• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2834-2851
• /
• 1997

In this paper, a design and implementation of VHDL compiler front-end, aims at supporting the full-set of VHDL '87 & '93 LRM and carring out the preprocessing of VHDL-to-C, is described. The VHDL compiler front-end includes 1)the symbol tree of analyzed data to represent the hierarchy, the scope and visibility, the overloading and homograph, the concurrent multiple stacks in VHDL, 2)the data structure and supportig routies to deal with the objects, the type and subtype, the attribute and operation in VHDL, 3)the analysis of the concurrent/sequential statements, the behavior/structural descriptions, of semantic token and the propagation of symbol & type to improve the registration and retrieval procedure of analyzed data. In the experiments with Validation Suite, the VHDL compiler front-end could support the full-set specification of VHDL LRM '87 & '93; and in the experiments to asses the performance of symantic token for the VHDL hierachy/visibility/concurrency/semantic checking, the improvement of about 20-30% could be achieved.

• Journal of KIISE:Software and Applications
• /
• v.35 no.11
• /
• pp.701-704
• /
• 2008

A general automaton allows multiple input transitions, so a special treatment is required when the history of transitions is needed. An LR automaton keeps the past transitions in the stack to use them during parsing. On the other hand, when each state in an automaton contains in itself the past transition history, the trace overhead of past transitions is unnecessary. The paper suggests a single state parsing automaton that does not depend on the past transitions. The applicable grammar class is less than LR grammars, but each state in a new automaton contains the past information, so the tracing of the history is not required compared to LR automaton.

• Convergence Security Journal
• /
• v.22 no.3
• /
• pp.13-18
• /
• 2022

With the rapid development of IT technology, integration with existing industries has led to an increase in smart manufacturing that simplifies processes and increases productivity based on 4th industrial revolution technology. Security threats are also increasing and there are. In the case of supply chain attacks, it is difficult to detect them in advance and the scale of the damage is extremely large, so they have emerged as next-generation security threats, and research into detection technology is necessary. Therefore, in this paper, we collect, store, analyze, and visualize logs in multiple environments in real time using ELK Stack and Sysmon, which are open source-based analysis solutions, to derive information such as abnormal behavior related to supply chain attacks, and efficiently We try to provide an effective detection method.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06d
• /
• pp.25-27
• /
• 2006

블루투스는 무선 홈 네트워킹을 구성하는 하나의 기술로 자리를 잡았지만, 기존의 홈 네트워킹을 구성하는 IRDA, 무선랜, Home RF, ZigBee 등에 비하여 블루투스 사용으로 인한 큰 이득이 없어 이용되지 않는 것이 현재 블루투스가 직면한 문제이다. 비슷한 통신반경을 지원하는 IRDA와 비교하면 가격과 전력소비에서 블루투스의 이점이 떨어지고, 다중 연결을 지원하는 장점에도 불구하고 10m 내의 전송 반경으로는(저 전력 사용 시) 집안을 전부 커버할 수 없기 때문에 무선랜에 비해 홈 네트워킹에서 이용성이 떨어지는 것이 사실이다. 하지만 이런 블루투스의 AD-HOC 라우팅을(1:1 혹은 1:다) 위한 블루투스 프로토콜 스택에 라우팅 프로토콜 스택을 추가함으로써 블루투스가 장착된 정보 가전기기는 주변으로부터 라우팅 정보를 수집하게 되고 라우팅 테이블을 구성할 수 있게 된다. 그러므로 전송 범위의 이상적인 설계에서 무선랜보다 넓어지게 되므로 홈 네트워킹에서 블루투스 사용의 단점이 보안됨은 물론 집안을 하나의 WEB처럼 구성할 수 있게 된다. 이에 다른 기술에 비한 저렴한 가격, 접속의 용이성, 저 전력 소비 둥과 같은 기존의 장점에 전송 거리의 단점이 보안된 블루투스 라우팅 프로토콜 기술은 IRDA, 무선랜보다 기술적 우위를 가짐으로써 홈 네트워킹에 적용이 많아지리라 예상할 수 있다. 더 나아가 블루투스 기술이 포함되어 있는 모바일 기기가 정점 늘어남에 따라 모바일 기기와의 연동에 의한 홈 네트워킹이 실생활에 적용되리라 예측되며, 집뿐만 아니라 어디에서나 다른 모바일 기기와 연결되어 네트워크를 이루는 유비쿼터스 네트워킹이 실현 될 수 있으리라 본다.-filtered CU)과는 비슷한 결과를 보였다. 결과적으로 제안된 방법은 전통적인 켑스트럴 평균 차감법에 기반하여 효과적인 채널 정규화가 가능하다는 것을 보였다.ttention since the operation of local autonomy in Korea. This trend focuses on ′visual landscape planning′, and it is expected to grow drastically in the near future. Therefore, it is recommended that we promote the more elaborate methodology of ′visual landscape planning′, which also includes the ecological and cultural aspects of the environment. 7월 시료에는 ethane, ethyl formate, trans-2-hexenal의 순서로 그 함량이 많았으며, hydrocarbon류가 전체성분의 30.42%를 차지하였다. 8월 시료는 benzyl alcohol, ethyl formate 및 trans-2-hexenal의 순서로 많이 함유되어 있었으며, ester류가 35.60%를 차지하였다. 또한 9월 시료에도 ester류가 32.92%를 차지하였으며 ethyl acetate, benzyl alcohol, ethane 및 trans-2-hexenal의 순서로 함량이 높았다.to isolate the major component of silkworm powder, which exerts blood glucose-lowering e

