• Fire Science and Engineering
• /
• v.30 no.3
• /
• pp.79-85
• /
• 2016

Serious electrical problems, such as shorts, ground faults, or circuits, often cause fire events in the fire proof zone of nuclear power plants. These would be directed to the loss of safe shutdown capabilities performed by safety-related systems and equipment. The fire event can be treated with the basic design principle that safety systems should maintain their functions with redundancy and independency. In the case of a cable fire in the main control room, operators cannot perform their mission properly and can misjudge the situation because of spurious operation, incorrect indication or instrument. These would deteriorate the plant capabilities of safety shutdown and result in disastrous conditions. Therefore, during a main control room fire, 5 minutes of operator action time is very important to operate the safety shutdown components. This paper describes the cable functional failure temperature criteria and conducted a cable functional failure time evaluation using Fire Dynamic Simulator to obtain the operator action time for a main control room fire.

• Journal of Animal Environmental Science
• /
• v.7 no.3
• /
• pp.183-190
• /
• 2001

The objective of this research was to design and construct an image processing system to measure easily and accurately cow's weight. The image processing system was built for a dairy cattle to be measured and estimated it's weight using camera and personal computer. The pixel numbers, which was derived from the image processing system, were counted to estimate the weight of a dairy cattle. They were utilized various was for finding the relationships between pixel numbers and it's real weight. Based on the results of this research the following conclusions were made: 1. It's weight could be estimated by using pixel numbers, which was captured from top and side cameras to measure it. The correlations with tea-view pixel numbers, side-view pixel numbers, superficial area pixel numbers and the volume pixel numbers were 0.909, 0.939, 0.944 and 0.965. 2. 50 cattle was used to execute an experiment with the image processing system, but average errors were big to make out the good relationship between cow's weight and pixel numbers. In order measure accurately a cattle weight, cattle weight, cattle groups would be divided by the age of cattle and further study should be carried out to be based on the results of this research. 3. The average time it took to perform the image processing to be measure it was 10 seconds, but it took 10 minutes for cattle to enter for measuring it's weight into the weighting system.

• Korean Journal of Optics and Photonics
• /
• v.30 no.6
• /
• pp.226-229
• /
• 2019

We investigated an interrogation system for fiber Bragg gratings by using a 50-GHz 96-channel array waveguide grating. Linearity of the sensitivity (the wavelength shift in response to the change in strain or temperature) is achieved for a Bragg grating of sufficiently wide bandwidth. The present wavelength-monitoring system could measure the change in Bragg wavelength with a resolution of 0.01 nm, at intervals of 10 seconds. When this interrogation system was used for a linear array of 12 acrylaterecoated fiber gratings, the wavelength sensitivity changed from 0.018 nm/℃ to 0.01 nm/℃ when the operating temperature changed from -25℃ to 85℃.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1933-1940
• /
• 1997

The development of CMOS IC chip and external system with optical transmission sytem is proposed in this paper, which deal with 4 subject 4 channel biological signals, receive and transmit biological signals to the external system using LED and infrared light of photodiode. This system decreases the dependency of power supply voltage to the COMS IC chip. A newenforce synchronization technique using infrared bi-directional communication has ben proposed. The telemetner IC with the size of $5.1{\times}5.1mm^2$ has the followingfunctions:receiving of command signal, initialization of internal state of all functional blocks, decoding of subject selection signal, time division multiplexing of 4-channel modulated biological signals, transmission of modulated signals to external system, and auto power down control. To confirm the total telemetry system, electrocardogram is transmitted and received to the external system using optical link.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.31-39
• /
• 2007

In this paper, a system for real-time or periodic measurement and analysis of RF parameters such as forward transmit power and pilot power in CDMA base station systems is proposed. Such RF characteristic parameter measurement can be prevented from system fault and used to achieve optimal service quality and maximum investment return through cell coverage expansion, subscriber capacity increase and so on. For forward power measurement, the local oscillator frequency for the detector is varied so that the transmit power for all channels can be measured. The channel power measurement can be used to analyze the variation in transmit power for changes in voice traffic. By comparing to forward $E_c/I_o$, the pilot channel power can be deducted, which can be used to determine uy degradation in transmit section modules such as the high dover amplifier. Since an accurate analysis of carefully measured data using the CDMA level detector must be made, the system is designed so that measurement errors due to changes in crest factor with modulation method can be overcome.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.4
• /
• pp.313-319
• /
• 2017

