• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.420-427
• /
• 1993

Dielectric thin film mirrors are embedded in multimode and single-mode fibers by a fusion splicing technique. The fibers with $45{\circ}$ angled embedded mirrors serve as ultra-compact directional couplers with low excess optical loss of 0.2 dB for multimode and 0.5 dB for single mode at 1.3 ${\mu}m$ and excellent mechanical properties. The reflectance is wavelength dependent and strongly polarization depencient. Far-field scans of the reflected output power measured with a white-light source show a pattern which is almost circularly symmetric with aspect ratio of 1.09 at 5% of the peak power. The splitting ratio in a multimode coupler measured with a diode laser source is much less dependent on input coupling conditions than in conventional fused biconical-taper couplers, indicating that these couplers are less susceptible to modal noise occuring in optical fiber communication systems. Spectral properties of multilayer internal mirrors normal to the fiber axis have been investigated experimentally, and a matrix analysis has been used to explain the results.

• 한국HCI학회:학술대회논문집
• /
• 2007.02b
• /
• pp.292-297
• /
• 2007

터치스크린을 통한 유저의 입력은 미디신호로 변환되며 생성된 블록은 하나의 음표 또는 다수의 음표로 남게 되며 유저가 설정한 타임라인의 빠르기에 따라 입력된 블록 위치의 음계 값을 토대로 소프트웨어 신디사이저의 오실 레이터에서 생성된 소리를 스피커로 출력해 낸다. 블록은 서로 다른 색깔의 8개의 미디채널로 존재하여 각 채널을 레이어 시켜 다른 블록을 생성하여 사인파, 톱니파, 삼각파, 사각파등을 엔벨로프 변형을 통해 만든 10가지 다른 소리로 지정하여 넣을 수 있다. 미디의 멀티채널방식을 이용해 다중 레이어의 입력방식을 취했으며, 관객은 작곡 모드에서는 일정한 패턴을 가진 단음이나 화성을, 게임모드에서는 생성된 공이 블록을 부딪치며 예측하기 어렵게 생성된 단음이나 화성음을 만들 수 있다. 생성한 음이 재생될 때에는 생성된 음정의 주파수 값과 음량에 따라서 RGB LED 조명이 반응을 하며 유저가 생성시킨 독특한 음악 진행에 따라 조명의 밝기와 색깔이 바뀌게 된다.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.3
• /
• pp.241-246
• /
• 2021

Modern loudspeaker systems are changing an active loudspeaker system that have multiple input channels and power amplifier. So, we cannot measure these active loudspeakers with IEC 60268-5 standard. This paper introduces an IEC 60268-21 standard that can measure an active loudspeaker having many analog and digital and wireless or wired inputs and having various control parameters.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.12
• /
• pp.19-26
• /
• 2005

We have studied the relationship between static mode behavior and dynamic characteristics of multiple transverse-mode VCSELs by measuring the modal L-I and I-V characteristics. Dependence of the resonance frequencies of RIN (relative intensity noise) spectra on the injection current can be understood by modal L-I characteristics and mode-coupling effects. Each transverse mode behaves as an independent diode laser with the different threshold current in large active-area VCSELs, and the multiple-step turn-on is observed when step-current input is applied. This multiple-step turn-on is a result of different turn-on delay times of the transverse modes. Since the multiple-step turn-on increases the rise-time significantly, the wide active-area VCSELs are not suitable for high-speed optical transmitters unless the input current is adjusted for single transverse-mode operation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.4
• /
• pp.36-42
• /
• 2008

40Gb/s CMOS Clock and Data Recovery circuit design for optical serial link is proposed. The circuit generates 8 multiphase clock using LC tank PLL and controls the phase between the clock and the data using the $2{\times}$ oversampling Bang-Bang PD. 40Gb/s input data is 1:4 demultiplexed and recovered to 4 channel 10Gb/s outputs. The design was progressed to separate the analog power and the digital power. The area of the chip is $2.8{\times}2.4mm^2$ for the inductors and the power dissipation is about 200mW. The chip has been fabricated using 0.18um CMOS process. The measured results show that the chip recovers the data up to 9.5Gb/s per channel(Equivalent to serial input rate of up to 38Gb/s).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.963-969
• /
• 2000

