caisson has been widely used for anchor and foundation of offshore structures due to its broad application, simple installation, and rapid construction. In design of suction caisson foundation, the bearing capacity and the stability of soil are mainly dealt with and analysis methods for them are presented in design codes related to the foundation. On the other hand, the method for structural safety analysis of the suction caisson is not generalized, in particular for load modeling of the caisson under suction. Consequently, there are difficulties in design of the caisson cross section. For this reason, this study analyzed the magnitude and distribution of pore water pressure on inner and outer surface of the caisson using theoretical and numerical seepage analyse, and an approach to reasonably estimate the load applied to the structural analysis of the caisson was presented. Furthermore, effects of penetration depth, anisotropy of permeability, and suction pressure on the pore water pressure were analyzed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.61-61
• /
• 2023

우리나라는 여름철 집중호우 시 발생하는 홍수로 인해 중소하천의 확폭(Widening) 및 하안침식이 자주 발생하고 있으나, 이에 대해 홍수 피해 관점으로만 분석되고 있으며 체계적인 수리학적, 지형학적 분석은 미흡한 실정이다. 본 연구에서는 먼저, 1982-2022년의 지도 및 항공사진, 정사영상 등을 분석하여 포항시 신광천과 냉천 중류의 하도 변화를 살펴보고, 2022년 9월 태풍 힌남노의 내습 시 발생한 홍수로 인해 초래된 하도 변화를 분석하였다. 신광천 항사리 지점의 경우, 하천 우안에 제방이 축조되지 않았던 1982년에는 하폭이 상대적으로 넓었으나, 1992년 제방 축조 이후 우안 충적지가 하도에서 분리되며 하폭이 감소하였다. 2011년의 하도는 대부분의 면적이 식생으로 덮여 하천의 흐름이 잘 관찰되지 않으나, 2021년에 식생 제거로 하도가 식별되지만 하폭은 과거에 비해 더욱 감소하였다. 태풍 힌남노 내습 시 포항시의 6시간 누적 강우량은 315.3 mm 로 100년 빈도를 초과하는 집중호우가 발생하였으며, 그 결과 확폭이 발생하였다. 단면에서 보면 좌안 활주사면은 5 m 가량의 퇴적고를 보였고, 우안 공격사면은 평균 23.3 m 측방으로 침식되었다. 그 결과 1982년 하폭과 유사한 수준으로 확대되었다. 문덕리 지점(공장지대)과 냉천 용산리(아파트)의 경우에도 각각 평균 14 m, 18 m 의 하안침식을 보였다. 이러한 결과는 지난 30여 년 전 축조된 기존 제방이 유실되면서 발생한 것으로 홍수로 인해 과거의 하폭으로 복귀할 수 있음을 의미한다. 2022년 홍수에 의한 하도 변화와 같은 지형학적 변화를 고려할 때, 보다 안정적인 하천관리를 위해서는 하천 설계 시 과거 지도상의 하도 범위 및 기왕홍수로 인한 하안선 변동을 고려하는 것이 필요하다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.335-335
• /
• 2021

하천의 홍수터는 평상시 수면위로 노출되어 국민의 여가생활을 위한 공원, 주차장 등으로 활용되다 홍수기 수위가 상승하면 침수되는 하천공간이다. 홍수범람 면적 또는 홍수위 산정을 위한 수치모의 시, 홍수의 평면적인 변화를 분석하기 위해서는 1차원 모의결과와 지형정보를 연계하여 범람면적을 산정하거나 2차원 수치모형의 격자를 대상공간에 대하여 구축한 후 모의를 수행한다. 1차원 수치모형은 계산효율이 우수하고 지류의 합류에 의한 영향을 다수 반영하거나, 긴 구간의 하천단면 구축을 통하여 경계조건이 수치해석 결과에 미치는 영향을 최소화할 수 있는 장점이 있다. 그러나 지형의 영향으로 발생하는 국부적인 유속변화와 유향의 평면적인 분포에 의해 발생하는 범람면적의 변화를 반영하기 어렵다. 홍수범람을 고려하여 제작하는 홍수위험지도는 2차원 수치모형의 결과를 기반으로 한다. 2차원 수치모형은 하도의 만곡, 제방의 형상 등과 같은 지형에 의한 유속장의 변화, 흐름영역의 수축 및 확대에 의한 유속의 변화 등을 자세히 반영할 수 있는 장점이 있다. 반면에 수치격자 생성 및 계산결과 도출에 소요되는 시간이 길고 계산영역 설정의 한계로 인하여 경계조건이 흐름해석결과에 영향을 미칠 수 있는 문제점이 있다. 이와 같은 문제점을 해결하기 위하여 국내외적으로 1차원과 2차원 수치해석기법을 연계하여 하나의 모형으로 구축한 1-2차원 수치해석 모형이 개발 또는 적용되고 있다. 1-2차원 연계해석기법은 1차원 해석영역과 2차원 해석영역을 연계함에 있어서 흐름방향 연계와 횡방향 연계로 구분할 수 있다. 본 연구에서는 1차원과 2차원 수치해석을 연계하는 기법에 따라서 발생하는 수치모의결과를 비교하고 적용성을 검토하였다. 수리실험 관측결과가 있는 사례에 모형을 적용한 후, 한강지형에 수치모형을 적용하고 그 결과를 비교한다. 또한, 계산에 소요되는 시간을 비교하기 위하여 2차원 수치격자의 해상도를 다양하게 적용하여 수치실험을 수행한다. 분석결과를 기반으로 홍수위험지도 제작, 홍수위산정 및 홍수예보 등에 새로운 기술의 적용성을 검토한다.

