• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.3
• /
• pp.155-163
• /
• 2018

One of the major disadvantages of isogeometric analysis(IGA) is that local refinement is nearly impossible in a conventional manner because of the tensor product nature in NURBS. In this research, we investigate a local refinement scheme for isogeometric analysis, named multi-resolution approach where different resolutions are employed at each subdomain, using h-refinement relation to endow displacement compatibility on an interface of subdomains. Then, we develop shape sensitivity analysis possessing same compatibility condition as in the analysis. Numerical examples are shown to demonstrate the computational efficiency of the method in analysis especially stress concentration problem and accurate sensitivity results which is also compatible on the interface.

• Particle and aerosol research
• /
• v.13 no.3
• /
• pp.111-118
• /
• 2017

Electrohydrodynamic (EHD) printing with the aid of strong electric fields can generate and pattern droplets that are smaller than droplets by other printing technologies. Conventional EHD printing has created two-dimensional (2D) patterns by moving its nozzle or a substrate in X and Y directions. In this study, we aimed to develop an EHD system that can create 2D patterns using a multielectrode array (MEA) without moving a nozzle or substrate. In particular, printing ink mixtures of biodegradable polymers and model dyes was patterned on a thin film made of another biodegradable polymer. Without movement of a nozzle and substrate, stable 2D patterning of minimum $6{\mu}m$ size over a range of about 1 mm away from the nozzle position was achieved by MEA control only. We also demonstrated the possibility of denser 2D pattering of the ink mixtures by moving a target substrate relative to MEA position.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10b
• /
• pp.162-166
• /
• 2007

단일 영상의 시야각 한계를 극복하기 위해 다중 영상으로부터 하나의 파노라마 영상으로 만들 수 있다. 파노라마 영상은 좌우 360도까지의 시야각을 확보할 수 있어서 복잡한 실제 환경을 가상 환경에서의 배경으로 사용하고자 할 경우에 유용하다. 본 논문에서는 가상 환경에서의 배경으로 사용할 수 있는 파노라마 영상 생성 기법을 제안한다. 다중 영상들을 촬영하고 이를 사용하여 하나의 구형 파노라마 영상을 생성한다. 상하 시야각을 180도까지 확보하기 위한 제작 기법을 제시한다. 또한 생성된 구형 파노라마 영상으로부터 3차원 렌더링에 적합한 텍스쳐로의 변환과정을 제시한다 실제 환경을 가상화할 시에 파노라마 배경을 사용하면 조밀한 배경을3차원적으로 모델링하지 않고도 배경을 3차원적으로 표현할 수 있으므로 제안된 기법은 가상현실 응용에 유용하게 사용될 수 있다.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.14-19
• /
• 2007

2차원 웨이블릿이나 3차원 웨이블릿 변환은 주파수 방향으로 나타나는 분광특성을 고려할 수 있는 장점이 있다. 그러나 다중분광 영상에서 3차원 웨이블릿 변환을 이용하여 분류한 연구사례는 발표되거나 보고된 사례가 거의 없다. 따라서 본 연구에서는 기존의 전통적인 분류기법에 의한 처리결과를 제시하고 3차원 웨이블릿 변환 계수와 에너지 변수량들을 이용한 분류 처리결과를 분류 정확도 측면에서 비교하여 분석하였다. 3D 웨이블릿의 경우 공간적인 변화양상과 주파수에 따른 분광정보의 변화 양상을 동시에 알려주는 계수로 표현되기 때문에 본 연구의 처리 기법은 다양한 분광특성을 지니는 객체들이 조밀하고 복합적으로 구성되어 있는 도시지역의 고 해상도 위성영상자료에 효과적으로 적용될 수 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.7
• /
• pp.431-436
• /
• 2014

In this paper, we propose a compressive sensing-based channel quantization feedback mechanism that is appropriate for practical massvie multiple-input multiple-output (MIMO) systems. We assume that the base station (BS) has a compact uniform square array that has a highly correlated channel. To serve multiple users, the BS uses a zero-forcing precoder. Our proposed channel feedback algorithm can reduce the feedback overhead as well as a codebook search complexity. Numerical simulations confirm our analytical results.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.60-67
• /
• 2008

