• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1407-1411
• /
• 2007

현재까지 우리나라에서 주로 사용되고 있는 2차원 흐름 해석모형은 미연방 도로국(U.S. Federal Highway Administration)과 연계하여 Brigham Young University에서 개발된 SMS(Surface-Water Modeling System) 모형이다. SMS모형 중 이송 확산 모형으로는 RMA-4가 포함되나 이 모형은 최신 수치기법을 반영하지 못하는 등의 문제점들로 인해 실제 물리적 현상 모의에 있어서 한계를 가지고 있다. 따라서 물리적 현상에 대한 적절한 모의를 위한 개선과정을 통하여 RAM4가 개발되었다. 본 연구에서는 현장실측 자료를 바탕으로 RMA-4와의 모의결과 비교를 통하여 오염 확산 해석모형인 RAM4의 적용성을 검증하고자 하였다. RAM4와 RMA-4 모의에 있어서 격자구성과 경계조건은 동일하게 설정하였으며, 유량조건은 평수량과 갈수량으로 선정하였다. 각각의 유량시 수위조건이 틀려지므로 각 유량조건에 대한 격자구성을 달리하였다. 모의구간은 낙동강 본류의 수산대교에서 삼랑진 철교까지의 약 13km 구간을 대상으로 하였다. 모의 구간내에는 밀양-하남 하수처리장이 상류 좌안측에 위치하고 있고, 만곡, 단면의 축소 및 확대, 하중도, 합류 등의 지형학적 특징들이 비교적 짧은 구간에 나타나고 있어 모형의 검증에 적합하다고 판단된다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.177-178
• /
• 2009

DLC (Diamond-like Carbon) 코팅막은 저마찰, 고경도, 낮은 표면조도 등의 우수한 특성을 갖는 박막 물질로 다양한 산업분야에서 그 코팅막의 활용을 목적으로 응용연구가 활발하게 이루어지고 있다. 본 연구에서는 플라즈마 화학기상증착(PCVD) 공정을 이용하여 바이어스, 진공도, 공정 온도 등의 코팅 조건 변수를 이용하여 DLC 코팅막을 제작하였다. 또한, 코팅막은 공정 조건에 따라 증착속도, 표면 및 단면 조직, 밀착력, 경도, 마찰계수 등의 특성을 평가하였다. 플라즈마 화학기상증착법을 이용한 DLC 코팅막 제조는 상온과 $175^{\circ}C$에서 이루어졌으며, 저온 중 DLC 코팅막 제조가 가능해짐에 따라 고분자 와 같은 저융점을 갖는 피처리물의 코팅처리가 가능하여 산업적 응용의 확대가 기대된다. SEM 표면 조직 관찰에 따른 DLC 코팅막의 표면조직과 조도는 공정조건에 따라 큰 차이는 보이지 않았지만, 밀착력에 있어서는 매우 큰 차이를 나타내었다. 스크래치 시험 결과 가장 높은 밀착력은 100 N 이상을 나타내었으며, 이 때의 마찰계수는 약 0.02를 나타내었다. 가장 낮은 마찰계수는 약 0.01을 보였으며, 이때의 밀착력은 25 N을 나타내었다. 증착속도는 바이어스 전압의 증가에 따라 증가하는 경향을 나타내었으며, 온도의 증가에 따라 감소하는 경향을 나타내었다.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.2
• /
• pp.187-195
• /
• 2012

Daisetsuzan National Park in Hokkaido, Japan, has an extensive alpine region due to the topographic feature of lava plateau, and exhibits the surface geology largely composed of pyroclastic materials. In addition, the peak season of mountain climbing in the park coincides with a snow-melting period, resulting in severe soil erosion along hiking trails generated by human trampling, snow-melting water and pipkrake. Trail section has been particularly enlarged because the snow-melting water scours a trail surface and the pipkrake erodes sidewalls of a trapezoid-shaped trail. The scoured tread also forces hikers to walk out of a trail, and then frequently brings about path divergence as well as path widening. The soil particles, which are produced by erosional processes in a slope reach, flow downward, and cause the secondary trail degradation by covering a tread in a flat reach and nearby grassland.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.218-218
• /
• 2020

