• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.109.1-109.1
• /
• 2016

진공산업 분야에서 OLED 디스플레이가 큰 시장으로 성장하며 크라이오 펌프가운데서 특별히 수분만 집중적으로 배기할 수 있는 워터펌프(CWP or cold trap)가 각광받고 있다. 이에 현민지브이티(Genesis)는 중소기업청 중소기업개발지원사업의 일환으로 진행된 2014년도 구매조건부 신제품 개발사업에 선정되어 '극저온 G-M냉동기를 이용한 대용량 Cold Trap개발'과제를 수행하면서 32인치 급으로 수분에 대해서 30,000[L/s] 이상의 배기속도를 가지는 대형 CWP를 개발하고 있다. 그 일환으로 본 CWP에 장착할 80K에서 200W급 단단 G-M 냉동기를 2015년 국내 최초로 개발하였다. 본 HPS80200(200W @80K) 단단 G-M냉동기에 대한 성능시험을 수행하던 중 기존 평가방식에 보완할 부분이 있음을 확인하였다. 통상적으로 G-M냉동기의 냉동능력은 저온 스테이지 상단에 온도센서와 히터가 설치된 히터 블럭을 장착한 후 일정한 열부하를 인가하면서 77K 또는 80K에서의 냉동능력을 측정한다. 문제는 여기에 설치하는 온도센서의 장착 위치의 중요성이다. 즉, 어느 부위의 온도를 냉동기의 대표 온도로 정하느냐에 따라 냉동기의 성능 값에 큰 차이를 나타내기 때문이다. 실제 확인 결과, 온도는 히터블럭 내의 위치뿐 아니라 저온 스테이지 부위별로도 크게 차이를 보였다. 따라서 본 연구에서는 보다 합리적이고 정확한 냉동 능력 측정을 위해 77K 에서 냉동기의 질소 액화 능력으로 냉동능력을 평가하고자 하였다. 이를 통해 개발된 HPS80200냉동기의 보다 정확한 냉동능력(77K에서 200W 이상임을 확인함)을 측정할 수 있었고 냉동기의 저온 스테이지에서 대표온도로 설정할 수 있는 위치도 확인할 수 있었다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.3_4
• /
• pp.130-137
• /
• 2003

This paper presents the problem of partitioning the Single-Stage Shuffle-Exchange Network(SSEN). An algorithm, named SSEN_to_PSEN, is devised to transform an SSEN into a Partitionable Shuffle-Exchange Network (PSEN). The proposed algorithm presents that the SSEN can be partitioned into independent sub-networks without additional links for N $\leq$ 8. Additional links are needed in order to partition an SSEN, but only when N $\geq$ 16. The running time of the algorithm SSEN_to_PSEN is $\theta$(NlogN). By comparing with a hypercube network, the PSEN is less expensive than a hypercube network even when some additional links are added. By partitioning, a large PSEN in a massively parallel machine can compute various problems for multiple users simultaneously, thereby the processing efficiency of the machine is improved.

• Tunnel and Underground Space
• /
• v.11 no.4
• /
• pp.362-367
• /
• 2001

The stiff top layer in a soil profile, which can happen in winter, may change the isolation effect of the wave barrier. The research scope of this paper is the investigation of the propagation of surface waves in layered soil with a stiff layer on its top, and the isolation effect of the solid stiff wave barrier. The investigations have been performed numerically by the Boundary-Element Method as a two-dimensional problem. A strip foundation vibrated harmonically in vertical direction was considered as the vibration source. Three soil profiles, a homogeneous half-space, two profiles with different thickness of stiff top layer, with two different types of wave barriers were investigated. The profiles with a stiff top layer show considerable reductions of the amplitude of the vibration in comparison to the homogeneous soil profile. The layered soil profiles with a stiff top layer do not show wave propagation velocities as high as they are expected from the material properties. Furthermore the vibration amplitudes in a frozen soil are much smaller with distance than in a non-frozen soil.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.1
• /
• pp.9-19
• /
• 2017

In this study, stator shroud injection in a single-stage transonic axial compressor is proposed. A parametric study of the effect of stator shroud injection on aerodynamic performances was conducted using the three-dimensional Reynolds-averaged Navier-Stokes equations. The curvature, length, width, and circumferential angle of the stator shroud injector and the air injection mass flow rate were selected as the test parameters. The results of the parametric study show that the aerodynamic performances of the single-stage transonic axial compressor were improved by stator shroud injection. The aerodynamic performances were the most sensitive to the injection mass flow rate. Further, the total pressure ratio and adiabatic efficiency were the maximum when the ratio of circumferential angle was 10％.