Fiber optics sensors that have been mainly applied to aerospace areas are now finding applicability in other areas, such as transportation, including railways. Among the sensors, the fiber Bragg grating (FBG) sensors have led to a steep increase due to their properties of absolute measurement and multiplexing capability. Generally, the FBG sensors adhere to structures and sensing modules using adhesives such as an epoxy. However, the measurement errors that occurred when the FBG sensors were used in a long-term application, where they were exposed to environmental thermal load, required calibration. For this reason, the thermal curing of adhesives needs to be investigated to enhance the reliability of the FBG sensor system. This can be done at room temperature through cyclic thermal load tests using four types of specimens. From the test results, it is confirmed that residual compressive strain occurs to the FBG sensors due to an initial cyclic thermal load. In conclusion, signals of the FBG sensors need to be stabilized for applying them to a long-term SHM.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.2
• /
• pp.101-107
• /
• 2009

Investigation of resaturation and thermal-hydro-mechanical behavior for the buffer of a repository requires measuring the water content of compacted bentonite. This study investigated the relative humidity of compacted bentonites using a humidity sensor (Vaisala HMT 334) applicable under high temperature and pressure, and then conducted a multi-regression analysis based on the measured results to determine relationships among the water content, relative humidity, and temperature. The relationships for the compacted bentonites with the dry densities of 1,500 $kg/m^3$ and 1,600 $kg/m^3$ were expressed as ${\omega}=0.196RH-0.029T+1.391({r^2=0.96)}$ and ${\omega}=0.199RH-0.029T+2.596({r^2=0.98)}$, respectively. These were then used to interpret the resaturation of bentonite blocks in the KENTEX test.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.133-133
• /
• 2023

풍화작용에 의해 생성된 유사는 자연 매체에 의해 이동하고 하천에 도달하기 이전이나 이후 퇴적되며, 해당 과정 중에서 하상변동, 홍수위 상승, 제방 안정성, 두부 침식, 생태환경 변화, 수질문제 등 다양한 침식과 퇴적 관련 문제들이 발생한다. 이러한 유사 문제의 해결과 지속적인 하천관리를 위해서는 유사의 생성, 이송, 그리고 퇴적 과정에 대한 충분한 이해와 정량적인 유사량을 파악하는 것이 필수적이다. 다양한 연구들을 통해서 유사량을 정량적으로 파악하기 위해 여러 종류의 모델과 공식들이 제안 되어져 왔다. 그 중 경험적 모델의 경우 실제로 관측된 값을 기반으로 하며, 복잡한 계산이나 요구하는 자료가 다른 종류의 모델들 보다 적어 쉽게 접근이 가능하다. 이러한 경험적 모델은 유사에 영향을 주는 인자를 규명하거나 특정 유역이나 지역에서 이송 및 퇴적 되는 유사의 출처와 특성을 규명하는 초기 단계에서 유용하게 이용된다. 국내 하천의 경우 여름에 강우가 집중되고 대부분의 국토가 산지로 이루어져있어 상류에서 침식이 주로 발생한다. 또한, 본류 및 하류 지역의 하천은 유사의 퇴적이 주로 일어나서 하천의 형태와 물길이 형성된 충적 하천 형태로 발전 되어있기 때문에 국내 하천에서는 전반적으로 국부적이며 다양한 형태의 유사 관련 문제가 발생한다. 국내 하천에서 발생하는 유사 관련 문제를 해결하기 위해 국내 하천의 유사량을 추정하는 다양한 경험적 모델들이 지속적으로 개발되어왔다. 하지만 과거에 개발된 모델들의 경우 계측 자료가 충분하지 않은 시기에 개발 되었으며, 현재에는 활용하기 불가능하다. 본 연구에서는 국내 하천의 비유사량을 예측하는 동시에 국내 하천의 유사 특성을 이해하기 위해 과거에 국내 하천을 대상으로 비유사량을 추정하기 위해 개발되었던 경험적 모델을 개선하였다. 본 연구를 통해 기존 경험 모델의 경우 주기적인 업데이트가 필요함을 확인하였으며, 개발된 모델의 경우 국내 하천 유사 관리를 위해 미래 유사량 예측하는 등 다양한 방면으로 활용 관리가 가능할 것으로 보인다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.428-428
• /
• 2023

