• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.4
• /
• pp.513-522
• /
• 2017

This study was conducted to examine the relationships between milk and milk product intake and bone health. The data from the 2008~2011 Korean National Health and Nutrition Examination Survey (KNHANES) were used for data analysis. Subjects included 4,626 men and 6,144 women aged 19 to 64 years. Daily intake frequency of milk and milk products was obtained using a food frequency questionnaire and divided into two categories: less than one serving per day and more than one serving per day. Bone mineral density (BMD) values of total femur, femoral neck, and lumbar spine were compared based on daily intake frequency, and relationships between milk and milk product daily intake frequency and osteoporosis risk were evaluated based on logistic regression. In men aged 30~39, BMDs of total femur and femoral neck were significantly higher in the group that consumed milk more than one serving per day (P<0.05). Intake frequency of milk and milk products was also significantly related to both BMDs of total femur and femoral neck. The odds ratio (OR) for milk intake frequency (more than one serving per day) compared to intake frequency less than one serving per day was 0.36 [95% confidence interval (CI) 0.21~0.62], and the OR for milk and milk products intake frequency (more than one serving per day) was 0.49 (95% CI 0.28~0.86) in women aged 50~64. These results indicate that increased consumption of milk and its products is associated with reduced risk of bone health disease, and adequate intakes of milk and milk products might play an important role in maintaining optimum bone health. Further research on the causal relationship and dose-response association between milk intake and bone heath using prospective cohort data is required prior to applying the observed results to programs that prevent bone health problems.

• Radiation Oncology Journal
• /
• v.21 no.2
• /
• pp.167-173
• /
• 2003

Purpose: The purpose of this study was to evaluate whether a GafChromic film applied to stereotactic radiosurgery with a linear accelerator could provide information on the value for acceptance testing and quality control on the absolute dose and relative dose measurements and/or calculation of treatment planning system. Materials and methods: A spherical acrylic phantom, simulating a patient's head, was constructed from three points. The absolute and relative dose distributions could be measured by inserting a GafChromic film into the phantom. We tested the use of a calibrated GafChromic film (MD-55-2, Nuclear Associate, USA) for measuring the optical density. These measurements were achieved by irradiating the films with a dose of 0-112 Gy employing 6 MV photon. To verify the accuracy of the prescribed dose delivery to a target isocenter using a five arc beams (irradiated in 3 Gy per one beam) setup, calculated by the Linapel planning system the absolute dose and relative dose distribution using a GafChromic film were measured. All the irradiated films were digitized with a Lumiscan 75 laser digitizer and processed with the RIT113 film dosimetry system. Results: We verified the linearity of the Optical Density of a MD-55-2 GafChromic film, and measured the depth dose profile of the beam. The absolute dose delivered to the target was close to the prescribed dose of Linapel within an accuracy for the GafChromic film dosimetry (of $\pm$3$\%$), with a measurement uncertainty of $\pm$1 mm for the 50$\~$90$\%$ isodose lines. Conclusion: Our results have shown that the absolute dose and relative dose distribution curves obtained from a GafChromic film can provide information on the value for acceptance. To conclude the GafChromic flim is a convenient and useful dosimetry tool for linac based radiosurgery.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.4
• /
• pp.249-258
• /
• 2001

Compressional wave velocity and electrical resistivity of muddy sediments in the southeastern inner shelf of Korea were studied using nine piston core samples. The acoustic and physical properties were measured with 10 cm depth interval. Sediment structures were examined by x-radiographs of the cored sediments. Subbottom profiles were obtained by a high-resolution acoustic subbottom profiler. Acoustic turbid layers are clearly seen on the profiles, and x-radiographs of the sediments showed degassying structures formed by gas escaping. On the basis of x-radiographic images, velocities, electrical resistivities and physical properties, the sediments are divided into gassy and non-gassy sediments. The presence of gas and degassying structures result in a marked variation in velocity and electrical resistivity. It can be concluded that velocity and electrical resistivity arep arameter to recognize gassy sediment. The velocity is important parameter to indicate gassy sediment.

