• Textile Coloration and Finishing
• /
• v.31 no.2
• /
• pp.77-87
• /
• 2019

To improve rubbing fastness of the printed fabrics, the binder polymers for Digital Textile Printing(DTP) pigment inks were synthesized with miniemulsion polymerization using various acrylic monomers, which are MMA(Methyl methacrylate), BA(Butyl acrylate), and Self-crosslinking monomers, such as NEA(N-Ethylol acrylamide) and MAA (Methacrylic acid). The acrylic monomer compositions were varied when synthesizing the binder polymers and their particle size distributions, average molecular weights, and Tgs were investigated. The prepared binder polymers were applied to prepare Cyan, Black, Yellow and Magenta pigment ink for DTP and the prepared inks were used to dye cotton fabrics. Then, color strength, and rubbing fastness were also investigated to study the effect of the comonomer compositions of the binder polymer on the color strength and rubbing fastness of the resulting pigment inks.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1627-1634
• /
• 2020

In this study, water-based acrylic adhesives as copolymers with acrylic acid, 2-hydroxyethyl acrylate were synthesized using ethyl acrylate, 2-ethylhexyl acrylate, and lauryl methacrylate as the main monomers. Prepared water-based acrylic adhesive was compared to physical properties such as solid content, average particle size distribution, initial adhesive force, maximum adhesive force, peel strength, and heat resistance.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.444-446
• /
• 2011

Nanosized polystyrene (PS) particles with the narrow size distribution were synthesized from styrene monomer at the presence of the surfactant (polyvinylpyrrolidone, PVP), the solvent of 95 % alcohol, and the initiator of benzoyl peroxide (BPO). Since the emulsion polymerization method was applied, many factors could have effects on the size of PS particles during polymeric process. Aside from the concentration of monomer, surfactant and initiator, the factors such as the stirring speed and the ultrasonic radiation were mainly studied. By adjusting the radiating time, PS particles with their size of about 400 nm were synthesized.

• Korean Journal of Materials Research
• /
• v.3 no.6
• /
• pp.598-605
• /
• 1993

Methacryloxyethyl dimethyl alkyl($C_{1}\sim C_{12}$, benzyl and 2, 2-diethoxy ethyl) ammonium bromide monomers were prepared to investigate the relative humidity characteristics for polymer electrolytes with different chemical structures. They were coated on the alumna substrate printed comblike gold electrode by photopolymerization after micro-syringe injection. As the thickness of rhe humid membrane increased, the impendance decreased, whereas the impedance ~ncreased as the carbon cham of alkyl substituent in the monomer increased. The impendance of the polymeric electrolytes with $C_6\sim C_8$ substituents were varied from 19M$\Omega$ to 5K$\Omega$ for the range of 30-90% Mi. The temperature depedence coefficient in the range of 15-$35^{\circ}C$ was found to be -0.45% $RH/^{\circ}C$and the hysteresis falled within the range of $\pm$2% RH. The response time was 35 second for varying humldity from 33% to 85% RH.

• Membrane Journal
• /
• v.10 no.4
• /
• pp.198-204
• /
• 2000

Pervaporation membranes were fabricated by low temperature plasma treatment the concentrate butanol solution from fermentation process. Effects of power, reaction time, and monomer flow rate were examined to optimize the (W!FM)t value as 4.0389 x 109 J . min/kg. Various organic compounds were tested in plasma treatment. Contact angle and relative sorption ratio were examined in terms of membrane performance. With the increase of contact angle and relative sorption ratio separation factor was enhanced from 0.186 to 3.525. and butanol flux increased from 0.042 to 0.567 kglm2. hr. Hydrophobicity of the membrane increased the affinity with butanoL Heat of mixing for monomer with butanol was examined, but failed to find the trend, because plasma polymerization of monomer produced the new compounds much different from monomers.

• Membrane Journal
• /
• v.14 no.3
• /
• pp.207-217
• /
• 2004

In this study, we prepared nanofiltration membrane by applying the interfacial polymerization method as a way of manufacturing composite membranes. We have examined the effects of various preparation factors such as monomer concentration and composition, thermal curing condition, post treatment condition. In addition to preparation conditions, we also monitored the effects of operation conditions such as feed solution concentration and operation pressure on the permeation properties of the resulting nanofiltration membrane. We intended to increase the permeation rate of nanofiltration membrane by the enlargement of effective surface area using additives during interfacial polymerization step. With increasing the monomer concentration, membrane permeation rate are decreased with maintaining almost constant rejection. With respect to curing condition, with increasing the curing temperature both permeation rate and rejection are decreased. With increasing the ratio of MPD in amino monomer composition, permeation rate decreased drastically with high rejection. With increasing the feed solution concentration, both permeation rate and rejection decreased. Both permeation rates and rejection increased with increasing the operating pressure. Nanofiltration membrane have higher surface roughness with increasing additive concentration in the case of using MPD contained amine composition than using piperazine alone. Permeation rates are much lower than the nanofiltration membrane prepared by piperazine.

• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.385-389
• /
• 2008

Chain propagation and chain transfer in anionic polymerization of hexafluoropropylene oxide were investigated under various reaction conditions such as the stabilization of reaction temperature, the amount of hexafluoropropylene solvent, and the feeding rate of hexafluoropropylene oxide monomer. Anionic initiator for the polymerization was synthesized from cesium fluoride and hexafluoropropylene oxide in tetraethyleneglycol dimethylether. It was possible to obtain a high molecular weight poly(HFPO) ($M_w$ 14800) using the anionic initiator in conditions of stabilized reaction temperature, and optimized addition of solvent and monomer feeding (HFP/initiator mole ratio=31.5 and HFPO feeding rate=11.67 g/hr). Otherwise, chain transfer reaction in anionic polymerization was increased. From the results of molecular weight in various reaction conditions, it was found that chain propagation and chain transfer in anionic polymerization of HFPO were very sensitive to reaction conditions.

• Polymer(Korea)
• /
• v.32 no.2
• /
• pp.138-142
• /
• 2008

Molecularly imprinting technology is an effective method to prepare a synthetic material with a high selectivity to a target molecule. In this study, a molecularly imprinted polymer (MIP) was synthesized via UV-polymerization using theophylline and UV-curable polyester-acrylate resin as a template molecule and a crosslinker, respectively. To elucidate the effects of functional monomer type on the performance of the MIP, each MIP was synthesized using mathacrylic acid, acrylic acid, and acryl amide as functional monomers. Each MIP showed higher rebinding capacity to theophylline than its corresponding non-imprinted polymer (NIP). The MIP synthesized using mathacrylic acid as a functional monomer showed the highest rebinding capacity to theophylline. The selectivity of the MIP was investigated using a solution with caffeine having a very similar structure to theophylline. The binding performance of the MIP to theophylline decreased when distilled water was used as a solvent, which has more polarity than chloroform.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.151-156
• /
• 2015

Herein, novel porous structures were fabricated from monomer solutions of dimethylsiloxane and benzene by directional crystallization in twice. First, a honeycomb-like structure was fabricated by $1^{st}$ directional crystallization of solvent. By infiltration of the solution and subsequent $2^{nd}$ directional crystallization, novel structures of different pores in the honeycomb-like structure were fabricated. The porous materials prepared by the repeated directional crystallization have higher indentation modulus and hardness than those of the samples prepared by single directional crystallization. When a higher solution concentration was used in $2^{nd}$ directional crystallization, the maximum increase (indentation modulus: 2140% increase, indentation hardness: 2330% increase) was obtained. On the other hand, porosity and contact angle were lower in the samples from $2^{nd}$ directional crystallization than those from $1^{st}$ directional crystallization. A large decreases was observed, when a relatively high concentration was used in $2^{nd}$ directional crystallization (porosity: 21% decrease, contact angle: 36% decrease).

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.615-620
• /
• 2010

In this study, five series of novel polyurethanes was synthesized by the polyaddition reaction of diisocyanates such as 2,6-tolylene diisocyanate(2,6-TDI), 2,5-tolylene diisocyanate(2,5-TDI), 2,4-tolylene diisocyanate(2,4-TDI), and 1,4-phenylene diisocyanate(1,4-PDI), hexamethylene diisocyanate(HDI) with 4,4'-Bis(3-hydroxypropoxy)biphenyl (BP3), 4,4'-bis(3-hydroxypropoxy)biphenyl exhibited a smectic type mesophase. Monotropic mesophase was found for all synthesized liquid crystalline polyurethanes except HDI/BP3. In contrast, 1,4-PDI/BP3 without a methyl substituent in the phenylene unit exhibited no explicit mesomorphic behavior, which was confirmed by DSC and polarizing microscopy experiments. Structures of the compound were identified by FT-IR and $^1H$-NMR spectroscopies. Their phase transition temperatures and thermal stability were also investigated by differential scanning calorimetry(DSC), polarized optical microscopy(POM) and x-ray diffraction analysis.