• Annual Conference of KIPS
• /
• 2023.05a
• /
• pp.137-139
• /
• 2023

양자 컴퓨터가 현대 암호 시스템의 보안성을 위협하고 있음에 따라, 최근 잠재적인 양자 공격들에 대한 분석 연구들이 다수 발표되고 있다. 공개키 암호인 RSA와 ECC의 경우, Shor 알고리즘에 의해 다항시간 내에 해결됨으로써 보안성이 완전히 붕괴되는 반면, 대칭키 암호는 Grover 알고리즘에 의해 보안 강도가 제곱근으로 감소하기 때문에 키 길이를 증가시킴으로써 기존 보안성을 복구할 수 있다. 이론적으로 Grover 알고리즘은 보안성을 훼손시키지만, 현실적인 공격 난이도가 매우 높음에 따라 대상 암호에 대한 양자 회로 최적화 구현이 중요하다. 이에 본 논문에서는 블록암호 RC5를 양자 회로 상에서 최적화하고 이를 기반으로 Grover 공격 비용을 추정한다. 마지막으로, 추정한 비용을 NIST의 양자 후 보안 강도 평가와 함께 비교함으로써 RC5에 대한 양자 암호 분석을 수행한다.

• Annual Conference of KIPS
• /
• 2023.05a
• /
• pp.253-255
• /
• 2023

스마트 시티는 수많은 기기에서 데이터를 수집한다는 점에서 보안적인 관점에서 취약점이 존재한다. 이러한 문제점을 해결하기 위해 블록체인의 감사 가능성, 투명성, 불변성 및 탈중앙화와 같은 특징을 활용하여 스마트 시티의 보안 취약점을 보완하는 연구가 다수 진행되고 있다. 대표적으로 자율 주행 자동차에 블록체인을 적용함으로써 보안 문제를 해결하였다. 이 외에도 다양한 적용 사례가 존재하였으며 스마트 시티에 블록체인이 적용가능함을 확인하였다. 하지만 블록체인을 적용시킴으로써 초기 투자 비용, 분산화로 인한 정책 충돌 등과 같은 문제점이 존재하였다. 향후 해당 문제점을 해결하기 위한 연구가 수행되어야할 것으로 사료된다.

• 한국벤처창업학회:학술대회논문집
• /
• 2023.04a
• /
• pp.141-144
• /
• 2023

우리나라 자동차산업에서의 정비서비스업은 After Market을 대표하는 중요한 업종이며, 상용트럭 또한 국가 물류와 건설현장에서 가장 큰 비중을 차지하고 있는 중요한 부문임에는 틀림이 없다. 본 논문의 목적은 상용트럭 딜러기업의 정비서비스분야에서 물리적 환경과 내부마케팅이 직원만족과 조직성과에 미치는 영향에 대한 영향력을 알아보는 것이다. 본 연구에서는 국내 및 수입 상용트럭 직영 및 딜러 종합정비업체 25개 직원들을 대상으로 하여 설문조사하고 실증 분석하였다. 주요한 연구결과는 다음과 같다. 첫째, 자동차 정비사업소의 물리적 환경은 직원만족에 긍정적 영향을 미치는 것으로 나타났다. 둘째, 내부마케팅은 직원만족에 긍정적 영향을 미치는 것으로 나타났다. 셋째, 직원만족은 조직성과에 유의한 정의 영향을 미치는 것으로 나타났다.

• Annual Conference of KIPS
• /
• 2023.05a
• /
• pp.119-122
• /
• 2023

양자 컴퓨터가 현대 암호 시스템의 보안성을 위협하고 있음에 따라, 최근 잠재적인 양자 공격들에 대한 분석 연구들이 다수 발표되고 있다. 공개키 암호인 RSA와 ECC의 경우, Shor 알고리즘에 의해 다항시간 내에 해결됨으로써 보안성이 완전히 붕괴되는 반면, 대칭키 암호는 Grover 알고리즘에 의해 보안 강도가 제곱근으로 감소하기 때문에 키 길이를 증가시킴으로써 기존 보안성을 복구할 수 있다. 이론적으로 Grover 알고리즘은 보안성을 훼손시키지만, 현실적인 공격 난이도가 매우 높음에 따라 대상 암호에 대한 양자 회로 최적화 구현이 중요하다. 이에 본 논문에서는 블록암호 RC5를 양자 회로 상에서 최적화하고 이를 기반으로 Grover 공격 비용을 추정한다. 마지막으로, 추정한 비용을 NIST의 양자 후 보안 강도 평가와 함께 비교함으로써 RC5에 대한 양자 암호 분석을 수행한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.10
• /
• pp.974-983
• /
• 2014