우리나라의 하천은 홍수방어와 토지이용을 목적으로 제방을 설치하고 하도를 직강화화 시켰으며, 저수로와 홍수터를 분리하는 단면의 조성 그리고 하천의 홍수터를 농경지나 공원 및·주차장 등으로 활용하는 등 홍수터를 인위적으로 고착화시켜왔다. 더욱이, 상류의 댐 및 저수지에서 방류량을 조절함으로써 중소규모의 홍수가 줄어드는 등 하천 흐름의 변화를 나타내는 유황이 단순해져 하상변화가 감소되고 건조화됨으로 인하여, 식생침입 등에 따른 하천 수림화가 진행되고 이로 인하여 하천이 습지라고 볼 수 없는 육역화 현상이 심화되고 있는 현실이다. 따라서 자연과 인간이 공존하기 위한 올바른 하천환경 관리를 위하여 해당하천에 대한 육역화의 원인규명 및 대책수립이 필요하다. 본 연구에서는 1986년에 신곡 수중보가 건설되었고 이로인하여 하류의 수리적 환경 등의 여건변화로 사주의 변화가 급격히 진행된 한강의 장항습지를 대상으로 하천 육역화 현황 분석 및 외국의 하천 육역화 복원사례를 통하여 장항습지에서의 복원방안을 제안하였다. 장항습지는 한강하구를 향하여 우안으로 가늘고 길게 형성된 사주로서, 본 연구에서는 종단길이 약 7.5km(신곡수중보~일산대교)를 대상으로 하였으며, 조사구간 내 사주의 폭은 최장 약 500m, 최단 약 60m 정도이다. 장항습지의 경년별 면적비교 결과, 장항습지는 1985년대비 현재 약 11.7배로 확대되었으며, 특히 2016년도에 급격히 증가된 것으로 분석되었다.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.4
• /
• pp.113-132
• /
• 1999

Recently in Korea, application of the soil nailing is gradually extended to the sites of excavations and slopes having various ground conditions and field characteristics. Design of the soil nailing is generally carried out in two steps, The First step is to examine the minimum safety factor against a sliding of the reinforced nailed-soil mass based on the limit equilibrium approach, and the second step is to check the maximum displacement expected to occur at facing using the numerical analysis technique. However, design parameters related to the soil nailing system are so various that a reliable design method considering interrelationships between these design parameters is continuously necessary. Additionally, taking into account the anisotropic characteristics of in-situ grounds, disturbances in collecting the soil samples and errors in measurements, a systematic analysis of the field measurement data as well as a rational technique of the optimum design is required to improve with respect to economical efficiency. As a part of these purposes, in the present study, a procedure for the optimum design of a soil nailing excavation wall system is proposed. Focusing on a minimization of the expenses in construction, the optimum design procedure is formulated based on the genetic algorithm. Neural network theory is further adopted in predicting the maximum horizontal displacement at a shotcrete facing. Using the proposed procedure, various effects of relevant design parameters are also analyzed. Finally, an optimized design section is compared with the existing design section at the excavation site being constructed, in order to verify a validity of the proposed procedure.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.4
• /
• pp.108-125
• /
• 2013

This study examined the actual reconstruction drawing, composite mineral, particle size and property test, fine organic matters, color differences and main ingredients of the earthen mold excavated in Dongcheon-dong, Gyungju. The cross-section of the inner mold and outer mold divides into inside (1st layer) and outside (2nd layer), with organic matters mixed outside. The cross-section has been altered due to heat and form removal agent. X-ray analysis revealed that the layer was made of minerals with high transmissivity and only quartz particles were observed through a polarizing microscope. The inside of cross-section in SEM observation identified enlarged air gap, with crack developed in the center, but no changes observed on the outside. The particle size of the composites is almost the same for the inner mold and outer mold and is silt clay loam. The ratio between silt clay and silt clay loam was about 2.7:1 and 2.9:1 respectively. In the property test, the density and absorption rate of inner mold and outer mold were similar, but porosity was different, with inner mold of 27.36% and outer mold of 31.09%. The color difference of cross-section seems to have been caused by the spread of soot on the 1st layer surface for removal of form or by the covering of ink to protect the 1st layer. Composite mineral analysis revealed the same composition for the inner mold and outer mold, except for the magnetite that was detected in the inner mold alone. As for the main ingredient analysis, the average content of $SiO_2$ was 71.64% and that of $Al_2O_3$ was 14.59%. As for the sub-ingredients, $Fe_2O_3$ was 4.51%, $K_2O$ 3.06%, $Na_2O$, MgO, CaO, $TiO_2$, $P_2O_5$ and MnO was less than 2%.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.3B
• /
• pp.175-183
• /
• 2012

