• The Journal of the Acoustical Society of Korea
• /
• v.17 no.3
• /
• pp.37-46
• /
• 1998

본 연구에서는 압전 세라믹인 PZT를 이용하여 두께 진동모드의 다중모드 필터를 설계, 제작하였다. 다중모드 세라믹필터의 등가회로를 설계하였고, 이를 이용하여 설계변수 인 물성변수와 형상변수에 따른 필터전달특성의 경향을 분석하였다. 이를 바탕으로 10.7MHz의 중심주파수를 가지는 세라믹필터를 제작하였고, 설계변수 중에서 압전세라믹 기 판과 전극형상의 변화에 따른 필터의 전달특성의 변화를 실험적으로 검증하였다. 본 연구를 통한 경향분석결과는 다양한 진동모드와 다양한 주파수대를 가지는 다중모드 필터를 설계하 는데 있어서 유용한 도구로 사용될 수 있을 것이다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.2
• /
• pp.17-22
• /
• 2009

Estimate method of cable tension forces can be classified into direct method and indirect method. Direct method is not accuracy and it has many restrictions. Therefore, in generally Indirect method, vibration method using natural frequency, has been applied to estimate the tension forces. In this study, cable tensions of recently constructed cable-stayed bridge are measured using string vibration method and this result comparing with result of multiple mode method. To put it brief, the error of string vibration method is not exceeding 2% under 7th mode. Specially third and 4th mode error is not exceeding 1%. safety.

• Journal of KSNVE
• /
• v.14 no.2
• /
• pp.46-53
• /
• 2004

압전션트감쇠란 압전재료를 구조물에 부착시키고 간단한 션트회로를 연결시켜 구조물의 진동에너지를 압전재료에서 전기적 에너지로 변환시킨 후 연결된 회로에서 전기에너지를 열 에너지로 소산시킴으로서 구조물의 진동 및 소음을 저감시키는 방법이다. 이 방법은 공진주파수에서 간단한 회로를 사용하여 효과적으로 진동 및 소음을 저감시킬 수 있으며 구조가 간단하고 가격이 저렴하므로 소음진동의 여러분야에 응용이 가능하다. 본 글에서는 압전션트 감쇠의 원리와 단일모드, 다중모드의 감쇠 기법의 이론을 소개한다.(중략)

• Composites Research
• /
• v.14 no.1
• /
• pp.39-46
• /
• 2001

Experimental studies on the adaptive multi-mode vibration control of composite beams have been performed using neuro-controller. Neuro-controllers require too much computational burden, which blocks wide real-time applications of neuro-controllers. Therefore, in this paper, an adaptive notch filter is proposed to separate a vibration signal into each modal vibration signal. Two neuro-controllers with fewer weights are connected to the corresponding modal signals to generate proper modal control forces. The vibration controls using the adaptive notch filter and neuro-controllers have been performed for two specimens. A and B, which have different natural frequencies because of different positions of tip masses. Significant vibration reduction has been observed in both cases. The vibration control results show that the present neuro-controller has good adaptiveness under the system parameter variations.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.12
• /
• pp.956-963
• /
• 2002

In a recent construction industry, cable supported structures such as a cable-stayed bridge or space stadium have been increasingly constructed according to rapidly upgrade their related technologies. Generally stay cables as a critical member need to be rearranged for being satisfied with design tension forces. In this purpose, a vibration method has been applied to estimate the tension forces exerted on existing stay cables. In this study, cable vibration tests were tarried out to evaluate the cable tension forces comparing with theoretical and practical formulas. Using the measured frequencies obtained from free vibration and Impulsive tests, an accuracy of the estimated tension forces is confirmed according to use the first single mode only or higher multiple modes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.167-168
• /
• 2012

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.296-297
• /
• 2012

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.217-218
• /
• 2012

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.5
• /
• pp.15-23
• /
• 2010

To reduce the vibration levels, additional dissipation elements such as dry friction dampers are sometimes integrated into bladed disk assembly. In this study, forced response analysis systems for a tuned bladed disk with friction dampers were developed and verified. For the efficient nonlinear vibration analysis, multi-harmonic balanced method and cyclic boundary condition were used. Also, mode shapes obtained using fictitious mass method were used to describe the motion of the structures with the concentrated structural nonlinearity, friction damper. The relative convergence of fictitious mass and traditional unconstrained modes were compared.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.176-183
• /
• 1997

본 논문에서는 모드합성법의 단점이라고 할 수 있는 고차모드의 생략오차를 보완하면서 합성 후의 전체구조물의 자유도를 줄일 수 있는 자유경계합성법을 대형복합구조물에 적용하기 위하여 일반화된 다중모드합성법을 제시하고 판구조물과 모형차에 적용하여 그 효율성을 검증하였다. 또한 모드합성법의 개념을 구조물의 동적구조변경에 적용하기 위한 부분구조 모드물성치 감도법을 제안하였으며, 이의 타당성을 확인하기 위하여 판구조물에 적용하였다. 이 방법은 물성치가 변하는 분계에서만 모드물성치의 감도를 다시 계산하여 합성하면 되므로 대형구조물의 구조변경시 효과적인 방법이다.