• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.2
• /
• pp.69-80
• /
• 2002

In this paper, signed-rank based nonparametric detectors are used for direct sequence code division multiple access pseudo-noise code acquisition systems in frequency-selective Rician fading channels. We first derive the locally optimum rank detector, and then propose the locally suboptimum rank (LSR) and k-th order modified signed-rank (MSRk) detectors using approximate score functions. We compare the serial and hybrid parallel double-dwell schemes using the LSR and MSRk detectors with those using the conventional squared-sum (SS) using the cell averaging constant false alarm rate processor and modified sign detectors. From the simulation results, it is shown that the LSR and MSRk detectors perform better than the SS detector using the cell averaging constant false alarm rate processor.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.3
• /
• pp.241-246
• /
• 2015

The interest of New Renewable Energy is increasing globally because of the increment of the uncertainty for the energy's supply and demand, and the increment of the frequency in weather anomaly and its damages. One of the New Renewable Energies, Hydrogen receives attention as the future energy that can deal with global environment regulation. Fuel Cell Electric Vehicle (FCEV) is an environment-friendly vehicle that uses Hydrogen as fuel. The electric power for FCEV is generated by chemical reaction with Oxygen from the air and Hydrogen. Hyundai Motor Company (HMC) has developed a proprietary fuel cell system since 2005. In 2012, HMC is the first car maker that mass-produces the ix35 FCEV to the worldwide such as North America, Europe, etc. In order to develop and improve the FCEV technology, data acquisition and analysis of the driving vehicle information is essential. Therefore, the monitoring system is developed, which is consist of datalogger, Automatic Vehicle Location (AVL) server and main server. Especially, WCDMA technology is integrated into the system which enables the data analysis without any restriction of time and region. The main function of the system is the analysis of the driving pattern and the component durability, and the safety monitoring. As a result, ix35 FCEV has successfully developed by using the developed monitoring system. The system is going to take an advantage of development in the future FCEV technology.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.6
• /
• pp.749-756
• /
• 2015

In this paper, we propose a unique systolic structure and communication algorithm that maintains a solid link between nodes using synchronous digital communication and enables low power communication. This system was designed by using CC2500 RF transceiver, CC2590 RF front end and C8051F330 low power microcontroller. The measurement of power consumption in the network link shows below $400{\mu}W$ in data transfer rate 320bps. The system constitutes the base unit of low power wireless network that was composed of each seven link nodes having eight sensor nodes. Results of the experiments show that link nodes using a 4Ah battery could operate over 3 years without replacement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2293-2302
• /
• 2012

New optical transmission links technique for compensating of the distorted wavelength division multiplexed (WDM) signals due to group velocity dispersion (GVD) and self phase modulation (SPM) in single mode fiber (SMF) are proposed. The proposed optical links have optical phase conjugator (OPC) placed at nearby WDM transmitter or receiver and repeater spans with artificial distribution of SMF length and residual dispersion per span (RDPS). It is confirmed that optimal link configuration expanding effective launching power range and effective net residual dispersion (NRD) by improving system performance is that having OPC closely placed at WDM receiver and the gradually descended distribution of SMF length and RDPS of each repeater spans, related with the gradually increased optical link length. And, it is also confirmed that NRD is controlled by postcompensation in optimal optical link with OPC closely placed at WDM receiver.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.15-21
• /
• 2009

The goal of wireless sensor networks is to collect sensing data on specific region over wireless communication. Sink node gathers all local sensing data, processes and transmits them to users who use sensor networks. Generally, senor nodes are low-cost, low power devices with limited sensing, computation and wireless communication capabilities. And sensor network applies to multi-hop communication on large-scale network. As neighboring sensor nodes have similar data, clustering is more effective technique for 'data-aggregation'. In cluster formation technique based on multi-hop, it is necessary that the number of cluster member nodes should be distributed equally because of the balance of cluster formation To achieve this, we propose a method to customize cluster member nodes for energy-efficiency in wireless sensor networks.

