• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.235-245
• /
• 2008

The aim of this study was to develop a method for measuring the slumping resistance of resin composites and to relate it to the rheological characteristics. Five commercial hybrid composites (Z100, Z250, DenFil, Tetric Ceram, ClearFil) and a nanofill composite (Z350) were used to make disc-shaped specimens of 2 mm thickness. An aluminum mold with square shaped cutting surface was pressed onto the composite discs to make standardized imprints. The imprints were light-cured either immediately (non-slumped) or after waiting for 3 minutes at $25{\circ}C$ (slumped). White stone replicas were made and then scanned for topography using a laser 3-D profilometer. Slumping resistance index (SRI) was defined as the ratio of the groove depth of the slumped specimen to that of the nonslumped specimen. The pre-cure viscoelasticity of each composite was evaluated by an oscillatory shear test and normal stress was measured by a squeeze test using a rheometer. Flow test was also performed using a flow tester. Correlation analysis was performed to investigate the relationship between the viscoelastic properties and the SRI. SRI varied between the six materials (Z100 < DenFil < Z250 < ClearFil < Tetric Ceram < Z350). The SRI was strongly correlated with the viscous (loss) shear modulus G' but not with the loss tangent. Also, slumping resistance was more closely related to the resistance to shear flow than to the normal stress. Slumping tendency could be quantified using the imprint method and SRI. The index may be applicable to evaluate the clinical handling characteristics of composites.

• Journal of the Korean Chemical Society
• /
• v.54 no.2
• /
• pp.183-191
• /
• 2010

The phase changes of 1-palmitoyl-$d_{31}$-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC_$d_{31}$) bilayers distorted by an antimicrobial peptide, a magainin 2 or an aurein 3.3 were investigated by using $^2H$ solid-state NMR (SSNMR) spectroscopy. From the theoretical simulation of the experimental $^2H$ solid-state NMR spectra the geometric structure constants and the lateral diffusion coefficients were obtained in the peptide-lipid mixture phases. Within five days of the peptide action on the lipid bilayers only the distorted alignment of the bilayers were measured but after 100 days an elliptic toroidal pore structure and an inverted hexagonal phase were formed in the presence of magainin 2 and aurein 3.3, respectively. In order to investigate the effect of an anionic lipid molecule on the actions of two peptides on the lipid bilayer, the same experiments were performed on the POPC_$d_{31}$/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylglycerol (POPG) bilayer and the significant differences in the actions of two peptides on two bilayers of POPC_$d_{31}$ and POPC_$d_{31}$/POPG were measured.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.1
• /
• pp.62-65
• /
• 2010

This study was carried out to estimate the size and exine pattern of pollen grains in seven species of the genus Lilium by using scanning electron microscope. Exine of pollen grains, which were all monad, took the prolate forms with a pollen aperture. However, there were various L/W ratio between length (L) and width (W) of pollen grains among selected Lilium species. The pollen of L. distichum was oblong shape which had the highest L/W ratio of 2.59. On the other hand, that of L. concolor var. partheneion was broadly elliptical shape close to circle which had the lowest L/W ratio of 1.82. The surface patterns of exine were reticulate in all Lilium species that have showed diverse forms in their lumina. Pollen length and width in L. lancifolium had the greatest value, 115.90 and $46.54{\mu}m$, respectively, in comparison with those of L. tsingtauense, 70.33 and $38.72{\mu}m$, respectively. Except L. distichum and L. leichtlinii var. maximowiczii which had a similar pollen length within standard errors, the others in Lilium species showed different sizes, respectively. Therefore, these results indicated that pollen length could be a better standard for the classification of Lilium species than exine surface patterns or pollen dissection area.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.3
• /
• pp.154-164
• /
• 2013

In this study, a new type floating breakwater was proposed to improve the capability of wave attenuation compared with the existing floating breakwater in Wonjun Port, which is located in Masan City, Korea. In order to develop the optimal design, many different configurations considering the shape and location of vertical barrier and horizontal plate were examined based on the shape of existing floating breakwaters in Wonjun and Tongyeong Port. The analytical and numerical results of the new type floating breakwater showed better performance in long-period wave attenuation than the existing floating breakwater in Wonjun. Therefore, the new type floating breakwater can improve harbor tranquility in Wonjun Port.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.439-439
• /
• 2012

태양광 발전은 발전 셀의 특성상 태양광의 일사량, 태양과 셀 단면이 이루는 각도에 따라서 발전량의 차이를 가져온다. 실리콘 태양전지의 전면 texturing은 입사광의 반사율을 크게 감소시키고, 태양전지 내에서 빛의 통과길이를 증가시켜 태양전지 내의 흡수하는 빛의 양을 증가 시키는 역할을 한다. 따라서 전면 texturing은 단락전류를 증대시키는 효과를 가지고 온다. 일반적으로 texturing은 alkaline etching (WET) 공정과 reactive ion etching (RIE) 공정이 사용된다. 그리고 다결정 실리콘 태양전지의 경우에는 재료의 결정방향에 따라 식각이 되어지는 WET 공정의 경우 texturing 모양을 제어할 수 없어 효과적이지 못하는 결과를 가지고 온다. 본 연구에서는 Electroluminescence을 측정하여 RIE, WET 공정을 사용하여 만든 texturing 구조의 다결정 태양전지의 Microcrack 및 Defect, Electrode Failure, Hot spot등을 검출하였으며, ${\mu}$-PCD 측정 결과와 비교 분석하여 Micro carrier life time을 유추하여 계산하였다. 또한 반사율을 측정해본 결과 WET 공정 대비 RIE의 경우 단파장영역에서 반사율이 크게 감소하여, 상대적으로 높은 External quantum efficiency (EQE)가 측정되었다. 이는 Jsc를 증가시켜, 태양전지의 효율이 증가되는 결과를 얻을 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.11
• /
• pp.737-744
• /
• 2016

