• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.163-164
• /
• 2014

This study is conducted for prevent spread of penetration water and water leakage through non-woven fabric between PVC sheet and PVC sheet in the PVC composite waterproofing sheet of a multi-layer structure. For this, carry out absorption amount test to confirm spread resistance performance after manufacturing PVC composite waterproofing sheet of a multi-layer structure using water-repellency processed non-woven fabric. As a result of test, weight of water-repellency processed non-woven fabric increased to 1.178g, Compared with beginning and there are not penetration water.

• Journal of the Korean Magnetics Society
• /
• v.2 no.2
• /
• pp.125-131
• /
• 1992

기판회전 테이블이 부착된 DC, RF-magnetron sputtering 장치로 유리기판 위에 제작한 1000 .angs. 정도의 8.8 .angs. Tb/X .angs. Fe (X=5.4~11.0) 다층박막에 관하여 시료진동형 자 기계와 타원편광 분석장치를 사용하여 자화, 수직자기이방성, kerr 회전각의 Fe층 두께와 열처리 온도 의존성이 연구되었다. Fe층 두께가 7.8 .angs. 기점으로하여 자화용이축의 전이가 나타나기 시작하여 6.4 .angs. 일때 수직자기이방성을 나타낸다. 실험치로부터 계산한 Fe와 Tb층의 경계면 수직이방성 에너지 $K_{s}$ = -0.38 erg/$cm^{2}$이고, Fe층만의 체적수직이방성 에너지 $K_{v}$ = -8.50 * $10^{5}$ erg/$cm^{3}$이다. Polar Kerr 회전각은 Fe층 두께 7.8 .angs. 에서 그대값 2 .THETA. $_{k}$ = 1.22 .deg. 를 갖는다.다.다.다.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1410-1412
• /
• 2003

PTC 자기발열기판을 사용해서 저전력 방폭형 CO센서를 제작하고 그 특성을 고찰하였다. CO가스센서의 감지특성을 향상시키기 위하여 Pt가 island 형상을 갖는 다층 Pt/$SnO_2$ 박막구조를 도입하였으며, 이와 같은 구조는 Pt/$SnO_2$ 위에 다시 $SnO_2$ 및 Pt cluster 층들을 연속적으로 증착함으로서 제작되었다. 200ppm의 CO가스농도에서 측정된 다층 $Pt/SnO_2$박막 센서의 감도는 1.72($R_{air}/R_{CO}$)로, 단충 Pt/$SnO_2$ 박막 센서의 최대감도(1.23)보다 훨씬 더 높았다 이것은 Pt와 $SnO_2$사이의 계면적 증대에 기인하는 것으로 생각된다. 제작된 Pt/$SnO_2$ 가스센서의 평균 소비전력은 38.5mW이며, 측정농도범위($30{\sim}1,000ppm$)에서 매우 양호한 감지특성을 나타내었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.1
• /
• pp.33-36
• /
• 2000

Auto DOME-reversing system had been installed in a vacuum coating chamber which decreased the coating time, the electric energy spending and the contamination by rotating and revilving substance. Auto multi coating with dual electron beam was accomplished and effective coating area was increased. The coating duration was decreased with 30%. the production efficiency were increased with 50%. Also the surface conductivity the coated film uniformity and anti-reflection capablity were also improved.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.130-131
• /
• 2019

As part of recent low-energy policies, thermal insulation standards for buildings are being tightened every year. In addition, the conventional styrofoam insulating material has a problem that the thickness of the heat insulating material to achieve a standard heat permeability is rapidly increased. Due to the thick insulation, there is a high risk of spreading vulnerable structures such as fire due to lack of space between buildings. On the other hand, the method of using the insulation as a formwork is known to be excellent cost saving effect through the reduction of the formwork usage and the simplification of the external insulation work. In order to solve this problem, this study aims to fabricate a multi-layered insulator that combines high-performance phenolic foam insulation and styrofoam insulation and evaluate the deflection characteristics for use as formwork.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.11a
• /
• pp.202-205
• /
• 2009

체력이나 건강을 위한 트레이닝이나 심장 질환자의 생체신호 모니터링을 위해 다양하게 사용되는 심전도는 현재 여러가지 장비형태로 사용되고 있다. 최근에는 착용자가 인식하지 않고 손쉽고 편안한 방법으로 측정하거나 모니터링 할 수 있는 형태의 생체신호 모니터링 의복에 관한 연구가 많이 진행되고 있다. 본 연구에서는 20대 남성의 체표면 분석을 통해 심전도 검출이 가능한 일체형 의복을 설계하고 제작된 시제품의 착의평가를 진행하였다. 심전도 측정이 가장 효과적인 흉부 부분을 중심으로 심전도 데이터 추출 정확성을 위해 다층구조로 센서를 설계하고, 흉부의 움직임을 최소화하여 노이즈를 감소할 수 있는 디자인을 제안한 결과, 심전도 데이터 추출 정확성 및 편의성은 향상되고 노이즈는 감소하는 결과를 도출하였다.

• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.50-57
• /
• 2022

Ti-In-Zn-O (TIZO)/Ag/TIZO multilayer transparent electrodes were prepared on glass substrates at room temperature using RF/DC magnetron sputtering. Obtained multilayer structure comprising TIZO/Ag/TIZO (10 nm/10 nm/40 nm) with the total thickness of 60 nm showed a transmittance of 86.5% at 650 nm and a sheet resistance of 8.1 Ω/□. The multilayer films were expected to be applicable for use in energy-saving smart window based on polymer-dispersed liquid crystal (PDLC) because of their transmittance properties to effectively block infrared rays (heat rays). We investigated the effects of the content ratio of prepolymer, the thickness of the PDLC coating layer, and the ultraviolet (UV) light intensity on electro-optical properties, and the surface morphology of polyester acrylate-based PDLC systems using new TIZO/Ag/TIZO transparent conducting electrodes. A PDLC cell with a thickness of 15 ㎛ PDLC layer photocured at an UV intensity of 1.5 mW/cm² exhibited good driving voltage, favorable on-state transmittance, and excellent off-haze. The LC droplets formed on the surface of the polymer matrix of the PDLC composite had a size range of 1 to 3 ㎛ capable of efficiently scattering incident light. Also, the PDLC-based smart window manufactured using TIZO/Ag/TIZO multi-layered transparent electrodes in this study exhibited a light brown, which will have an advantage in terms of aesthetics.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.2 s.43
• /
• pp.49-57
• /
• 2007

Au-Sn solder alloy were deposited in multilayer and co-sputtered film by rf-magnetron sputter and the composition control and analysis were studied. For the alloy deposition condition, each components of Au or Sn were deposited separately. On the basis of pure Sn and Au deposition, the deposition condition for Au-Sn solder alloy were set up. As variables, the substrate temperature, the rf-power, and the thickness ratio were used for the optimum composition. For multilayer solder alloy, the roughness and the composition of solder alloy were controlled more accurately at the higher substrate temperature. In contrast, for co-sputtered solder, the substrate temperature influenced little to the composition, but the composition could be controlled easily by rf-power. In addition, the co-sputtered solder film mostly consisted of intermetallic compound, which formed during deposition. The compound were confirmed by XRD. Without flux during bonding of solder alloy film on leadframe, the adhesion strength were measured. The maximum shear stress was $330(N/mm^2)$ for multilayer solder with Au 10wt% and $460(N/mm^2)$ for co-sputtered solder with Au 5wt%.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.157-171
• /
• 2021

The purpose of this study is to assess the smart city for major cities in Korea. The assessment indicators are based on the STIM structure (Service, Technology, Infrastructure, and Management Layer Architecture) of the Multi-Layered Smart City Model. Assessment indicators are established through smart city concepts, case analysis, big data analysis, as well as weighted through expert AHP survey. For the assessment, seven major metropolitan cities are selected, including Seoul, and their data such as KOSIS, KISDISTAT from 2017 to 2019 is utilized for the smart city level assessment. The smart city level results show that the service, technology, infrastructure, and management levels were relatively high in Seoul and Incheon, which are metropolitan areas. Whereas, Busan, Daegu, and Ulsan, the Gyeongsang provinces are relatively moderate, while Daejeon and Gwangju, the South Chungcheong region and the Jeolla provinces, were relatively low. The overall STIM ranking shows a similar pattern, as the Seoul metropolitan area smart city level outperforms the rest of the analyzed areas with a large difference. Accordingly, balanced development strategies are needed to reduce gaps in the level of smart cities in South Korea, and respective smart city plans are needed considering the characteristics of each region. This paper will follow the literature review, assessment index establishment, weight analysis of assessment index, major cities assessment and result in analysis, and conclusion.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.4
• /
• pp.215-226
• /
• 2022

Significant efforts have been devoted to developing high-performance composite materials by emulating the structure of biological creatures with superior mechanical characteristics. Nacre has been one of the most sought-after natural structures due to its exceptional fracture toughness compared with the constituent materials. However, the effect of manipulating the nacre-like geometry on the impact performance has not been fully investigated thus far. In this study, composites of randomly manipulated nacreous geometry are numerically developed and the impact performance is analyzed. We develop an algorithm by which the planar area of platelets in the nacre-like design is randomly resized. Thereafter, the numerical models of nonuniform nacre-patterned multi-layer structures are developed and the drop-weight impact simulation is performed. The impact behaviors of the model are evaluated by using the ratio of absorbed energy, the von Mises stress distribution, and the impact force-time curve. Therefore, the effect of the geometric irregularity on the nacre-patterned design is elucidated. This insight can be efficiently utilized in establishing the optimum design of the nacre-patterned structure.