• Journal of the Korean earth science society
• /
• v.35 no.4
• /
• pp.290-294
• /
• 2014

In this study, we investigated the characteristics of rodent (mainly ground squirrel) burrows found near the Lake Hovsgol, Mongolia. Those burrows are straight to slightly curved and gently inclined in lateral view. Cross-sectional shapes are either circular or elliptical with diameters ranging from mostly 8-10 cm. Most abandoned burrows are passively filled with soils and/or pebbles. The size and architecture of these Mongolian burrows are remarkably similar to those of the previously reported Late Pleistocene burrows from Korea. Therefore, the rodent burrows found at Korean Palaeolithic sites are thought to have been formed by ground squirrels. However, the difference in burrow-fills suggests that the mean annual precipitation of the Korean Peninsula during the Late Pleistocene is much higher than that of Mongolia.

• Journal of Hospice and Palliative Care
• /
• v.20 no.3
• /
• pp.188-193
• /
• 2017

Purpose: There has been very little study on the associations between patient's symptoms themselves and family caregiver (FC)'s depression in the palliative phase. This cross-sectional study was to investigate the relationship between symptom features of terminally ill cancer patients and their FC's depression. Methods: We performed a multicenter survey using the MD Anderson symptom inventory and the Hospital Anxiety and Depression Scale. A total of 293 patient-FC pairs were recruited from seven tertiary medical centers. A multivariate regression analysis was applied for identifying the relevant factors associated with FC depression and for estimating adjusted depression score of FCs. Results: Among various psychosocial factors, low FC quality of life, low social support, spouse, and more caregiving time were significantly associated with FCs' depression. According to the presence of FCs' depression, there were significant differences in some symptom characteristics of patients. Even after adjusting for the relevant confounders, depression scores were lower in FCs caring for patients who had negative symptoms (loss of appetite, P=0.005; drowsiness, P=0.024; and dry mouth, P=0.043) than in FCs caring for patients who had not. FCs caring for patients with severe appetite loss had lower depression scores than those with not severe one (P=0.039). Conclusion: Our result suggests that patient's symptom characteristics might be helpful when evaluating a FC's depression.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.333-343
• /
• 2016

A study on conservation of outdoor painted sculptures has begun to receive attention as increasing numbers of the sculptures, but it is still in an early stage in South Korea. In the case of a painted outdoor object which has been exhibited in National Museum of Modern and Contemporary Art (MMCA), 'Black nana' produced by Niki de Saint Phalle in 1964, deterioration was observed, such as flaking and discolouration of paint layers due to ultraviolet light and a sudden temperature change during an outdoor exhibition. For this reason, prior to treatment of the sculpture, to find out the painting techniques and materials applied, cross section, FT-IR, Raman and Py-GC/Mass were conducted. As a result, the type and colour of the paint agree with results of the other studies as well as deterioration pattern. It is expected that the results of this study will be utilized for treatment proposal and conservation material selection of 'Black nana'. In addition, to determine the artist's intention of the artist, cooperation with the foundation of Niki de Saint Phalle and artist's assistants will be carried out.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.3
• /
• pp.165-173
• /
• 2007

The KAERI Underground Research Tunnel (KURT) located in KAERI (Korea Atomic Energy Research Institute) was recently constructed following the site investigation in 2003. Its dimension is 180 m in length, 6 m in width, and 6 m in height, and it has a horseshoe-like cross-sec-lion and is located in the ground to the depth of 90 m. When the tunnel was dug into the ground with 100 m in length, fresh rocks, weathered rocks and fracture-filling materials were taken and examined by mineralogical and chemical analyses. There are phyllosilicate minerals such as illite, smectite and chlorite including calcite, which are filling some faults and cracks of the KURT rock. The illite and smectite usually coexist in the fracture, where their content ratio is different according to which mineral is predominant. There are high concentrations of U and Th in the rocks coated with iron-oxides and filled with secondary materials as compared with those in the fresh rocks. It seems that the radionuclides, which are slowly leached from the parent rocks or exist as a dissolved form in the groundwater and hydrothermal solution, may have been migrated along the fractures and thereafter selectively sorbed and coprecipitated on the iron-oxides and the fracture-filling materials. These results will be very useful far the evaluation of environmental factors affecting the nuclides migration and retardation when long-term safety is considered to the geological disposal of high-level radioactive wastes in the future.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.6
• /
• pp.501-517
• /
• 2011

