• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.11
• /
• pp.17-22
• /
• 2005

In this study, we suggested wave-variable Bragg lattice using the characteristic of the Bragg wave that varies according to the change of the temperature imposed on the optical fiber lattice device, and experimented using a simulation test. We analyzed the results of the FBG change according to the change of the temperature obtained in the variable FEG computer simulation and experiment to suggest optimal data. Therefore, utilizing wave-variable optical filter through FBG allows us to combine other channels beyond optical fiber lattice device wave, and can be used as a helpful device in the Dense Wavelength Division Multiplexed system with a channel intervention of 0.08nm(10GHz).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.1
• /
• pp.21-28
• /
• 2004

We have demonstrated a low speed weigh-in motion system using FBG sensors and performed field test at a trial road. Technique, called identical chirped grating interrogation, have used for a demodulation relying on the mismatching of two identical broadband chirped gratings. We compensated the fluctuation of LED power and the temperature of sensor and used a lock-in amplifier to reduce effect of noise. We could design a bending plate that the measurement results are independent of position of weight. The FBG sensors weigh-in motion system showed linearity and reproducibility.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.172-180
• /
• 2012

In multi-static sonar for detecting an underwater target, received signals contain the target echo, reverberation and clutter. Clutter and reverberation are main causes of increasing the false alarm rate. MRAL classifies received signals according to the spatial similarity, and it regards classified signal as reflected signals from a reflector. MRAL reduces the false alarm rate this way. However, the results of MRAL can have localization errors. In this paper, an MRAL post processing algorithm is proposed to reduce the localization errors with the least square (LS) method.

• Korean Journal of Optics and Photonics
• /
• v.17 no.4
• /
• pp.366-370
• /
• 2006

An optical microphone incorporating a reflective diaphragm and a fiber-optic head was demonstrated. The diaphragm was made of a micromirror membrane which is suspended by a silicon bar connected to a frame, allowing fer a displacement induced by acoustic waves. A compact, simple optical head was implemented by exploiting a single multimode fiber. For the assembled microphone, the static characteristics were investigated to find the operation point defined as the optimum distance between the head and the diaphragm, and a flat frequency response with a variation of $\sim$2dB for the range of up to 2 kHz was accomplished.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1053-1060
• /
• 2019

The satellite antenna for collecting information is mainly classified into reflector antenna, lens antenna, and phased array antenna. Among them, the phased array antenna with the excellent antenna pattern control performance for a multi-beam system is frequently used. Although the terrestrial signal information collection based on the satellite is not much effected geographically, it requires the accurate angle-of-arrival (AOA) information of the interesting signal. In this paper, we discuss the characteristics and the advantages/disadvantages of the antenna array shape employed in the phased array antenna. In addition, we present the Cascade AOA estimation algorithm based on a square array antenna mounted on the satellite receiver, and show the performance evaluation results through the computer simulation.

• Journal of Korea Multimedia Society
• /
• v.8 no.1
• /
• pp.88-100
• /
• 2005

In computer graphics, realistic skin rendering has been regarded as difficult tasks and remains as an important research subject. Translucent materials like skin have some complicated optical properties including subsurface scattering. In this paper, we proposes a skin shader based on subsurface scattering to render realistic skin and it has been implemented as a plug-in for Maya, 3D Package. The rendered image using this proposed skin shader appears more realistic than the rendered image using classical shading techniques. Furthermore, we could model sebum, epidermis, dermis using specular reflection, multiple scattering, single scattering respectively.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.393-399
• /
• 2011

A defect analysis program of the composite motor case was developed to apply the ultrasonic signal processing method on basis of the ultrasonic pulse-echo method and the defects of FRP delamination and FRP/Rubber disbond in the composite motor case could be quantitatively measured. The defects detected in the composite motor case were in agreement with the results measured with the computed tomography and video microscope. This paper was described about the development process of the defect analysis program to convert the ultrasonic test data into the C-Scan image.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.2
• /
• pp.40-47
• /
• 2008

It is known that the adhesive interface testing of the rocket motor using the ultrasonic wave is superior to the other testing methods about the ability to economical detect the defects. But, the signal analysis of the ultrasonic wave takes a lot of time and efforts because the time interval of the transmitted pulse and the received pulse is too short to separate the reflected signals due to the multi-layers of the rocket motor. The ultrasonic testing of rocket motor have only applied to the automatic system about extremely limited areas like the debond in adhesive interface between the motor case and the insulator. In this study the new technique to detect the debond between the liner and the propellant using the property of the resonance and the lamb waves instead of the existing ultrasonic testing was described.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.872-878
• /
• 2003

In this paper, we developed a simulator which can generate the polarization waves for the indoor wireless communications based on three dimensional ray tracing technique and verified the simulation results comparing with the measured data in indoor wireless propagation environments. Using the developed simulator, we analyzed the channel characteristic and polarization diversity reception characteristic for the vertical, horizontal and circularly polarized waves. From the analysis results, in the case of using circularly polarized wave it can be clearly seen that the multipath fading is markedly reduced compared to the vertical and horizontal polarized waves due to the reception characteristic of removing the odd time reflected waves.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.350-356
• /
• 2012

The tension effect on fiber Bragg gratings was analyzed and the linearity of 1.24 nm/10kpsi was obtained when Bragg wavelength was varied within 3 nm by applied tension. Using tension control method, different center wavelength fiber Bragg grating(FBG) were fabricated by only single period phase mask. These serially connected four FBGs showed the transmission spectrum of 1.5 nm linewidth as a 3 dB bandwidth which was twice that of a conventional FBG.