• Geophysics and Geophysical Exploration
• /
• v.21 no.2
• /
• pp.103-111
• /
• 2018

The recent research aim of seismic trace interpolation is to effectively interpolate the data with spatial aliasing. Among various interpolation methods, the Matching Pursuit interpolation, that finds the proper combination of basis functions which can best recover traces, has been developed. However, this method cannot interpolate aliased data. Thus, the multi-component Matching Pursuit interpolation and moveout correction method have been proposed for interpolation of spatially aliased data. It is difficult to apply the multi-component Matching Pursuit interpolation to interpolating the OBC (Ocean Bottom Cable) data which is the multi-component data obtained at the ocean bottom because the isolation of P wave component is required in advance. Thus, in this study, we dealt with an effective single-component matching Pursuit interpolation method in OBC data where P-wave and S-wave are mixed and spatial aliasing is present. To do this, we proposed the Ricker wavelet based single-component Matching Pursuit interpolation workflow with moveoutcorrection and systematically investigated its effectiveness. In this workflow, the spatial aliasing problem is solved by applying constant value moveout correction to the data before the interpolation is performed. After finishing the interpolation, the inverse moveout correction is applied to the interpolated data using the same constant velocity. Through the application of our workflow to the synthetic OBC seismic data, we verified the effectiveness of the proposed workflow. In addition, we showed that the interpolation of field OBC data with severe spatial aliasing was successfully performed using our workflow.

• Economic and Environmental Geology
• /
• v.44 no.3
• /
• pp.229-238
• /
• 2011

S-wave, which provides lithology and pore fluid information, plays a key role in estimating gas-hydrate saturation. In general, P- and S-wave velocities increase in the presence of gas-hydrate and the P-wave velocity decreases in the presence of free gas under the gas-hydrate layer. Whereas there are very small changes, even slightly increases, in the S-wave velocity in the free gas layer because S-wave is not affected by the pore fluid when propagating in the free gas layer. To verify those velocity properties of the BSR (bottom-simulating reflector) depth in the gas-hydrate prospect area in the Ulleung Basin, P- and S-wave velocity profiles were derived from multi-component ocean-bottom seismic data which were acquired by Korea Institute of Geoscience and Mineral Resources (KIGAM) in May 2009. OBS (ocean-bottom seismometer) hydrophone component data were modeled and inverted first through the traveltime inversion method to derive P-wave velocity and depth model of survey area. 2-D multichannel stacked data were incorporated as an initial model. Two horizontal geophone component data, then, were polarization filtered and rotated to make radial component section. Traveltimes of main S-wave events were picked and used for forward modeling incorporating Poisson's ratio. This modeling provides S-wave profiles and Poisson's ratio profiles at every OBS site. The results shows that P-wave velocities in most OBS sites decrease beneath the BSR, whereas S-wave velocities slightly increase. Consequently, Poisson's ratio decreased strongly beneath the BSR indicating the presence of a free gas layer under the BSR.

• Geophysics and Geophysical Exploration
• /
• v.2 no.4
• /
• pp.209-214
• /
• 1999

A field experiment generating shear waves by trench method was conducted at two places in Taejun area. We were able to separate the P- and S-waves by summing and subtracting the vertical and horizontal component of the data recorded at a three component downhole geophone in the borehole. The analysis of the records revealed that the shear waves were polarized to NS and EW directions. The faster shear waves were polarized to NS direction. The NS direction generally agrees with the dominant joints direction observed from the cores collected from the borehole.

• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.863-871
• /
• 2004

Analyses of residual pesticides in raw materials used for dietary supplements were performed using multi-ingredients simultaneous analysis method. Pesticides such as BHC, chlorpyrifos, and quintozene were detected in 12 domestic and 7 imported samples, suggesting need for monitoring pesticides in domestic and imported raw materials and establishing residual limit of each pesticide.

