• Proceedings of the Korea Information Processing Society Conference
• /
• 2024.05a
• /
• pp.137-140
• /
• 2024

가상 및 증강현실(VR/AR), 원격 제어, 산업 자동화를 위한 실시간 애플리케이션이 증가함에 따라 무선 통신 네트워크의 처리량과 지연시간 성능이 중요해졌다. 이에 따라 Wi-Fi 8 에서는 초고신뢰 (Ultra-High Reliable, UHR)을 목표로 표준화가 진행 중이며 다수의 AP가 협력하여 데이터를 전송하는 다중 AP 협력 기법이 핵심 기술로 논의되고 있다. 하지만 기존의 다중 AP 협력 환경에서 협력 전송을 위한 제어 정보로 인한 간섭 증가와 OBSS(Overlapped Basic Service Set) 간섭 문제를 고려하지 못하고 있다. 따라서 본 논문에서는 효율적인 다중 AP 협력 전송을 위한 단순화된 채널 관리 방법(Simplified Channel Management Mechanism, SCMM)을 제안한다. 실험 결과에 따르면, SCMM 이 종래모델 대비 처리량은 평균 21.23% 증가했고, 지연시간은 평균 51.02% 감소했다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1A
• /
• pp.70-75
• /
• 2005

The efficient hardware design of the the algorithm is important in wide variety of DSP. One example is OFDM(Orthogonal Frequency Division Multiplexing) based WLAN(Wireless Local Area Network) systems which place high requirements on throughput and power consumption on FFT. The output RAM is composed of two banks of $64{\times}W.$ The banks are swapped immediately following the falling edge or the start signal strobe. This bank swapping allows 64-Point FFT to continue Processing samples and to continue filling the alternative bank, without affecting the data flow outputs.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.45-52
• /
• 2013

Coordinated Multi-Point (CoMP) is considered as a technology in the 3rd Generation Partnership Project(3GPP) Long Term Evolution-Advanced (LTE-A) system. In this paper, we design and analyze the performance of the Coordinated Beamforming (CB) technique, which is one major category of CoMP. We perform Monte Carlo simulations with a Heterogeneous Network (HetNet) in LTE-A, and confirm the performance through a graph of the Cumulative Distribution Function (CDF). From the simulation results, we show significant performance gain with the CoMP technique, and better performance when we apply various schemes of scheduling and precoding.

• Journal of Broadcast Engineering
• /
• v.14 no.6
• /
• pp.733-741
• /
• 2009

The design rule of digital communication systems is the reliable data transmission with high spectral efficiency and minimum allowable power. This paper suggests the method that saves the average power by implementing a multi-dimensional constellation in case of multi-carrier communication system. By using multi-dimensional constellations we can relocate constellation points in the form of a sphere. If we simply convert the two-dimensional QAM modulation into multi-dimensional QAM, constellation points of 2 N dimensional cube form are made up. Relocating outermost constellation points of 2 N dimensional cube form into low energy constellation points, the constellation of the 2 N-dimensional sphere form is made up which decreases power consumption. In this paper, the multi-dimensional constellations of 2 N-dimensional sphere form are designed from 16-QAM to 2,048-QAM, and power reductions are obtained by comparing constellations of 2-dimensional QAMs and multi-dimensional constellations of 2 N-dimensional sphere form. The result shows that the average power consumption of higher dimensional constellations increases, because the more a dimension elevates, the more the relocatable constellation points increase. But, the increment of the average power savings decreases as the a dimension elevates. The transmission of the data by using multi-dimensional constellations of the sphere form is effective to save the average power consumption with little hardware complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5A
• /
• pp.348-357
• /
• 2012

Recently, smartphone, notebook, PC and other supporting wireless LAN device have come into wide use. By increasing user that use wireless LAN device, wireless traffic also increased. If wireless traffic through one AP is increase, it causes throughput decrease. To solve this problem, wireless LAN service provider install more AP where overload occurred. But this is not enough. Because stations can't know AP's load factor, and APs do nothing for load balancing. In this paper, we propose Multi-Interface Access Point(MIAP) to solve this problem. MIAP operate same as multiple APs with multi-interface, and MIAP measure each interface's load periodically. If MIAP detect overloaded interface, MIAP transfer station from overloaded interface to under-loaded interface. We conducted an experiment for verifying existing problem, and we found this problem occurred. We plan an experiment scenario for a comparison between existing AP and MIAP, and excute these experiment. In the result, we show MIAP with load balancing can improve total throughput about 72% and stabilize delay jitter than existing AP.

