• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.3
• /
• pp.68-74
• /
• 2001

In the drawing of large size automotive panels, elastic deflection of die components is induced by the contact force between them. The deflection is nonuniform and locally distributed, and results in nonuniform material flow. In order to arrange such a nonuniform die gap, a correcting operation, so called die spotting, is inevitable, which requires trial and error works and consuming time. A prediction of the bending deflection prior to a try-out must be useful to reduce the die spotting time. In this study, drawing process of a front fender is simulated first. and the deflection of the blank holder is calculated from the contact force imposing on th blank holder. The balance block heights ensuring a uniform deflection are optimized by the analysis and design of experiments.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.249-254
• /
• 2000

The contact forces between die components for the drawing of large size automotive panels introduce elastic deflections of the die components. Due to the deflections, the gap between blank holder and die varies locally resulting in nonuniform material flow. Such a nonuniform die gap usually requires correcting operation, so called die spotting, which is time consuming trial and error process. To reduce the die spotting time, the optimization of the blank holder bending deflection is needed. In this paper, we implemented an analysis procedure to predict the blank holder deflection. The analysis procedure and design of experiments techniques are applied to the optimization of balance block heights. The optimization results can be used as guidelines in actual die spotting process.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.1
• /
• pp.83-89
• /
• 2009

In most multi-stage forging processes, the die spotting process or alignment of punch and die depends on the manual operation. It results a very tedious and inefficient procedure, thus the proper measurement system is needed to improve productivity and accuracy. This paper proposes a measurement system for alignment of die and punch which has a cylindrical holder, and describes the system concepts using 3 eddy-current displacement transducers and precise measurement jig. In order to apply this measurement system to real situations, the measuring procedures and system calibration method, etc. are proposed. Finally, the accuracy and productivity of this measurement system are investigated in this paper.

• 대한공업교육학회지
• /
• v.41 no.1
• /
• pp.1-21
• /
• 2016

The purpose of this study is to analyze job of die and mold makers for apprenticeship education of specialized high school using DACUM method. The contents of this study were to identify the duties, specific tasks performed and the level of importance, difficulty, frequency and entry level on each task. This study also make out a DACUM chart of die and mold makers for apprenticeship education of specialized high school. The DACUM committee, which consisted of one facilitator, nine die and mold experts, one recorder and one coordinator, was established to conduct DACUM. The conclusions are as follows; First, this study defines a die and mold makers as 'a person who make it possible to manufacture/assemble/inspect die and mold parts using various machine tool'. Second, duties in job of die and mold makers for apprenticeship education were total 12 and total tasks in job of die and mold makers for apprenticeship education were 86. Third, this study determine the level of importance, difficulty, frequency and entry level about each task. Finally, this study make out a DACUM chart of die and mold makers for apprenticeship education of specialized high school based on the results of DACUM job analysis. And knowledge, skills, tools, and positive behaviors, future trends/concerns about die and mold makers for apprenticeship education of specialized high school were presented.