글로벌 위성 기반의 강수량 관측에 대한 역사는 1979년에 Arkin의 의해 제안된 IR(Infra-Red) 방법에 의해 위성으로부터 강우자료를 유도하는 개념이 도입된 이후 1987년 해양에서의 비교적 정확한 강수량 추정이 가능한 다중 채널의 마이크로파(MW) 복사계를 이용한 방법에서 1997년TRMM(Tropical Rainfall Measurement Mission)위성의 PR(Precpipitation Radar)의 레이더를 이용하는 방법, 그리고 2014년 GPM(Global Precipitation Measurement Mission) 핵심 위성(GPM Core Observatory)에 탑재된 Dual PR에 의한 방법으로 위성강수의 정확도를 매우 높여가고 있다(Kim et al. 2013). 한국과 아세안의 경제협력이 증가하면서 국내 ODA 정책에서 아세안은 가장 우선적인 대상이 되었다. 정부는 2011-2015년 기간에 라오스 등 26개 국가를 중점협력국에 포함시켰고, 2021~2025년간 적용될 제3기 중점협력국에 라오스를 포함하고 있다. 본 연구는 위성영상으로부터 유도된 위성강수 자료를 이용하여 라오스의 남능강 유역에 대한홍수량을 추정하는 것을 목적으로 하였다. 분석자료인 위성강수 자료는 GSMaP 위성강수 자료를 이용하였다. 이 자료는 1시간의 시간해상도와 0.1°의 공간해상도를 갖는다. 라오스 남능강 유역 9개 지점의 2019년 8월~9월까지의 총강수량 비교 결과 9개 지점의 1일 관측강우의 경우 유역내 평균 약 699.2mm였고, 위성강수는 425.4mm로 위성강수가 과소추정되는 결과를 보이고 있으나 두 자료간의 결정계수(r²)는 약 0.79의 정확도를 보이는 것으로 분석되었다. 위성강수를 이용한 홍수량 분석 결과 같은 시기에서 남능강 유역 출구점의 첨두유출량은 약 5,786m³/s로 분석되었다. 분석도구는 한국건설기술연구원에서 개발하여 운영중인 GRM 강우-유출 모형을 이용하였다. 향후 위성강수와 지점강수의 조합에 의한 다운스케일링 기법에 대한 연구를 수행하여 계측자료가 부족한 지역에서의 홍수량을 분석하는 연구를 진행할 계획이다.

• Journal of agricultural medicine and community health
• /
• v.39 no.1
• /
• pp.25-36
• /
• 2014

Objectives: The objective of this study was to investigate the relationship between coronary artery calcification and risk factors of cardiovascular disease with multidetector computed tomography. Methods: Data were collected from 5,899 males between 30 and 59 years old by interview, survey, physical examination, blood test, and multidetector computed tomography in the university hospital from January 2010 to December 2011. We confirmed the coronary artery calcium scores of subjects by multidetector computed tomography and identified risk factors of cardiovascular disorders. We investigated the relationship between coronary artery calcification and risk factors of cardiovascular disorders. Results: Mean calcium score of the coronary arteries in 5,899 participants was 8.20, and 773 participants (13.1%) exhibited coronary artery calcification. The presence of coronary artery calcification was correlated to risk factors of cardiovascular disease (age, blood pressure, triglyceride, HDL cholesterol, LDL cholesterol, glucose, Apolipoprotein A-1, Apolipoprotein B, body mass index, waist circumference) and risk assessment tools of cardiovascular disorders. Significant predicted factors of coronary artery calcification had different patterns in each age group (30-39, 40-49, 50-59 years old). Conclusions: We confirmed the relationship between coronary artery calcification and either typical risk factors of cardiovascular disease or risk assessment tools of cardiovascular disease. In addition, we also observed that the pattern of these factors varied according to age. Therefore, age-related variation needs to be considered in management strategies to prevent cardiovascular disease.