• The KIPS Transactions:PartA
• /
• v.11A no.2
• /
• pp.123-128
• /
• 2004

Recent advancement in RF technology and wireless communications has enabled the development of noble networks. Bluetooth that can be used in various application field is a kind of WPAN(Wireless Personal Area Network) standard that is widely known. Bluetooth enables voice and data applications to operate simultaneously. Various applications have been implemented based on standard Profiles. In this paper, we describes the development of Biuetooth network AP(Access Point) system for network connection of Bluetooth devices. Unlike headset, mouse, and keyboard, the access point should have capability to support multiple connection and stabilized network throughput. We have designed and developed the hardware system, core stack and profiles on embedded system to comply with standard specification. Our system showed compatibility and good protocol performance through testing with lots of products that is available in market.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.4
• /
• pp.388-393
• /
• 2019

As a fiiting method to data with outliers, RANSAC(RANdom SAmple Consensus) based algorithm is widely used in fitting of line, circle, ellipse, etc. CUDA is currently most widely used GPU with massive parallel processing capability. This paper proposes an efficient CUDA implementation of multiple planes fitting using RANSAC with 3d points data, of which one set of 3d points is used for one plane fitting. The performance of the proposed algorithm is demonstrated compared with CPU implementation using both artificially generated data and real 3d heights data of a PCB. The speed-up of the algorithm over CPU seems to be higher in data with lower inlier ratio, more planes to fit, and more points per plane fitting. This method can be easily applied to a wide variety of other fitting applications.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.1267-1270
• /
• 2000

위성통신 시스템은 기존의 지상망이나 광 케이블 기술에 비해 통신 대역폭의 유연성과 다중 접속능력, 이동통신, 광역성, 멀티포인트 및 브로드캐스팅 등의 본래의 특징으로 인해 초고속정보통신망 구축에 중요한 역할을 하게 된다. 특히 OBP (On-Board Processing) 기술을 적용하면 기존 위성통신 탑재장치의 수동적인 중계 기능 이외에 복조/재변조, 부호/복호화 및 오류정정, 중계기 및 빔간의 상호 연결/절체 등의 새로운 기능이 추가되어 능동적인 중계를 가능하게 함으로써 통신 품질의 향상, 통신 링크의 전송 효율 개선, 전송 용량 증대 등의 장점을 갖고있다. OBP 탑재 위성 B-IDSN 중계망은 하나의 거대한 가상 ATM 교환기로 간주되고, 여러중계 지구국들중 목적 중계 지구국으로 패킷들을 직접 라우팅 할 수 있는 장점이 있다. 본 논문은 OBP 탑재 위성 B-ISDN 연동 프로토콜 연구를 수행하는 것으로서, 위성 B-ISDN 구조와 각 지구국별 신호 기능 및 B-IDSN 신호 시스템인 DSS2 계층 3 신호 프로토콜, B-ISUP 프로토콜, S-BISUP 프로토콜의 구조를 분석하였다. 또한 점-대-다지점을 위한 B-ISDN의 연결과 소유권 및 각각의 프로토콜에 대한 메시지와 프리미티브를 정의하여, 이를 토대로 OBP 탑재 위성 B-IDSN 연동 프로토콜의 기본 호 처리 절차를 설계 및 구현하고, 이를 테스트하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.5
• /
• pp.83-92
• /
• 2010

Along with the advance of industrial technology in mobile telecommunications and diversity in customer needs, today's Korean mobile telecommunication market has rapidly expanded due to stronger competition among businesses as well as increasing the number of subscribers. 3G roll-outs of mobile telecommunications service, so called "HSDPA" has seriously promoted marketing strategies among mobile telecommunication companies which led to move to the next generation customers. Understanding the competitive situation, mobile telecommunications companies are currently focusing on increasing sales per subscriber as well as increasing the number of subscribers as a solution to occupy the leading position in the mobile telecommunications industry in the future. The purpose of this study was to classify the customers in mobile telecommunications service with or without higher tendency of intention to subscribe and use the service using discriminant analysis. Through the discriminant analysis, discriminant function which classifying the critical user has been identified. The result of this study will give useful marketing strategies in competitive HSDPA mobile telecommunications market.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3C
• /
• pp.175-182
• /
• 2011

This paper presents a novel eight-parallel 128/256-point mixed-radix multi-path delay commutator (MRMDC) FFT/IFFT processor for orthogonal frequency-division multiplexing (OFDM) systems. The proposed FFT architecture can provide a high throughput rate and low hardware complexity by using an eight-parallel data-path scheme, a modified mixed-radix multi-path delay commutator structure and an efficient scheduling scheme of complex multiplications. The efficient scheduling scheme can reduce the number of complex multipliers at the second stage from 88 to 40. The proposed FFT/IFFT processor has been designed and implemented with the 90nm CMOS technology. The proposed eight-parallel FFT/IFFT processor can provide a throughput rate of up to 27.5Gsample/s at 430MHz.