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.283-287
• /
• 2007

KIER has been developing the anode-supported flat tubular solid oxide fuel cell unit bundle for the intermediate temperature($700{\sim}800^{\circ}C$) operation. Anode-supported flat tubular cells have Ni/YSZ cermet anode support, 8 moi.% $Y_2O_3$ stabilized $ZrO_2(YSZ)$ thin electrolyte, and cathode multi-layer composed of Sr-doped $LaSrMnO_3(LSM)$, LSM-YSZ composite, and $LaSrCoFeO_3(LSCF)$. The prepared anode-supported flat tubular cell was joined with ferritic stainless steel cap by induction brazing process. Current collection for the cathode was achieved by winding Ag wire and $La_{0.6}Sr_{0.4}CoO_3(LSCo)$ paste, while current collection for the anode was achieved by using Ni wire and felt. For making stack, the prepared anode-supported flat tubular cells with effective electrode area of $90\;cm^2$ connected in series with 12 unit bundles, in which unit bundle consists of two cells connected in parallel. The performance of unit bundle in 3% humidified $H_2$ and air at $800^{\circ}C$ shows maximum power density of $0.39\;W/cm^2$ (@ 0.7V). Through these experiments, we obtained basic technology of the anode-supported flat tubular cell and established the proprietary concept of the anode-supported flat tubular cell unit bundle.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.55-58
• /
• 2008

RFID(Radio frequency IDentification) leader is collision of data, when recognizing the multiple tag the inside area. This collision became the cause which delays the tag recognition time of the leader. The protocol which prevents the delay of tag recognition time of the leader the place where representative it uses QT(Query Tree) algorithms, it uses a collision bit position from this paper and are improved QT-MTC(Query Tree with Multi-Tag Cognition) algorithms which it proposes. This algorithm stored the bit position which bit possibility and the collision where the collision happens occurs in the stack and goes round a tree the number of time which, it reduced could be identified two tags simultaneously in order, it was planned. A result of performance analysis, It compared in QT protocols and the this algorithm against the tag bit which is continued a tush efficiency improvement effect was visible.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.6
• /
• pp.505-511
• /
• 2015

Solid oxide fuel cell operate at high temperature ($800{\sim}1000^{\circ}C$). High temperature have an advantage of system efficiency, but a weak durability. In this study, linear state space controller is designed to handle the temperature of solid oxide fuel cell system for proper thermal management. System model is developed under simulink environment with Thermolib$^{(R)}$. Since the thermally optimal system integration improves efficiency, very complicated thermal integration approach is selected for system integration. It shows that temperature response of fuel cell stack and catalytic burner are operated at severe non-linearity. To control non-linear temperature response of SOFC system, gain scheduled linear quadratic regulator is designed. Results shows that the temperature response of stack and catalytic burner follows the command over whole ranges of operations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4B
• /
• pp.184-191
• /
• 2008

NanoQplus, which is an embedded operating system for wireless sensor networks (WSNs) and developed by Electronics and Telecommunications Research Institute (ETRI), provides programmer-friendly preemptive multi-threading programming technique, but it has poor network protocol stack, as compared to TinyOS, one of the famous operating systems for WSNs. In this paper, we apply dynamic MANET on-demand routing (DYMO) protocol, which is being standardized in Internet Engineering Task Force (IETF), to NanoQplus. Since DYMO has been proposed for mobile ad-hoc networks (MANETs) and MANETs have less resource restrictions than WSNs, the basic DYMO protocol cannot be applied to WSNs without modifications. Moreover, coherence with MAC protocol should be considered in order to eliminate redundant data between MAC and network layers. Thus, we propose a modified version of the basic DYMO protocol for NanoQplus. The experimental results from a real sensor network test-bed show that the DYMO implementation using NanoQplus works efficiently in WSNs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.999-1005
• /
• 2008

RFID(Radio Frequency IDintification) leader is collision of data, when recognizing the multiple tag the inside area. This collision became the cause which delays the tag recognition time of the leader. The protocol which prevents the delay of tag recognition time of the leader the place where representative it uses QT(Query Tree) algorithms, it uses a collision bit position from this paper and are improved QT-MTC(Query Tree with Multi-Tag Cognition) algorithms which it proposes. This algorithm stored the bit position which bit possibility and the collision where the collision happens occurs in the stack and goes round a tree the number of time which, it reduced could be identified two tags simultaneously in order, it was planned. A result of performance analysis, It compared in QT protocols and the this algorithm against the tag bit which is continued a high efficiency improvement effect was visible.

• Korean Journal of Remote Sensing
• /
• v.32 no.6
• /
• pp.617-627
• /
• 2016

Many kinds of OGC-based web standards have been utilized in the lots of geo-spatial application fields for sharing and interoperable processing of large volume of data sets containing satellite images. As well, the number of cloud-based application services by on-demand processing of virtual machines is increasing. However, remote sensing applications using these two huge trends are globally on the initial stage. This study presents a practical linkage case with both aspects of OGC-based standard and cloud computing. Performance test is performed with the implementation result for cloud detection processing. Test objects are WPS 2.0 and two types of geo-based service environment such as web server in a single core and multiple virtual servers implemented on OpenStack cloud computing environment. Performance test unit by JMeter is five requests of GetCapabilities, DescribeProcess, Execute, GetStatus, GetResult in WPS 2.0. As the results, the performance measurement time in a cloud-based environment is faster than that of single server. It is expected that expansion of processing algorithms by WPS 2.0 and virtual processing is possible to target-oriented applications in the practical level.