• Korean Journal of Optics and Photonics
• /
• v.35 no.1
• /
• pp.24-29
• /
• 2024

We propose a hyperbolic metastructure based on a nanopatterned metal (Ag)-dielectric (PDMS) multilayer and report on its performance in an infrared (IR) cut-off filter for imaging devices. By optimizing the size of the square-shaped Ag nanopattern and the thickness of PDMS surrounding the Ag nanopattern, the proposed IR cut-off filter blocks 99% of light in the 0.70-1.01 ㎛ wavelength band while maintaining a high transmittance of over 94% in the visible region. Here, the cut-off wavelength band starts at a region above the epsilon-near-zero wavelength of the hyperbolic metastructure and ends at the point where plasmonic absorption appears strongly. It is observed that transmittance in the wavelength region longer than the IR cut-off band increases again due to plasmonic coupling among horizontally adjacent Ag nanopatterns. This metastructure can improve the performance of IR-blocking filters as well as allow it to be manufactured ultra-thin, which is applicable to various planar optical elements and integrated optical components.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2179-2183
• /
• 2008

지금까지 분포형 모형 개발에 대한 많은 노력이 있음에도 불구하고 여러 제약사항들에 의해 잠재력을 보여주는 정도로 활용되어 왔으나, 최근 급속도로 발전하는 컴퓨터의 계산능력, DEM 등 디지털정보의 구축이 진행되어 오고 있고, GIS 및 인공위성 영상기법의 발달로 공간적인 비균질성을 고려하여 유출과정에서 운동역학적인 이론을 기반으로 물의 흐름을 수리학적으로 추적해 나가는 물리적기반의 분포형 유출모형의 활용도가 높아지고 있다. 본 모형개발에 있어 이론적 배경이 된 모형은 1998년부터 일본 교토대학 방재연구소 코지리 연구실에서 개발 중인 Hydro-BEAM으로 유역 물순환의 건전성을 평가하기 위하여 장기간의 유역 내 유량, 수질을 시계열 및 공간적으로 파악하여 유역의 영향평가를 위해 개발된 물리적 기반의 격자구조를 가진 분포형 장기유출 모형이다. 유출량 계산은 유역내 수평 유출량산정 모듈로서 평면 분포형의 격자형을, 연직 분포형으로는 $A{\sim}B$층의 수평유출량은 하천으로 유입하고, C층은 하천유량에 영향을 미치지 않는 지하수층으로 가정하는 다층모형을 이용해서 A층, 지표 및 하도흐름은 운동파 법(kinematic wave)으로, $B{\sim}C$층의 유출량은 선형저류법으로 계산하는 모형이다. 본 연구에서는 격자흐름방향을 4방향에서 8방향으로 개선하였고, 모형의 각종 수문매개변수들을 GIS와 연계하여 직접 입력할 수 있도록 하였으며, 물리적기반의 침투과정을 모의할 수 있도록 Green & Ampt모듈을 추가하고, 향후 레이더 강우 및 수치예보강우의 홍수유출예측을 염두에 두고 격자강우량을 활용할 수 있도록 하는 등 홍수유출해석을 위한 분포형 강우-유출모형으로 개선 하였고, 이를 남강댐유역에 적용해 봄으로써 모형의 적용성을 검토해 보고자 하였다. 홍수기동안의 지표흐름과 지표하 흐름의 시간적 변화와 공간적 분포를 모의할 수 있었으며, 전처리과정으로서 ArcGIS 혹은 ArcView등의 GIS 프로그램을 이용하여 모형에 필요한 ASCII형태의 입력 매개 변수 자료들을 가공하였다. 또한 후처리과정으로서 모형의 수행결과인 유역내의 유출량 분포 등을 GIS상에서 나타낼 수 있도록 ASCII형태로 출력하도록 구성하였다. 남강댐유역을 대상으로 유역을 500m의 정방형 격자로 분할하고 수계망을 통하여 유역 출구까지 운동파이론에 의해 추적 계산하였으며, 수문곡선 비교결과 재현성 높은 결과를 보여주었다. 모형의 정확성 및 실용성에 대한 보다 정확한 평가를 위해서는 향후 다양한 강우 사상 혹은 다양한 크기의 유역에 대한 유출량의 재현성 및 매개변수 등에 검증이 이루어져야 할 것이다.