The commercialization of ITS(Intelligent Transport System) is in sight including V2V(Vehicle-toVehicle) communication and analysis of related electromagnetic circumstances is essential process in relevant legislation. However analysis including numbers of vehicles have electrically large environment which leads to a lack of computational resources. In this letter, we suggest superposition method which require much less computational resources by subgrouping environment and using post-processing of results. Suggested method approximate original result by superpositioning of analysis which include scatterers near source, observation point. This letter also presented guideline of method and example for comparison with full analysis result.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.1
• /
• pp.46-55
• /
• 2006

The purpose of this study is a development of an automatic mosaicing for applying to large number of airborne multispectral images, which reduces manual operation by human. 2436 airborne multispectral images were acquired from DuncanTech MS4100 camera with three bands; green, red and near infrared. LIDAR(LIght Detection And Ranging) data and GPS/INS(global positioning system/inertial navigation system) data were collected with the multispectral images. First, the multispectral images were converted to image patterns by unsupervised classification. Their patterns were compared with those of adjacent images to derive relative spatial position between images. Relative spatial positions were derived for 80% of the whole images. Second, it accomplished an automatic mosaicing using GPS/INS data and unsupervised classification. Since the time of GPS/INS data did not synchronized the time of readout images, synchronized GPS/INS data with the time of readout image were selected in consecutive data by comparing unsupervised classified images. This method realized mosaicing automatically for 96% images and RMSE (root mean square error) for the spatial precision of mosaiced images was only 1.44 m by validation with LIDAR data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6114-6118
• /
• 2013

This study examined the ultrasonic pulse reflection method(UPRM) for testing each ultrasonic pulse waveform model(UPWM) based on weld defects. The sharp crack of a clear signal was generated. The echo height of the defective probes changed according to the location. In a long crack in a circle around the defective probes, the Swivel scanning echo height when using the particle was reduced drastically. The peaks in the echo were thin because the needle was pointed. The porosity defects arising from a single echo was sharp and crisp, but a number of pores of the collective reflection overlapped and ajagged echo was observed. Slag, slag inclusions, cracks, and defects at the Swivel scan of each particle using the echo shape showed difference in the degree. Cracks were revealed as sudden changes in the echo height of the slag inclusions: increase ${\rightarrow}$ decrease ${\rightarrow}$ increase ${\rightarrow}$ decrease. In addition, the location of a number of defects in the dense pore geometry, such as a typical echo sundry, revealed the shape in the slag. Poor penetration of the defect echo, revealed the cracks to have a sharp-edged, crack-like shape with an echo.

• Journal of Korea Multimedia Society
• /
• v.10 no.8
• /
• pp.1004-1016
• /
• 2007

In this paper we proposed a Weight-Update-Control Adaptive Noise Canceller which improves speech when environmental noise is stationary and it is hard to acquire a reference signal. Adaptive Noise Canceller(ANC) needs a reference signal, but it is not easy to measure pure noise without voice for reference in factory. Because there are mixed various mechanical noise and workers' voice. Therefore ANC is not suitable to reduce background noise. So we proposed the method that uses an arbitrary constant as an input signal and inputs microphone signal to the reference signal. The noise is eliminated using updated weights in non-speech range. In speech range the weight is fixed and the modified voice is acquired then voice is restored through transversal filter. The proposed method is based on facts that the factory noise is stationary and the noise is not changed in short conversation range. As a result of simulation using MATLAB, we confirmed that the proposed method is effective for reducing factory noise and has high signal to noise ratio(SNR).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.11
• /
• pp.988-996
• /
• 2012

This paper presents a distributed task assignment algorithm for the suppression of enemy air defense (SEAD) mission of heterogeneous UAVs, based on the consensus-based bundle algorithm (CBBA). SEAD mission can be modeled as a task assignment problem of multiple UAVs performing multiple air defense targets, and UAVs performing SEAD mission consist of the weasel for destruction of enemy's air defense system and the striker for the battle damage assessment (BDA) or other tasks. In this paper, a distributed task assignment algorithm considering path-planning in presence of terrain obstacle is developed for heterogeneous UAVs, and then it is applied to SEAD mission. Through numerical simulations the performance and the applicability of the proposed method are tested.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12B
• /
• pp.735-742
• /
• 2007

We propose an effective packet marking algorithm for video streaming in DiffServ network. Because legacy packet markers such as srTCM(single rate three color marker) cannot distinguish the importance of packet, these markers can cause quality degradation of streaming during the network congestion period. Recently proposed TMS (Two Marker System) [4] shows effectiveness in such scenario that video streaming service is struggling with other types of service traffic. However, if many video streaming services co-exist in DiffServ network and result in competition among themselves, then both legacy packet markers and even TMS cannot prevent drastic streaming quality degradation. To cope with this, we suggest A-TCPM (Adaptive time sliding window Three Color Marker) algorithm. In this algorithm, an A-TCPM module decides the color of a racket based upon the probability which is lead by current channel status and frame importance ratio. Simulation results show that proposed A-TCPM algorithm can enhance streaming service quality especially when overbooked video streaming sessions struggle with themselves.