• Journal of the Korean Vacuum Society
• /
• v.19 no.2
• /
• pp.96-104
• /
• 2010

We suggest here a cost-effective replica fabrication method for transparent and hard molds for imprinting lithography such as NIL and S-FIL. The process starts with the use of a replica hard mold from a master, using a polymer copy as a carrier. The polymer copy as a carrier was treated by soluble process for forming anti-adhesion layer. Duplicated hard molds can eliminate direct contact between a hard master and a patterned polymer on a substrate and the generated contamination of a master during the imprinting process. The replica hard mold exhibits the glass-like properties introduced here, such as transparency and hardness, make it appropriate for nanoimprint lithography and step-and-flash imprint lithography.

• Journal of Chest Surgery
• /
• v.36 no.4
• /
• pp.267-272
• /
• 2003

Background: Common treatment modalities for tracheal stenosis include conservative methods such as repeated balloon dilatation, removal of obstructive material through bronchoscopy and T-tube insertion as well as operative treatment methods. Recent advances in surgical approaches through tracheal resection and end-to-end anastomosis have been reported to give better functional and anatomical results. Material and Method: Between March 1990 and July 2002, 41 patients who received tracheal resection and end-to-end anastomosis at Asan Medical Center, University of Ulsan were studied retrospectively. Result: The causes for tracheal resection and end-to-end anastomosis included 26 cases of postintubation stenosis, 10 cases of primary tracheal tumors (3 benign, 7 malignant), 1 case of endobronchial tuberculosis, 2 cases of traumatic rupture, and 2 cases of tracheal invasion of a thyroid cancer, Of the 41 patients who received tracheal resection and reconstruction, 29 received tracheal resection and end-to-end anastomosis, and 12 received laryngotracheal anastomosis with cricoid or thyroid cartilage resection. Four of these patients received supralaryngeal release. The average length of the resected trachea was $3.6{\pm}1.0$cm. Of the 41 patients who received tracheal resection and end-to-end anastomosis, 30 (73.2%) experienced no postoperative complications, and 8 (19.5%) experienced granulation tissue growth and/or minor infections which improved after conservative management. Good or satisfactory results were therefore achieved in 92.7%. Complications included repeated granulation tissue growth in 7, wound infection in 2, anastomotic site dehiscence in 2, restenosis resulting in dyspnea on exertion in 1, and repeated postoperative aspiration requiring retracheostomy in 1. There was no early postoperative mortality. There were 3 cases of hospital death. Conclusion: In cases of proper length of tracheal lesion, excellent results were obtained after tracheal resection and end-to-end anastomosis. But, granulation tissue growth is so serious complication, it is necessary for continuous study and efforts to prevent it.

• Progress in Medical Physics
• /
• v.18 no.3
• /
• pp.161-166
• /
• 2007

A model theory of passive-targeted drug delivery in sphere-shaped solid tumors is introduced on the basis of Fick's law of diffusion, with appropriate boundary and initial conditions. For a uniform initial concentration inside the tumor, the concentration is obtained as a function of time and radial position. The concentration is shown to approach the equilibrium distribution as the time elapses, as is expected by the Gedanken Experiment. The time-evolution rate is found to be determined by the diffusion coefficient of the drug in the tissue, the size of the tumor, the volume of the drug-injected region, and the concentration gradient at the boundary.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1987.05a
• /
• pp.13.1-13
• /
• 1987

