• 소성∙가공
• /
• 제24권4호
• /
• pp.234-240
• /
• 2015

Multi-pass shape drawing is very important to produce steel profiles in round samples. In the current study, a process design system is developed for a multi-pass shape drawing. In general, the number of passes for a multi-pass shape drawing is 2 to 3 when the reduction ratio, drawing stress, and productivity are considered. Therefore, calculating the drawing stress and designing the intermediated die shapes are very important. In order to calculate the drawing stress, a shape drawing load prediction method is proposed using a general axisymmetric drawing load prediction model. An intermediate die shape design method is proposed using the initial and the final product shapes. Based on this analysis, a process design system is developed for multi-pass shape drawing for steel profiles. The system works with AutoCAD. The system was applied to design a shape drawing of a spline.

• 터널과지하공간
• /
• 제11권4호
• /
• pp.328-338
• /
• 2001

Fiber Glass Tube(FGT) 또는 steel pipe를 이용한 터널막장의 수평보강공법 그리고 강관다단공법 등은 터널 굴착시 터널막장의 안정성이 확보되지 못할 경우에 흔히 사용된다. 그러나 이러한 공법이 사용된 터널의 역학적 거동은 아직 충분히 알려진 바가 없으며, 따라서 설계와 전산해석 과정에서 경험에 의존하는 경우가 많고 공법의 합리적인 적용이 어려운 실정이다. 본 연구에서는 복합체 역학을 이용한 보강공법의 전산해석 단순화 방법의 적용성을 검증하였고, 강화지반의 등가탄성계수는 평균장 이론과 변형률 에너지 이론을 사용하여 도출하였다. 다양한 보강패턴에 따른 터널막장의 거동에 관한 매개변수 연구를 수행하였다.

• 전자공학회논문지S
• /
• 제34S권1호
• /
• pp.80-93
• /
• 1997

This paper proposes a new technique of optimal codebook design in multistage gain-shape vector quantization (MS-GS VQ) for wireless image communication. An original image is divided into a smany blocks as possible in order to get strong robustness to channel transmission errors: the original image is decomposed into a number of subband images, each of which contains a sperate spatial frequency information and is obtained by the biorthogonal wavlet transform; each subband is separated into several consecutive VQ stages, where each stage has a residual information of the previous stage; one vector in each stage is divided into two components-gain and shape. But, this decomposition genrates too many blocks and it thus makes the determination of optimal codebooks difficult. We overcome this difficulty by evolving each block's codebook independently with different genetic algorithm that uses each stage's individual training vectors. Th eimpact of th eproposed VQ technique on the channel transmission errors is compared with that of other VQ techniques. Simulation results show that the proposed VQ technique (MS-GS VQ) with the optimal codebook designe dy genetic algorithms is very robust to channel transmission errors even under the bursty and high BER conditions.

• 한국정보통신학회논문지
• /
• 제13권2호
• /
• pp.362-368
• /
• 2009

SA 필터는 선형 필터와 순서통계에 기초한 비선형 필터의 특성을 모두 포함하는 광범위한 필터 군으로 소개되었으며, 필터의 구조는 다단 필터의 형태로 첫째 단를 이루는 부 필터(sub-filter)의 종류에 따라 SAMAX, SAMIN, SAMED, SAXOR 필터로 불린다. 본 논문에서는 비대칭 노이즈 환경에서 최적 SAMAX 필터와 SAMED 필터를 설계하고 영상신호에 대하여 적용함으로써 그 성능을 비교 분석 하였다. 실험 결과 대칭 노이즈에서는 두 필터의 성능이 동일하지만 비대칭 노이즈에서는 SAMAX 필터가 SAMED 필터 보다 우수한 성능을 가진다는 사실을 보여주었다. 이러한 새로운 사실은 SA 필터의 응용에서 기초적인 지침으로 활용될 수 있을 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1417-1422
• /
• 2003

An electrical cascade impactor is a multistage impaction device to separate airborne particles into aerodynamic size classes using electrical method. We designed a real-time three-stage electrical low-pressure impactor, which is proper to nanometer sized environmental aerosols. Performance evaluation was carried out for stage 1 and 2. The monodisperse liquid dioctyl sebacate (DOS) particles were generated using condensation-evaporation followed by electrostatic classification using DMA (differential mobility analizer) for particles with diameters in the range of $0.04{\sim}0.8{\mu}m$. The evaluation of the electrical impactor is based on the use of two electrometers, one connected to the impaction plate of the impactor, and the other to the faraday cage as backup filter. The results showed that the experimental 50% cutoff diameters in the operation pressure were 0.53 and $0.12{\mu}m$ for stage 1 and stage 2. The effect of operation pressure on the cutoff diameter and the steepness of collection effcieicy curves is investigated.