In this paper, we define two input-output gains of linear periodic time-varying systems. One is the ratio of output with worst-case l2-norm over all inputs with unit 12-norm. It denotes G($\iota_2,\iota_2$.The other is the ratio of output with worst-case RMS value over all inputs with unit RMS value. It denotes G(RMS, RMS) .It is fact that these two gains are equivalent for linear time-invariant system. In this paper, we prove these two gains are also equivalent for linear periodic time-varying system. In addition, the relationship between two method of obtaining the generalized frequency responses for linear periodic time-varying system is derived. Finally, we apply the defined input-output gains to M-channel filter-bank which is multi-rate signal Processing system, used to speech coding. In the filter-bank, generally, aliasing distortion, magnitude distortion, and phase distortion are present. It is shown that these are kept small if the filter-bank is designed by a method that optimizes the gain G($\iota_2,\iota_2$ of an error system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.587-594
• /
• 2005

In the paper, after we propose a viterbi decoder which has multiple buffering and parallel processing decoding scheme through expanding time-divided imput signal, and map a FPGA, we implement a channel coding system together with PC-based software. Continuous input signal is buffered as order of decoding length and is parallel decoded using a high speed cell for viterbi decoding. Output data rate increases linearly with the cell formed the viterbi decoder, and flexible operation can be satisfied by programming controller and modifying input buffer. The tell for viterbi decoder consists of HD block for calculating hamming distance, CM block for calculating value in each state, TB block for trace-back operation, and LIFO. The implemented cell of viterbi decoder used 351 LAB(Logic Arrary Block) and stably operated in maximum 139MHz in APEX20KC EP20K600CB652-7 FPGA of ALTERA. The whole viterbi decoder including viterbi decoding cells, input/output buffers, and a controller occupied the hardware resource of $23\%$ and has the output data rate of 1Gbps.

• Journal of Radiation Protection and Research
• /
• v.20 no.2
• /
• pp.85-95
• /
• 1995

Radiation measuring system using wireless communication method with single channel has been diveloped and tested. In this system, radiation signals from GM tube are transformed into digital pulses in pulse processing circuit and modulated in FSK (frequency shift keying) circuit for digital communication and then wirelessly transmitted to a receiving unit. The digital pulses received are then demodulated in FSK circuit and converted into radiation dose/dose rate in the data acquisition unit to display on the screen of a personal computer. The performance of this system was evaluated by using both a pulse generator and a standard radiation source(Cs-137). In both cases, digital pulses with 5V were observed in pulse processing circuit without distortion of their shape through wireless communication system. The experimental results of radiation measurement by this system after several test-irradiation of GM detector to a standard radiation source(Cs-137), showed good agreement with irradiation dose rate within 10% difference, and proved that this system could be effectively utillized as radiation measuring instrument. It is expected that this wireless radiation measuring system developed for the first time in Korea, can be used as a radiation monitor as well as a personal dosimeter if we can further improve this system to adopt wireless multichannel communication system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.1010-1019
• /
• 2016

The K-user multiple-input single-output broadcast channel is considered under per-antenna power constraints, i. e., each transmit antenna must satisfy its own power constraints. A low complexity zeroforcing(ZF) precoder is proposed when the number of transmit antennas M is greater than K. The proposed precoder design significantly reduces computational complexity for the precoder construction while attaining the sum spectral efficiency close to that achievable by the optimal ZF precoder.

• Journal of Satellite, Information and Communications
• /
• v.7 no.2
• /
• pp.76-79
• /
• 2012

Satellite power system is critical for mission design and survival operation. Accordingly power conversion circuit has to stable design and verify for operation condition change (load, voltage, thermal condition). however, multi-stage make complicate for modeling and get all state solution. In this paper present all state solution for multi-stage converter by using Extended Describing Function(EDF) modelling. EDF modelling has merit to solve complex circuit but it has limit too. Because of fundamental approximation, EDF modeling is not match all topology. Consequently, we verify passible topology for EDF modeling and stable design multi-stage converter.