• Applied Microscopy
• /
• v.30 no.3
• /
• pp.295-301
• /
• 2000

Five kinds of sensory cells, called A1-, A2-, B-, C-, and D-type cell, respectively, are observed in the epithelial tissue of suker's infundibulum of Cephalopoda, Octopus minor. The A1-type cells lie side by with the B-type cell in the epithelium of sucker's infundibulum. In the A1-type, the nucleus shapes irregularly and the karyolymph appears dark due to its high electron density. The cytoplasm is filled with many vacuoles of various sizes ($0.04\sim0.4{\mu}m$ in diameter), which move to the apical portion of the cell to be secreted via glycocalyx. The A2-type cells are mainly found at the basal portion of the epithelium. The shape of its nucleus is similar to that in the A1-type cell, and the cytoplasm, filiform or in reticular form, shows high electron density. The B-type cell contains an ovoid nucleus and the cytoplasm where lots of vacuoles which resemble the endoplasmic reticulum and electron-dense round granules of various sizes $(0.25\sim0.6{\mu}m)$ are found. The vacuoles and granules are secreted into the free surface via glycocalyx. The C- and D-type cells in simple or stratified layer are observed at the folded portion of the sucker's epithelium. The C-type cell contains a low electron-dense elliptical nucleus, while the D-type cell has an irregular nucleus where beterochromatin is well developed.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2061-2066
• /
• 2007

Recently, ultra-lightweight materials with open, periodic cell structures take much attention owing to its potential for multi-functionality such as load bearing, thermal dissipation, and actuation. This paper presents experimental results on the hydraulic and heat transfer characteristics for the Wire-woven Bulk Kagome(WBK) composed of aluminum 1100 wires. The overall pressure drop and heat transfer of the WBK specimen have been experimentally investigated under forced air convection condition. The pressure loss and heat transfer performance of the aluminum WBK are compared with other heat dissipation media. It was shown that heat transfer depended on relative density and surface area density. Comparison with metal foams and other heat dissipation media such as packed beds, lattice frame materials, louvered fins, and other materials suggests that the aluminum WBK competes favorably with the best available heat dissipation media in heat transfer performance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.181.2-181.2
• /
• 2016

OLED 소자는 발광 방향에 따라 Bottom Emission 방식과 Top Emission 방식으로 나뉜다. 이 중 대면적 OLED TV 적용에 개구율이 더 높은 Top Emission방식을 선호하는 추세이다. 높은 개구율을 가진 Top Emission OLED소자를 위해서는 투명하고 전도성이 높은 캐소드가 중요하다. 본 연구에서는 Themal Evaporation 시스템을 이용하여 증착한 $SnO_2/Ag-Pd-Cu(APC)/SnO_2$ hybrid 전극의 특성을 연구하고 Oxide/Metal/Oxide(OMO) hybrid 박막의 bending mechanism을 제시하였다. base pressure는 $1{\times}10^{-6}Torr$로 고정하고 $SnO_2$ 박막은 0.34A / 0.32V, APC 박막은 0.46A / 0.40V의 power로 성막하였다. APC와 $SnO_2$의 두께를 변수로 OMO 전극을 제작하였고 그 전기적, 광학적 특성을 Hall measurement, UV/Visible spectroscopy을 이용하여 분석하고 Figure of merit 값을 바탕으로 최적 두께를 설정하였다. UPS(Ultraviolet Photoelectron Spectroscopy) 분석으로 $SnO_2/APC/SnO_2$ 전극의 일함수을 통해 투명 cathode로 쓰였을 때 $SnO_2$ 층이 buffer layer역할을 함을 확인하였다. XPS(X-ray photoelectron spectroscopy)를 이용하여 정성분석과 정량분석을 하였고 OMO hybrid 전극의 bending mechanism 연구를 위해 다양한 bending test (Inner/Outer dynamic fatigue test, twisting test, rolling test)를 진행하였다. 물리적 힘이 가해진 OMO hybrid 전극의 표면과 구조는 FE-SEM(Field Emission Scanning Electron Microscope) 분석을 통해서 확인할 수 있었다.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.61-66
• /
• 2001