In this study, Galerkin scheme and SU/PG scheme of Petrov-Galerkin family were applied to the shallow water equations and a finite element model for shallow water flow was developed. Numerical simulations were conducted in several flumes with convection-dominated flow condition. Flow simulation of channel with slender structure in the water course revealed that Galerkin and SU/PG schemes showed similar results under very low Fr number and Re number condition. However, when the Fr number increased up to 1.58, Galerkin scheme did not converge while SU/PG scheme produced stable solutions after 5 iterations by Newton-Raphson method. For the transcritical flow simulation in diverging channel, the present model predicted the hydraulic jump accurately in terms of the jump location, the depth slope, and the flow depth after jump, and the numerical results showed good agreements with the hydraulic experiments carried out by Khalifa(1980). In the oblique hydraulic jump simulation, in which convection-dominated supercritical flow (Fr=2.74) evolves, Galerkin scheme blew up just after the first iteration of the initial time step. However, SU/PG scheme captured the boundary of oblique hydraulic jump accurately without numerical oscillation. The maximum errors quantified with exact solutions were less than 0.2% in water depth and velocity calculations, and thereby SU/PG scheme predicted the oblique hydraulic jump phenomena more accurately compared with the previous studies (Levin et al., 2006; Ricchiuto et al., 2007).

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.186-199
• /
• 2016

The shoe last which is the framework for the shoemaking is intensively combined with the 3D data and technologies. International shoe companies have already commercialized 3D printing technology in producing the shoe, but domestic shoe companies are still in their early stages. This study used the 3D scanning, 3D modeling and 3D printing of the high-technology to make the shoe last. This 3D producing processes should be helpful in building competitiveness in domestic shoe industry. The 3D foot scanning data of men in 30s(n=200) were collected in SizeKorea(2010). The basic statistics, factor and cluster analysis were performed. They were categorized in 3 groups by 3D foot measurement data, and the standard models were selected in each group. The cross sections in XY, YZ and XZ planes sliced from 3D scan data of the standard model were used in the sketches of the 3D shoe last modeling. The 3D shoe last was modeled by Solidworks CAD and printed by MakerBot Replicator2; a desktop 3D printer. This research showed the potential for utilization of 3D printing technology in the domestic shoe industry. The 3D producing process; 3D scanning, 3D modeling and 3D printing is expected to utilized widely in the fashion industry within the nearest future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.57-64
• /
• 2017

Today, due to the environmental regulations regarding air pollution in the EU, the use of EPS (Styrofoam) as the cushioning material in the packaging industry is decreasing. In effect, air cushioning based cushioning materials are rapidly expanding into the market and replacing EPS, due to their excellent buffering ability and environmental friendliness. This is a new selective filling type air filling material manufacturing technology that affords improvements in the amount of raw materials required, its processing and its aesthetic appearance compared to the conventional air filling cushioning materials. In this study, a multi-stage air cell filling valve molding technology is developed based on selective filling technology, which allows packages to be selectively filled in various forms by applying valve forming structure technology. This multi-stage air cell filling valve molding technology is a technique in which a plurality of injection ports are formed by laminating three layers of films, viz. a first injection film, a valve film, and a second injection film having valve ends. In the conventional technology, a separate external air injection path for injecting air into a plurality of connected air bags is needed. However, in the proposed system, an external air injection path is formed inside the air bag, Due to the lack of need for an injection furnace, the raw material and process are reduced and air is injected and then discharged, while the air bag is reduced in length to 63 ~ 66% of its normal value. The outer surface of the outer air injection path is integrated inside by maintaining the original length of the cross section, while the unnecessary folded air is injected into the interior of the air bag, This smart air filling type cushioning material manufacturing technology constitutes a big improvement over the existing technologies.

• Geophysics and Geophysical Exploration
• /
• v.10 no.2
• /
• pp.138-146
• /
• 2007

This paper describes 2.5D induced polarization (IP) modeling and inversion algorithms using complex resistivity. The complex resistivity method has merits for acquiring more valuable information about hydraulic parameters and pore fluid than the conventional IP methods. The IP modeling and inversion algorithms are developed by allowing complex arithmetic in existing DC modeling and inversion algorithms. The IP modeling and inversion algorithms use a 2.5D DC finite-element algorithm and a damped least-squares method with smoothness constraints, respectively. The accuracy of the IP modeling algorithm is verified by comparing its responses of two synthetic models with two different approaches: linear filtering for a three-layer model and an integral equation method for a 3D model. Results from these methods are well matched to each other. The inversion algorithm is validated by a synthetic example which has two anomalous bodies, one is more conductive but non-polarizable than the background, and the other is polarizable but has the same resistivity as the background. From the inverted section, we can cleary identify each anomalous body with different locations. Furthermore, in order to verify its efficiency to the real filed example, we apply the inversion algorithm to another three-layer model which includes phase anomaly in the second layer.