The printed circuit heat exchanger (PCHE) is regarded as a promising candidate for advanced heat exchangers for the next-generation supercritical $CO_2$ power generation owing to its high compactness and rigid structure. In this study, an innovative type of PCHE, in which the channel sizes for the heat source fluid and heat sink fluid are different, is considered for analysis. The thermal performance of the PCHE, with supercritical $CO_2$ as the working fluid, is numerically analyzed. The results have shown that the thermal performance of the PCHE decreases monotonically when the channel size of either the heat source channel or the heat sink channel, because of the decreased flow velocity. On the other hand, the thermal performance of the PCHE is found to be almost independent of the spacing between the channels. In addition, it was found that the channel cross sectional shape has little effect on the thermal performance when the hydraulic diameter of the channel remains constant.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.12
• /
• pp.53-59
• /
• 2014

In order to obtain basic data for reasonable design of rockfall prevention net unreasonably being designed according to experiences, this paper determined a standard cross section and analyzed the effects of parameters such as inclination and height of slope faces, rockfall weight, separation distance on rockfall behaviors such as bounce height, kinetic energy and passage rate. The weight of rockfall changed from 400 kg to 700 kg and then to 1,000 kg. With the height of 20 m as the standard, the test was conducted with the inclination at $63^{\circ}$ and $55^{\circ}$ which may affect rockfall behaviors. Analysis was made while changing the fall height of rockfall from 3 m to 15 m and then to 20 m, thereby analyzing and evaluating changes in maximal kinetic energy occurring in the base of slope. According to the analysis result, in designing a rockfall prevention wire net, a design considering various conditions including inclination of the slope, expected size or weight of rockfall, situation of the slope and the shape of rockfall, and rockfall trace is judged necessary beyond the current uniform application.

• Parasites, Hosts and Diseases
• /
• v.31 no.3
• /
• pp.183-192
• /
• 1993

A transmission electron microscopic study was performed to observe the ultrastructures of the male germinal cells and spermatozoa of Fibricola seoulensis. Spermatogonia were found in the periphery of the testis and characterized by large nuclei and comparatively little cytoplasms. Spermatocytes contained an oval to spherical nucleus. Their nuclear volume was little larger in comparative to that of cytoplasm, and the chromatin was comparatively little. The early spermatids were characterized by a great amount of cytoplasm, and numerous mitochondria encircled the nucleus. In a more advanced spermatids the electron-dense strands of chromatin appeared in the nucleus, and a pair of rootlet of the axoneme and a microtubule-organizing center (MTOC) were observed near the nucleus. The sectioned spermatozoa were found in the testis and the seminal vesicle. Their cross sectional views were divided into 6 types when they were distinguished on the basis of the morphology and components. The spermatozoa of F. seoulensis showed two flagella of 9+1 type axoneme.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.2 no.2 s.5
• /
• pp.95-104
• /
• 2002

This paper presents the pull-out failure mode on Headed Bars and prediction of tensile capacity, as governed by concrete cone failure. 17 different plate types, three different concrete strengths and three different welding types of specimens were simulated. Test variables are the reinforcing bar diameters connected to headed plate (e.g., 16mm, 19mm and 22mm), the head plate shapes (e.g., circular, square, rectangular), the dimensions of head plates (e.g., area and thickness), the types of welding scheme for connection of reinforcing bars and head plates (e.g., general welding and friction welding). Headed Bars were manufactured in different areas, which shape and thickness are based on ASTM 970-98. Calculation of Embedment length in concrete is based on CSA 23.3-94, and static tensile load was applied. Pullout capacities tested were compared to the values determined using current design methods such as ACI-349 and CCD method. If compare experiment results and existings, Headed bar expressed high strength and bigger breakdown radious than standard by wide plate area and anomaly reinforcing rod unlike anchor.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.1 no.1
• /
• pp.64-72
• /
• 2008

Compression neuropathy around elbow and wrist are one of the common disturbing problems in the upper extremity. The understanding of normal nerve architectures and pathophysiologic changes in compression neuropathy is important to interpret the ultrasonographic images correctly. Compression neuropathies have characteristic ultrasonographic imaging features of flattened nerve at compression and hypoechoic swollen nerve with loss of fascicular patterns at proximal segments. Dynamic ultrasonographic imagings on motion can show dymanic subluxation of ulnar nerve and medial head of triceps muscle over the medial epicondyle in snapping triceps syndrome. Dynamic compression of median nerve also can be visualized in pronator teres syndrome by dynamic imaging studies. A quantitative measures of cross sectional area or compression ratio can be helpful to diagnose compression neuropathies, such as carpal tunnel syndrome or cubital tunnel syndrome. With the clinical features and electeophysiologic studies, the untrasonographic imagings are useful tool for evaluation of the compression neuropathies in the upper extremities.