저자들은 1984년 12월 17일부터 1987년 2월 26일까지 경희대학교 의과대학 부속병원 이비인후과 및 흉부외과에서 경험한 9례의 기관협착증환자를 대상으로 임상적 고찰을 하여 다음과 같은 결과를 얻었다. 1) 연령 및 성별분포는 여자 3례, 남자 6례이었고, 10세이하 3례, 10대 2례, 20대 2례, 40대 이상이 2례 이었다. 2) 원인은 지속적 기관내삽입관에 의한 경우가 4례이었고 1례는 선천성 혈관기형인 double aortic arch에 의해 기관이 눌리어 기도협착증상이 있었던 경우이었다. 상기관절개술에 의한 경우가 2례, 경부외상 1례, 기관내 종양 2례이었다. 3) 협착부위의 길이는 1.5cm에서 2cm까지가 4례로 가장 많았고 3cm이내가 2례, 4cm이내 1례, 6cm이내 1례이었다. 4) 치료는 보존적인 방법으로 내시경하에서 육아조직 및 반흔조직을 laser를 이용하여 제거한 후 silastic stent 혹은 Montgomery T-tube 삽입후 4주에서 6주후 제거하여 치료한 경우가 2례이었고 협착부위절제 및 단단문합술을 시행한 경우가 6례이었다. 1례에서는 aortic arch division을 시행하였다. 5) 예후는 9례중 단단문합술을 시행한 6례 그리고 보존적 방법으로 laser를 이용한 육아조직의 제거 및 지지물삽입을 시행한 3례에서 모두 현재까지 재발은 보이지 않고 있다. 6) 기관협착의 길이가 1.5cm에서 4cm까지의 경우에는 supralaryngeal release procedure없이 단단문합술을 시행하였고 협착길이가 6cm인 1례에서는 supralaryngeal release를 하여 tension없이 문합술을 시행할 수 있었다.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.210.3-211
• /
• 2003

흑미가루를 0%, 10%, 15％, 20%, 25％로 첨가량을 다르게 하여 제조한 흑미를 첨가한 인절미의 관능적 특성, 수분 함량, 색도, 기계적인 특성을 비교 검토하였다. 관능검사에서 전체적인 조화도는 흑미가루 15% 첨가군이 가장 높게 나타났고, 흑미가루 10% 첨가군이 그 다음으로 높게 나타난 것으로 보아 유색인절미로서 흑미가루의 첨가량이 15%가 이하일 때 가장 적당한 것을 알 수 있었다. 단단한 정도, 조직의 거친 정도, 씹힘성, 향미는 흑미가루의 첨가량이 증가할수록 높은 점수를 나타내었다. 수분함량은 각 시료간의 큰 차이는 없었으나 흑미가루 첨가량이 증가할수록 수분 보유량이 증가하는 것은 흑미의 식이섬유소 때문으로 추정한다. 색도는 흑미가루의 첨가량이 증가할수록 명도는 낮아지고, 적색도와 청색도가 증가함을 알았다. 기계적 검사에서는 경도, 씹힘성, 껌성은 흑미가루의 첨가량이 증가할수록 그 값이 높아졌고, 응집성과 탄력성은 모든 시료가 거의 비슷한 수치를 나타내었으며, 부착성은 흑미가루의 첨가량이 증가할수록 그 값이 높아졌다. 즉, 흑미가루 비첨가군에 비해 흑미가루 첨가량이 증가할수록 더 단단해지고, 탄력성이 감소하였음을 알 수 있었다. 관능적 특성에서 단단한 정도, 조지의 거친정도, 씹힘성은 기계적인 특성에서 경도, 응집성, 씹힘성과 비교해 볼 수 있는데, 두 가지의 검사의 결과 모두 흑미가루의 첨가량이 증가할수록 그 값이 커져 그 결과가 일치함을 알 수 있었다.

• Journal of Biomedical Engineering Research
• /
• v.19 no.4
• /
• pp.417-422
• /
• 1998

The study was explored socket pressure distributions on a trans-femoral amputee with a suction socket in static and dynamic situations. Even when the amputee stood in the anatomically neutral position, significant pressure concentrations were observed in the lateral, medial, and posterior planes of the socket. During free level walking, a significant shifting pattern of pressure concentration areas was observed. High socket pressure was observed in the lateral, medial-anterior and posterior walls during mid-stance or push-off period. Socket pressure measurement will be one of the good tool to determine the optimal socket-limb interface.