• The KIPS Transactions:PartC
• /
• v.11C no.5
• /
• pp.677-682
• /
• 2004

In the present paper routing and wavelength assignment (RWA) in optical WDM networks is considered. Previous techniques based on the combination of integer linear programming and graph coloring are complex and require extensive use of heuristics. Such methods are mostly slow and sometimes impossible to get results due to infeasibility. An alternative approach applied to RWA employs on the greedy algorithm for obtaining the maximum edge disjoint paths. Even though this approach is fast, it produces a solution for any connection request, which is very far from the optimal utilization of wavelengths. We propose a novel algorithm, which is based on the maximum flow technique to obtain the maximum quantity of edge, disjoint paths. Here we compare the offered method with previous maximum edge disjoint paths algorithms ap plied to the RWA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.583-591
• /
• 2009

OFDM(orthogonal frequency division multiplexing) signal with high PAPR(peak to average power ratio) produces the nonlinear distortion and/or decreases down the power efficiency of HPA(high power amplifier). So, the IMD(inter-modulation distortion) reduction method was proposed to reduce the nonlinear distortion, which shows better BER(bit error rate) performance than the PAPR reduction methods. However, IMD reduction method has inherent problem which system complexity and processing time increases because the FFT(fast Fourier transform) processor is added in transmitter and decision criterion of IMD reduction method is computed in frequency domain,. In this paper, therefore, we propose a new IMD reduction method to reduce the computational complexity and structure of IMD computation. And we apply this proposed method into OFDM system using PTS(partial transmit sequence) scheme and compare the computational complexity between conventional and proposed IMD reduction method. This method can reduce the system size and computational complexity. Also, the proposed has almost same BER performance with the conventional IMD reduction method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1483-1490
• /
• 2009

Orthogonal frequency division multiplexing (OFDM) has been investigated as an enabling technology for future wireless communications such as ad hoc, mesh and sensor networks. However, prior works on bit-loading lack consideration of the constraints on energy and computing facility in sensor networks. In this paper, we suggest an adaptive bit allocation algorithm for a frequency selective fading channel environment which exploits channel state information obtained through a feedback channel. The proposed algorithm significantly reduces computational complexity and satisfies the power budget. Also, its throughput is comparable to the optimum solution. Simulation results support the claim stated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8C
• /
• pp.667-679
• /
• 2010

The use of femtocells in buildings and homes has been widely studied as a means to enlarge the cell coverage and increase the network capacity of mobile communication systems. Femtocells for Mobile WiMAX (M-WiMAX) using time division duplexing (TDD) requires frame synchronization with neighboring base stations to avoid interference between uplink and downlink signals. In this paper, we propose a new frame synchronization method for femtocell using IEEE 802.11 based wireless backhaul, which transfers the time information of mobile network to femtocells via the beacon signal provided by IEEE 802.11. Also, in order to reduce timing error of the proposed method, we modify the collision avoidance scheme in the transmitter of IEEE 802.11 and apply a timing estimation technique designed in the sense of least squares to the receiver of IEEE 802.11. Through computer simulations using the proposed scheme, we evaluate the performance of frame synchronization for femtocells and show that the recovered timing information satisfies the timing specification defined by M-WiMAX standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3B
• /
• pp.264-273
• /
• 2009

For IEEE 802.15.3 HR-WPAN, we propose the DABL algorithm that PNC can allocate the channel times to the DEV in super frame in order that system frame throughput is increased and the delay is decreased. In detail, the DABL algorithm allows to dynamically allocate channel time as well as to adaptively apply the modulation and coding scheme based on the link quality of the DEV. In addition, due to the facts that QoS is quite different depending on service types, we provide the DABL algorithm taking into account RT(Real Time) traffic and Non-RT traffic respectively. Finally, we show simulation results of the DABL algorithm compared to the conventional algorithm that the PNC equally allocates channel times to the DEV regardless of the link quality of the DEV.