• 한국추진공학회지
• /
• 제15권2호
• /
• pp.50-55
• /
• 2011

고성능 로켓엔진에 사용되는 다단연소싸이클의 주요 부품인 예연소기 개발 과정에서 브레이징 접합부를 모사하는 시편에 대한 강도 시험을 수행하고 유한 요소 해석 결과와 비교하였다. 진공 브레이징 되는 헤드의 산화제 분사기 및 진공 가압 브레이징되는 냉각채널 접합부를 모사할 수 있는 시편을 설계 및 제작하고 파단 시험을 수행하였다. 두 시편 모두 접합부가 아닌 모재에서 파단이 발생하였다. 그리고 해석을 통하여 예측된 파단 부위와 변형율이 시험 결과와 잘 일치하였다.

• 한국정밀공학회지
• /
• 제28권3호
• /
• pp.301-307
• /
• 2011

In this paper, effects of major design parameters of cold forging dies on die mechanics are quantitatively investigated with emphasis on shrink fit using a thermoelastic finite element method. A ball-stud cold forging process found in a cold forging company is selected as a test process and the effects of die insert material, magnitude of shrink fit, dimension of shrink ring, number of shrink rings, partition of die insert and clamping force on effective stress and circumferential stress are analyzed. It has shown that the number of shrink rings, magnitude of shrink fit, and Young's modulus of die insert material have strong influence on compressive circumferential stress in die insert but that the influence of the other design parameters is relatively weak.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.637-641
• /
• 2007

화석연료의 고갈이 가시화됨에 따라 이를 해결하기 위한 대체에너지원의 확보를 위해 다양한 연구가 수행되어 왔다. 본 연구에서는 폐기물 특히 플라스틱 폐기물의 안정적인 처리 및 청정가스의 생산방법을 연구하기 위해서 선행적으로 플라스틱 폐기물의 열분해 특성을 조사하였으며, 그 반응모델을 제시하여 열분해로의 설계인자의 도출하고자 하였다. 대상 폐 플라스틱류로서 PE, PP, PVC, RPF 등을 이용하였고, 열중량분석기와 tube furnace를 통해서 온도에 따른 분해반응 특성을 확인하였다. 열분해 특성조사를 한 결과 PE, PP 등은 잔류 char가 없이 $400^{\circ}C$ 전후에서 완전 분해하였으며, PVC의 경우 $400^{\circ}C$ 이후에도 약 20% 이상의 char가 잔류함을 확인하였고, RPF의 경우에도 약 10%의 char이 잔류함을 확인하였다. 또한 각각의 열분해 특성을 DTG/TGA분석을 통해서 적정체류시간을 구할 수 있었고, 다단열분해 가스화기를 이용하여 합성가스를 제조한 결과 2500 kcal / $Nm^3$의 높은 발열량을 가진 합성가스를 제조할 수 있었다.

• 소성∙가공
• /
• 제18권4호
• /
• pp.283-289
• /
• 2009

The multi-stage shape drawing is used to obtain long shaped products with high levels of dimensional accuracy and quality. It is important to design the cross sectional shapes of the intermediate passes to meet the required dimensional accuracy of the final product in the multi-stage shape drawing. Until now, the cross sectional shapes of the intermediate passes have been designed by the experiences. It is still remained unsolved problem to design the cross sectional shapes of intermediate pass drawing dies in the multi-pass shape drawing. In this study, a new technique is proposed to design the cross sectional shapes of intermediate passes. The proposed method is applied to a multi-stage shape drawing for a LM-guide which is one of the representative shape drawing products. In order to verify the effectiveness of the proposed method, FE-simulation and experiments have been carried out. The dimensional accuracy of the proposed method is compared with that of the conventional shape drawing process designed by the industrial engineers.

• 소성∙가공
• /
• 제26권1호
• /
• pp.28-34
• /
• 2017

Multi-pass shape rolling is performed to produce long products of arbitrary cross-sectional shapes. In the past, the multi-pass shape rolling process has been designed by the trial and error method or the experience of experts based on the empirical approach. Particularly, the design of roll caliber in shape rolling is important to improve product quality and dimensional accuracy. In this paper, the caliber design and pass schedule of multi-pass shape rolling were proposed for manufacturing piston ring wire. In order to design roll caliber, major shape parameter and dimension was determined by analysis of various caliber design. FE-simulation was conducted to verify effectiveness of proposed process design. At first, forming simulation was performed to predict shape of the product. Then, fracture of the wire was evaluated by critical damage value using normalized Cockcroft-Latham criteria. The experiment was carried out and the results are within the allowable tolerance.