$WO_3$ films were multicoated on the microscope slide glass and ITO-coated glass using a tungsten alkoxide type solution by the sol-gel deposition process. The effect of dipping and processing parameters on the structure, optical and electrochemical properties of the film were also investigated. Coating using alkoxide solution was very uniformed for low dipping speed of 0.005 m/s, but thickness variations across the sample became apparent for dipping speeds greater than 0.007 m/s. Electrochemical coloration experiments showed that films fired at lower temperatures color more easily than film fired to > $200^{\circ}C$. Rutherford backscattering spectroscopy studies revealed that $K^+$ ions were uniformly distributed throughout the $WO_3$layer in the colored sample.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.1
• /
• pp.15-22
• /
• 2008

Recently, ultra-lightweight materials with open, periodic cell structures take much attention owing to its potential for multi-functionality such as load bearing, thermal dissipation, and actuation. This paper presents experimental results on the fluid flow and heat transfer characteristics for the Wire-woven Bulk Kagome (WBK) composed of aluminum 1100 wires. The overall pressure drop and heat transfer of the WBK specimen was experimentally investigated under forced air convection condition. The pressure loss and heat transfer performance of the aluminum WBK were compared with other heat dissipation media. It was shown that heat transfer characteristics depended on relative density and surface area density. Comparison with metal foams and other heat dissipation media such as packed beds, lattice frame materials, louvered fins, and others suggests that the aluminum WBK competes favorably with the best available heat dissipation media in heat transfer performance.

• Applied Microscopy
• /
• v.4 no.1
• /
• pp.25-33
• /
• 1974

The origin and the function of cytolysomes were studied in the mesophyll cells and the root-tip cells of Glycine max Merr. and Zea mays L. fixed by paraformaldehyde-glutaraldehyde-$OsO_4$. The cytolysome-like structures were found of three main types of configurations: multivesicular, myelin like (multilamllar) and multitubular. More complex and mixed ones were also observed. The origin of these structures seems to be initiated by invaginations or in holdings of the plasmalemma into the cell interior, and that by aggregation and convolution of endoplasmic reticulum in the cytoplasm. Invagination of the plasmalemma were found of two main types of configurations: concentric whorls of lamellar and multivesicular. The structures were also observed within vacuoles and cytoplasm. Since the structurers are widely distributed in the cells and are greatly varied in sizes and shapes. These structures originate from the plasmalemma and the cytoplasm subsequently protrudes into the vacuole, and that seem to play an important role on the formation of the autophagic vacuoles. The possible function and fate of these structures are discussed.

• Elastomers and Composites
• /
• v.46 no.2
• /
• pp.94-101
• /
• 2011

The conventional radiation barriers may show some disadvantages such as heavy weight and possibility of poisoning human bodies because they are composed of lead plates or resin plates containing large amounts of lead powders. Another disadvantage may be direct penetration of radiation through small pin holes. In this article, technologies of multi-layered polymer barriers against radiation, which has been extensively focused recently, will be introduced. A new concept of radiation protection as well as improving endurance with employing nano-layered inorganic particles is introduced.

• Geotechnical Engineering
• /
• v.3 no.1
• /
• pp.53-64
• /
• 1987

Dynaflect is known as a very effective equipment for the structural evaluation and rehabilitation of Pavements. It is increasingly used in the design, construction and maintenance of the various pavement structures. In this study, two-layered asphalt concrete pavements with the various moduli and thicknesses are selected as the analytical models. The deflections on the surface corresponding to sensor positions of Dynaflect are analyzed utilizing the multi-layered elastic computer program. From the study of the characteristics of spreadability (SPR), it is found that the SPRs are unique when the moduli ratio of pavements EIIE2 are identical. It is also found that the SPR has a linear relationship with the logarithm of moduli ratio ElIE2 in the range of 1.0 to 50. The regression equation to predict the moduli ratio ElyE2 from the SPR and the pavement taickness h is proposed. A series of charts to estimate the elastic moduli of two-layered asphalt concrete pavement system are also developed.