• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.8
• /
• pp.933-945
• /
• 2011

This research proposes a pattern design method for 24 pleated skirts in order to develop an automatic draft program for pleated skirts that will enhance fit and enable mass production. The research method and results are outlined as follow. 1. Three-dimensional body measurements were conducted on 30 randomly selected women in their 20s. By using 34 body measurement items and 6 types of calculations among the items, the items required in the designing of an original pleated skirt were extracted. They were then interpreted through correlation analysis, variance analysis, a t-test, linear regression analysis and multiple regression analysis. 2. An extra amount was added to the waist measurement and external capsule measurement according to the number of times the pleats coincided and the thickness of the fabric by the degree of polymerization of the horizontal cross section (the test of this research: 0.518mm). The extra amount of waist measurement was 3.6cm while the hip measurement was 4.3cm larger than the hip measurement combined with the external capsule measurement and the extra amount. 3. Based on the ${\pm}$standard deviation/2 as the average of the difference between the external capsule measurement and waist measurement, the subjects were classified into 3 somatotypes. Somatotype 1 presented an average total length of waist darts of 23.6cm while that of somatotype 2 was 26.2cm and that of somatotype 3 was 30.2cm. It has been confirmed that there is a significant difference among somatotypes in the total length of waist darts from the front center to the front side and the total length of waist darts from the side to the back center in terms of the average amount of waist darts for every 12 parts on the WL.

• The Research Journal of the Costume Culture
• /
• v.12 no.3
• /
• pp.392-406
• /
• 2004

The purpose of this study is to recognize of the size conditions of ready to wear skirts and analyze the patterns of them so that some educational patterns can be complemented. For this purpose, the investigation of the size conditions was focused on the body sizes and products sizes of the care labels. The patterns of them produced through CAD have been classified into 24 items for the effective and practical analysis. Thus, 9 brands were selected and the basic skirts marketed in 2002 spring were analyzed. The results were as follows. 1. Designs of the backs of the basic skirts produced by 9 brands have the similar designs with two darts. Regarding the designs of the front, 6 brands of them have the designs with no darts, 3 of them have the one with two darts. Designs of waists are composed of low waists and round belts. 2. Regarding the waist circumference as the basic composing elements of skirts, 55.6% of the patterns have the composition of the styles with larger front than the back but 33.3% of them have the same front as back. As to the hips, 77.8% of them have the composition of the patterns with larger back than the front. As for the comparison of waist lines, 55.6% of them have lower front lines than the back lines. 3. Regarding darts placement, it was moved to the side lines from the middle of 1/2 of waist lines, dart intake was 1.8-2.4㎝, the length of the front darts was 7.8-9.5㎝, and the length of the back darts 8.4-11.1㎝ 4. The results of wearing-tests by the sensory evaluation, it showed that almost all the items of the results were satisfactory.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.10
• /
• pp.185-193
• /
• 2022

This study attempted to compare and analyze the commercially available multi-use patterns to develop mask patterns suitable for the face types of adult women. Through this, it was intended to provide necessary data to mask pattern development and products. As a results of comparing the dimensions and shapes of commercial multi-use mask patterns, there was a significant difference in dimensions even though it was a L-size mask manufactured for adults. As a result of the appearance evaluation of the virtual outfit, there were significant differences by design in the vertical of the center front line, the cover and space of the mask, the height of the nose, and the lower part of the mask. The side also showed significant differences in the covering of the side of the face, the space of the side, and the width and length of the string. As a result of the appearance evaluation, Mask 4 received the best evaluation. The shape of the mask pattern had a large dart in the lower part of the nose so that it can cover the three-dimensional shape of the face, but there was a difference in the degree and angle of the curve depending on the mask. Although the upper part of the mask, the lower part of the mask, and the cheek part are in close contact, the evaluation of the mask pattern, which has room in the nose and mouth, was high. It is thought that the mask pattern should be set according to the upper length, lower length, and nose height of the mask through analysis of the face shape and dimensions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.266-275
• /
• 2009