• Restorative Dentistry and Endodontics
• /
• v.33 no.1
• /
• pp.66-75
• /
• 2008

This study examined the influence of the apical sizes on the sealing ability of a root canal filling. Thirty-six single rooted teeth with a single canal were divided into 3 groups (n = 12) and instrumented with either the $Profile^{(R)}$ or $LightSpeed^{(R)}$ system to achieve three different apical sizes (master apical file [MAF] of #25, #40, or #60). The teeth were filled with gutta perch a using a modified continuous wave technique. The level of microleakage was determined by immersing ten teeth from each group into India ink for 1 week followed by clearing with nitric acid, ethyl-alcohol, and methylsalicylate. The microleakage was measured using vernier calipers. The data was analyzed statistically using Kruskal-Wallis one-way ANOVA and a Student-Newman-Keuls Method. Two teeth from each group were sectioned horizontally at 1, 2, 3 and 4 mm from the apex in order to observe a cross section. The apical size was significantly (p < .05) influenced the level of microleakage. In the Student-Newman-Deuls Method, MAF sizes of #25 and #40; and MAF sizes of #25 and #60, respectively showed a statistically significant difference. There was no significant difference between #40 and #60. In most cross sections, oval-shaped canals were observed, and the irregularity of the internal surface increased with decreasing apical size. There was also an increase in the area of recess, which is the area where the canal space is not filled with either gutta-percha or sealer. When the root canals are filled using a modified continuous wave technique, canal filling with more consistent and predictable outcome may be expected as the apical preparation size is increased.

• Archives of design research
• /
• v.16 no.4
• /
• pp.185-196
• /
• 2003

The demand for an environment-friendly transportation system, equipped with low energy consumption, and low-or zero-pollution has been on the increase since the beginning of the World Trade Organization era. Simultaneously, the consistent growth of high-speed tram technology, combined with market share, has sparked a fierce competition among technologically-advanced countries like France, Germany, and Japan in an effort to keep the lead in high-speed train technology via extensive Research and development(R＆D) expenses. These countries are leaders in the race to implement the next-generation transportation system, build intercontinental rail way networks and export the high-speed train as a major industry commodity. The need to develop our own(Korean) 'high-speed train' technology and its core system technology layouts including original technology serves a few objectives: They boost the national competitive edge; they develop an environmental friendly rail road system that can cope with globalization and minimize the social and economic losses created by the growing traffic-congested delivery costs, environment pollution, and public discomforts. In turn, the 'G7 Project-Development of High Speed Railway Technology' held between 1996 and 2002 for a six-year period was focused on designing a domestic train capable of traveling at a speed of 350km/h combined and led to the actual implementation of engineering and producing the '2000 high-speed train:' This paper summarizes and introduces one of the G7 Projects-specifically, the design segment achievement within the development of train system engineering technology. It is true that the design aspect of the Korean domestic railway system program as a whole was lacking when compared with the advanced railroad countries whose early phase of train design emphasized the design aspect. However, having allowed the active participation of expert designers in the early phase of train design in the current project has led to a new era of domestic train development and the implementation of a way to meet demand flexibly with newly designed trains. The idea of a high-speed train in Korea and its design concept is well-conceived: a faster, more pleasant, and silent based Korean high-speed train that facilitates a new travel culture. A Korean-type of high-speed train is acknowledged by passengers who travel in such trains. The Korean high-speed prototype train has been born, combining aerodynamic air-cushioned design, which is the embodiment of Korean original design of forehead of power car minimized aerodynamic resistance using a curved car body profile, and the improvement of the interior design with ergonomics and the accommodation of the vestibule area through the study of passenger behavior and social culture that is based on the general passenger car.

• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.265-271
• /
• 2021

The pattern of the tree's internal swelling depends on many causes. Since it is difficult to detect these various causes of swelling with a general method, if the state of swelling for a long time cannot be confirmed, serious damage to the trees may occur due to enlargement of the swelling area. In the method of acquiring a tree tomography image, an impulse passing through the tree is generated by tapping the sensor with a rubber mallet, and the moving speed is recorded. In this paper, to measure cracks, cavities, and swelling due to physical damage, we developed a 3D viewer that can know the internal state of a tree using a tree cross-section image acquired from Arbotom to determine the degree of swelling inside the tree. Based on this, we tried to present data that can be referred to when surgical operation of trees is required. In order to acquire a tomographic image of a tree, 6 sensors were attached to the three Yangpala and Maple trees, and a 1 m-long tree was measured using the Arbotom program, and a 3D image was implemented through the 3D Viewer created using MATLAB. In addition to simply acquiring images, the cross-sectional length and volume of the tree were measured. In the actually produced 3D Viewer, the length of the part where the swelling of the maple tree occurred was 33.12 cm, and the swelling of the yangpala tree was measured as 21.41 cm. The volume of the maple tree was measured to be 78.832 ㎤. As a result of comparing the cross-sectional image of the Arbotom and the 3D image, the same result as the real aspect of the tree was obtained, so it can be judged that the reliability of the manufactured software is also secured, and data to be applied to the surgical tree operation through the created Viewer is provided. It is believed that the damage will be minimized.

• Korean Journal of Soil Science and Fertilizer
• /
• v.12 no.2
• /
• pp.99-107
• /
• 1979

The properties, land use and genesis of the Jang-weon series, Planosol-like soils, distributed in Cheong-do area were investigated. Planosol-like soils in Korea have been believed unsuitable for perennial crops but 34.6% (594ha) of the Jang-weon soils in Cheongdo-gun are used for perennial crops such as apples, persimmons, peaches, mulberry etc. With productivity more or less equal to alluvial soils. The reason for high productivity and a working hypothesis for the genesis of the fragipan is suggested with discussion.

• Journal of Korea Water Resources Association
• /
• v.42 no.12
• /
• pp.1079-1089
• /
• 2009

The objective of this study is to develop the accurate, robust and high resolution two-dimensional numerical model that solves the computationally difficult hydraulic problems, including the wave front propagation over dry bed and abrupt change in bathymetry. The developed model in this study solves the conservative form of the two-dimensional shallow water equations using an unsplit finite volume scheme and HLLC approximate Riemann solvers to compute the interface fluxes. Bed-slope term is discretized by the divergence theorem in the framework of FVM for application of unsplit scheme. Accurate and stable SGM, in conjunction with the MUSCL which is second-order-accurate both in space and time, is adopted to balance with fluxes and source terms. The exact C-property is shown to be satisfied for balancing the fluxes and the source terms. Since the spurious oscillations in second-order schemes are inherent, an efficient slope limiting technique is used to supply TVD property. The accuracy, conservation property and application of developed model are verified by comparing numerical solution with analytical solution and experimental data through the simulations of one-dimensional dam break flow without bed slope, steady transcritical flow over a hump and two-dimensional dam break flow with a constriction.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.875-881
• /
• 2013

The failure of a bolted joint owing to stress corrosion cracking (SCC) has been considered one of the most important structural integrity issues in a nuclear power plant. In this study, the failure possibility of bolting, which is used to support the steam generator of a pressurized water reactor, owing to SCC and brittle fracture was evaluated in accordance with guidelines proposed by the Electric Power Research Institute, which are called the Reference Flaw Factor method. For this evaluation, first, detailed finite element stress analyses were conducted to obtain the actual nominal stresses of bolting in which either service loads or bolt preloads were considered. Based on these nominal stresses, the structural integrity of bolting was addressed from the viewpoints of SCC and toughness. In addition, the accuracy of the EPRI Reference Flaw Factor for assessing bolting failure was investigated using finite element fracture mechanics analyses.