• Nuclear Engineering and Technology
• /
• v.19 no.2
• /
• pp.85-98
• /
• 1987

To analyze the aerosol dynamics in severe accidents of LMFBR, a new computer code entitled MCAD (Multicomponent Aerosol Dynamics) has been developed. The code can treat two component aerosol system using relative collision probability of each particles as sequences of accident scenarios. Coagulation and removal mechanisms incorporating Brownian diffusion and gravitational sedimentation are included in this model. In order to see the effect of particle geometry, the code makes use of the concept of density correction factor and shape factors. The code is verified using the experimental result of NSPP-300 series and compared to other code. At present, it fits the result of experiment well and agrees to the existing code. The input variables included are very uncertain. Hence, it requires uncertainty and sensitivity analysis as a supplement to code development. In this analysis, 14 variables are selected to analyze. The input variables are compounded by experimental design method and Latin hypercube sampling. Their results are applied to Response surface method to see the degree of regression. The stepwise regression method gives an insight to which variables are significant as time elapse and their reasonable ranges. Using Monte Carlo Method to the regression model of LHS, the confidence level of the results of MCAD and their variables is improved.

• Geophysics and Geophysical Exploration
• /
• v.18 no.2
• /
• pp.74-84
• /
• 2015

To yield physically meaningful images through elastic reverse-time migration, the wavefield separation which extracts P- and S-waves from reconstructed vector wavefields by using elastic wave equation is prerequisite. For expanding the application of the elastic reverse-time migration to anisotropic media, not only the anisotropic modelling algorithm but also the anisotropic wavefield separation is essential. The anisotropic wavefield separation which uses pseudo-derivative filters determined according to vertical velocities and anisotropic parameters of elastic media differs from the Helmholtz decomposition which is conventionally used for the isotropic wavefield separation. Since applying these pseudo-derivative filter consumes high computational costs, we have developed the efficient anisotropic wavefield separation algorithm which has capability of parallel computing by using GPUs (Graphic Processing Units). In addition, the highly efficient anisotropic elastic reverse-time migration algorithm using MPI (Message-Passing Interface) and incorporating the developed anisotropic wavefield separation algorithm with GPUs has been developed. To verify the efficiency and the validity of the developed anisotropic elastic reverse-time migration algorithm, a VTI elastic model based on Marmousi-II was built. A synthetic multicomponent seismic data set was created using this VTI elastic model. The computational speed of migration was dramatically enhanced by using GPUs and MPI and the accuracy of image was also improved because of the adoption of the anisotropic wavefield separation.

• The Korean Journal of Pesticide Science
• /
• v.12 no.4
• /
• pp.323-334
• /
• 2008

This experiment was carried out to analyze for pesticide residues in 17 different types of the special of geographical indication. We purchased 3 cereal grains, nuts and seeds, 3 fruits, 8 vegetables, mushrooms and other plants (Korean medicines) mainly at the agricultural cooperative's joints markets. Total 209 pesticides including multi-analysed pesticides (204) and single-analysed pesticides (5 ; acephate, methamidophos, monocrotophos, omethoate, vamidothion) were analysed with a GC/MS/MS, an HPLC/UVD (PDA) and a GC/FPD. No. 83 method and single-analysed method (Screening of multi-pesticide residue in the special products of geographical indication) of Korea Food Code was selected for validation in recovery and interferences of matrice. The results were as follows: among the selected 17 the special products, the residual pesticides were detected in 8 types of the special products (40 in 302 samples, detection ratio; 13.2%). All of the samples were not detected over MRLs, but tebuconazole, procymidone and isoprothioran were detected with considerable high frequency. These results could be used as KFDA official methods for the analysis of pesticide residues in foods and reference data will be provided to the related institutions.

• Journal of Food Hygiene and Safety
• /
• v.25 no.2
• /
• pp.192-202
• /
• 2010

Pesticide residues were investigated in 16 commodities (rice, foxtail millet, buckwheat, kidney bean, peanut, sesame, orange, grapefruit, kiwifruit, spinach, perilla leaves, leek, garlic stem, garlic, ginger and oak mushroom) collected from 22 provinces (Seoul, Busan, Incheon, Daegu, Daejeon, Gwangju, Ulsan, Suwon, Seongnam, Goyang, Bucheon, Yongin, Cheongju, Jeonju, Jeju, Cheonan, Changwon, Pohang, Gumi, Jinju, Wonju and Yeosu) in 2009. Pesticides (172 kinds) were analyzed using multiresidue method by GC/MS/MS from 510 samples, and phenthoate in kiwifruit was violated by exceeding MRL. The intake assessment for 24 kinds of pesticide residues including the detected pesticides at multi pesticide residue monitoring (bifenthrin etc.) were carried out. The result showed that the ratio of EDI (estimated daily intake) to ADI (acceptable daily intake) was 0.000007~0.458% which means that the detected pesticide residues were in a safe range so that residual pesticides in the agricultural products in Korea.