Variations of individual hip shapes are a major obstacle in pattern making for fitness. The drafting method is used for pattern making in today's apparel industry. Whilst catering to a limited number of information such as waist and hip sizes, this method does not cater to variations in hip shape. This paper describes the analysis of hip shapes using 3D body model and tries to make sure the relationship between hip shape and pattern by calculating hip angle and dart amount. We achieved results in analyzing various hip shapes by extracting hip angle. Moreover, various hip shapes can be divided into three types(A, B and C) by the hip angle value($K_{sh}-K_{wsh}$). When we use computerized draping method to make a personalized pattern for a tigth skirt, we easily create complex dart lines automatically. Therefore we achieve the result of individual dart amount such as distance between dart lines and dart areas. C type of hip shape had short dart length, long distance between dart lines and a large amount of dart area. On the other hand, A type had long dart length, short distance between dart lines and small amount of dart area. B type had long length and long distance between dart lines and large amount of dart area. In traditional pattern making, distance between dart lines is usually proportional to amount of dart area because of similarity in dart line shape. In our pattern, there is no proportional relationship between dart line distance and dart area. This means that variations in hip shapes result in a wide variety of dart line curvature resulting in a wide range of dart area. By ensuring an accurate relationship between hip shape and pattern, it is possible to make patterns which result in clothing that not only fits well, but also exhibits other desirable properties.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.11
• /
• pp.167-178
• /
• 2020

This study attempted to find out the difference in the patterns of jeogori between commercially available Shinhanbok brands by comparing and analyzing the patterns of the changing Shinhanbok jeogori in consideration of material characteristics, fit, and fastening. After purchasing and disassembling 6 products, analysis was conducted with the disassembly pattern. As a result of analyzing the shape of the jeogori, the 1st, 3rd and 6th brands showed no darts. In the case of the 5th brand, the three-dimensional effect of the human body was expressed with a princess line. As a result of the appearance evaluation, the 5 brands were evaluated as the highest in most items except for the space of the front width and the group wrinkles of back sleeve armhole, and the appearance was analyzed to be the best. As a result of evaluating the clothing pressure, it was analyzed that the chest circumference of the first brand was smaller than that of the other brands, and the shoulder width and shoulder length were also shorter, and pulling occurred even after wearing. As the demand for new hanbok increases, it is believed that it is necessary to establish a size system for ready-made clothes.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.143-154
• /
• 2020

In this study, four types of bodice patterns of elderly males in their 70s and 80s were made, and appearance evaluation was conducted through 3D simulation. For objective evaluation, airgap, cross section, color distribution, etc. were analyzed to compare differences between patterns. The pattern shape of bodice for elderly males was a pattern without darts except for the L pattern. As a result of appearance evaluation for 3D simulation, the elderly males' pattern was found to have a significant difference among the patterns on the front, side, and back items, and the H pattern was analyzed as the best pattern in all items except the armhole shape on the side. As a result of evaluating the airgap, color distribution, and cross-section, the most suitable pattern for the elderly male's body type was analyzed as the H pattern. Based on the H pattern, it is thought that the development of a pattern suitable for the upper body shape of elderly male should be made.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.3
• /
• pp.533-540
• /
• 2019

This study investigated the effect of extracorporeal shock wave therapy on nerve regeneration in nerve injured rats. In this study, we used 30 male Sprague-Dawley rats weighing 230-280g and 6 weeks old. Study groups were divided into two groups using a random sampling method: experimental group (n=15) treated with extracorporeal shock wave after sciatic nerve injury and control group (n=15) treated without extracorporeal shock wave after sciatic nerve injury. In this study, extracorporeal shock wave therapy equipment (OPTIMUS, SALUS TALENT 3, Korea) was used to apply extracorporeal shock wave therapy and applied to the sciatic nerve crush area of the right hind limb using low intensity. We measured the stance time and stride distance of the affected side using dartfish software. There was a statistically significant difference in the change of stance time and stride distance of the affected side between the experimental group using extracorporeal shock wave therapy and the control group without extracorporeal shock wave treatment. In conclusion, extracorporeal shock wave therapy has a positive effect on nerve regeneration.