In this paper we consider an application of the method of electromagnetic (EM) migration to the interpretation of a typical marine controlled-source (MCSEM) survey consisting of a set of sea-bottom receivers and a moving electrical bipole transmitter. Three-dimensional interpretation of MCSEM data is a very challenging problem because of the enormous number of computations required in the case of the multi-transmitter and multi-receiver data acquisition systems used in these surveys. At the same time, we demonstrate that the MCSEM surveys with their dense system of transmitters and receivers are extremely well suited for application of the migration method. In order to speed up the computation of the migration field, we apply a fast form of integral equation (IE) solution based on the multigrid quasi-linear (MGQL) approximation which we have developed. The principles of migration imaging formulated in this paper are tested on a typical model of a sea-bottom petroleum reservoir.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1182-1187
• /
• 2006

본 논문은 필립스의 오디오 핑거프린트 추출 방식을 기반으로 기존의 방식이 주파수 영역을 너무 조밀하게 분석하는 특징을 지적하고 개선 방안으로 양자화를 통해 필터 뱅크의 에너지 변화율을 오디오 핑거프린트 추출시 반영하는 방법을 제안하였다. 또한 제안된 알고리즘을 사용하여 PDA 로 실제 어플리케이션을 구현하는 것을 목적으로 하고 있다. 제안된 방식은 필립스 방식과 동일한 메모리 크기를 유지하기 위하여 필터 뱅크의 개수를 33 개에서 17 개로 줄이고 필터 뱅크의 변화량을 2 비트로 할당하는 방식을 사용하였다. 변화량을 비트에 할당하기 위하여 음악 데이터 베이스로부터 추출된 각 밴드의 pmf를 통해 음악의 고유성을 최대로 증진 시킬 수 있는 임계치를 찾아내고 이것을 바탕으로 필터 뱅크의 변화량을 2 비트로 할당하였다. 이 같이 추출된 오디오 핑거프린트를 기반으로 PDA 와 음악 검색기 서버와의 통신을 이용하여 사용자가 요청한 쿼리 음악에 관련된 정보를 제공하는 시스템을 구현했다. 제안된 방식은 다양한 주변 잡음 환경에서 평가되어 기존의 필립스 방식 보다 성능 향상 물론 검색 속도 또한 개선되는 특징을 확인할 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.1
• /
• pp.71-79
• /
• 2014

A parallelization of the bi-conjugate gradient solver for the pressure equation of the CUPID (component unstructured program for interfacial dynamics) code, which was developed for analyzing the components of a pressurized water-cooled reactor, was studied in a symmetric multi-processing system. The parallel performance was investigated for three typical parallel programming models (MPI, OpenMP, Hybrid) by solving incompressible backward-facing step flow at various grid resolutions. It was confirmed that parallel performance was low when problem size was small or the memory requirement for each thread was considerably higher than the cache memory. Furthermore, it was shown that MPI was better than OpenMP regardless of the problem size, and Hybrid was the best when the number of threads was relatively small.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.952-962
• /
• 2015

In this study, multilayered rings with a large outer diameter have been developed using a hot ring rolling process. The ring rolling process has been analyzed by rigid plastic finite element analyses (FEA) using the AFDEX2D and AFDEX3D/HEXA/RING simulators, where the finite element meshes received severe plastic deformation are remeshed into a fine mesh-size using a dual-mesh system. According to the simulated results, the design variables of the multilayered rings were determined and real tests were conducted to check the validity of the simulation results. By adopting the hot ring rolling process, the input weight of raw materials was reduced by 40% against the conventional hot forging process and that the recovery rate was increased by 24%. The measurement of the averaged roundness was satisfied within 0.5 mm for both the inner and outer diameters. Moreover, the hot ring rolling processes yielded 1.49 Cpk for the outer-diameter and 0.84 Cpk 0.84 for the inner-diameter.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.2
• /
• pp.101-111
• /
• 2021

In general, several computational resources are required to perform multiple-loading transient response analyses. In this paper, we present the procedure for multiple-loading transient response analysis using the Krylov subspace model order reduction and Newmark's time integration scheme. We utilized ANSYS MAPDL, Python, and ANSYS ACT to automate the transient response analysis procedure in the ANSYS Workbench environment and studied several engineering numerical examples to demonstrate the feasibility and efficiency of the proposed approach.