In general, the tunnel stability during excavation is assessed by comparing measured displacements at roof and sidewall to control criteria. The control criteria were established based on the past experience that considered ground conditions, size of the tunnel cross section, construction method, supports, etc. Therefore, a number of researches on the control criteria using the critical strain have been conducted. However, the critical strain obtained from uniaxial compression tests have drawbacks of not taking damage in rock mass due to increase of stress level and longitudinal arching into account. In this paper, damage-controlled tests simulating stress level and longitudinal arching during tunnel excavation were carried out in addition to uniaxial compression tests to investigate the critical strain characteristics of granite and gneiss that are most abundant rock types in Korean peninsula. Then, the critical strains obtained from damage-controlled tests were compared to those from uniaxial compression tests; the former showed less values than the latter. These results show that the critical strain obtained from uniaxial compression tests has to be reduced a little bit to take stress history during tunnel excavation into account. Moreover, the damage critical strain was proposed to be used for assessment of the brittle failure that usually occurs in deep tunnels.

• Tunnel and Underground Space
• /
• v.22 no.6
• /
• pp.412-428
• /
• 2012

To achieve mine development, a large amount of data concerned with the geological structure and the ore body had to be investigated and collected through geological survey, drilling and geophysical explorations. In most previous cases, however, the data were usually analyzed two dimensionally and those results showed some limits because of their 2D presentation. Those 2D maps such as geological plane sections or longitudinal sections cause lots of difficulties in understanding the complex geological structure or the feature of ore body in a spatial way. In this study, research area was set on the abandoned Yangyang iron mine in Korea and the Sugaeng ore body within the mine was selected as the research target to design a mine haulage system for reopening. A 3D mine model of this area was tried to be constructed using a 3D modelling software, GEMS. An accurate 3D model including the ore body, the geological structure, the old underground mine drifts and the new mine drifts was constructed under the purpose of reopening of the abandoned iron mine. Especially, mine design for trackless haulage system was conducted. New inclines and drifts were planned and modelled 3 dimensionally considering the utilization of old drifts and shaft. In addition to the 3D modelling, geostatistical technique was adopted to generate a spatial distribution of the ore grade and the rock physical properties. 3D model would be able to contribute in solving problems such as evaluating ore reserves, planning the mine development and additional explorations and changing the development plans, etc.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.281-292
• /
• 2008

In Korea-LTPP(Long Tenn Pavement Performance) project, the full depth asphalt pavement test sections are constructed on the national highway to evaluate the structural capacity of asphalt pavement reinforced with glass fiber. Truck loading test and FWD test were performed to measure the structural capacity of test sections. Test results showed that the reinforcement of glass fiber installed at between surface and intermediate asphalt layer decreased the strain at the bottom of surface layer and moved up the stress neutral axis in asphalt layer. As a result, the tensile stress was developed at the bottom of intermediate asphalt layer of reinforced asphalt pavement, while the compressive stress was developed at the bottom of intermediate asphalt layer of unreinforced asphalt pavement. On the other hand, the tensile strain at the bottom of asphalt base layer didn't show a difference between glass fiber reinforced and unreinforced pavements. From the FWD test, it was shown that the surface deflection of asphalt pavement reinforced with glass fiber decreased 24 percents comparing to that of unreinforced asphalt pavement. This shows that the reinforcement with glass fiber appears to improve the rutting resistance of asphalt pavement.