• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.243-247
• /
• 1997

기존의 복합 Turning Center 보다 비구심상태에서의 가공, 3축밀링가공 및 3축/4축 동시 Milling가공 등의 특징을 갖고 복잡한 형상과 기능을 갖도 있는 부품 생산용 각형 FMS/C의 기본기계가 될 다기능 복합가공기[최대가공경 310mm *최대가공길이600mm, 6축제어(4축동시가공), ATC Magazine 20개, 주축18.5KW, 제2주축 15KW 회전수36-1,600RPM의 강력, 고속, 정밀 다기능 복합가공기]를 제2차 선도기술개발사업을 통해 개발을 추진하고 있다.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1590-1594
• /
• 2007

This paper describes a case study on dynamic characteristics analysis of a 5-axis multi-tasking machine tool of ram-head typed. Natural frequency and corresponding vibration modes of the machine tool structure were obtained by using both FEM modal analysis and an experimental modal test(impulse hammer test). Both the theoretical and experiment analysis results showed good agreement with each other. Finally, some discussion and review, from the view point of resonance vibration and/or mode coupled chatter, were made based on the analysis results.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.2
• /
• pp.162-169
• /
• 2009

This paper describes a study on dynamic characteristics analysis and dynamic compliance evaluation of a 5-axis multi-tasking machine tool of ram-head type. Structural dynamics analysis and evaluation are necessary to machine tool design and development to secure good machine tool performance against tough and harsh machining conditions. In this study, natural frequencies and corresponding vibration modes of the machine tool structure were analyzed by using both F.E.M. modal analysis and impulse hammer test. Furthermore, dynamic compliance of the machine tool was analyzed by using F.E.M. and also measured by using a hydraulic exciter test. Both the theoretical analysis and experimental test results showed good agreement with each other.

• The Optical Journal
• /
• s.124
• /
• pp.28-32
• /
• 2009

초정밀 초고속 레이저 가공공정 및 장비는 유연소재의 태양전지, 인쇄전자소자(printed electronics devices)의 초고속 절단공정, 고기능 다기능 모바일 기기용 고부가 PCB의 초정밀 초고속 레이저 드릴링 및 복합 유연 가공 등에 적용된다. 최근 레이저 가공기 연구개발 패러다임은 레이저 의존형 장비 개발에서 레이저 맞춤형 장비 개발로 변화되고 있다. 즉, 수입된 레이저 발진기 및 광학기기를 사용하여 레이저 공정 및 장비를 개발하는 방식에서 벗어나, 개발하고자 하는 공정 및 장비에 최적화된 레이저 발진기 개발을 병행하는 것이다. 이러한 상황에서 최근 지식경제부 산업원천기술개발사업으로 신개념 레이저 기반 초정밀 초고속 가공시스템 개발이 착수되었으며, 본 고에서는 이에 대한 전반적인 내용들 소개하고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.215-219
• /
• 2000

In multi-purpose lathe, the design of tilting turret slide system has on important and critical role enhance accuracy of the machining process. Tilting turret unit is traveled by 3-axis slide systems. There is a need to design this part very carefully. In this research, 3-axis sliding system with tilting turret is modeled by considering the element dividing, material proprties, and boundary conditions using MSC/PATRAN. Mode and frequency analysis of each structures such as saddle, careg, and turret are simulated by MSC/MASTRAN, for the purpose of developing the effective design.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.203-206
• /
• 2000

In the multi-purpose lathe, the design of tilting turret slide system has an important and critical role to enhance the accuracy of the machining process. Tilting turret unit is traveled by 3-axis slide systems. There is a need to design this part very carefully. In this research, the 3-axis slide system with tilting turret unit is researched with two approaches; The first is that 3-axis slide system is modeled and simulated usig ADAMS software. The dynamic behavior of this system is visualized by data graphs and dynamic animations. The first step of virtual prototype which makes it possible to design economically and effectively is developed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.556-556
• /
• 2000

In the multi-purpose lathe, the design of tilting turret slide system has an important and critical role to enhance the accuracy of the machining process. Tilting turret unit is traveled by 3-axis slide systems. There is a need to design this part very carefully. In this research, the 3-axis slide system with tilting turret unit is researched with two approaches; The first is that 3-axis slide system is modeled and simulated using ADAMS software. The dynamic behavior of this system is visualized by data graphs and dynamic animations. The second is that the slide system is analyzed with the aspect of stress distribution. The slide system is modeled and displayed by PATRAN and analyzed by NASTRAN. The analysis of strain and stress distribution in the each node is prompted and visualized in the computer. The first step of virtual prototype which makes it possible to design economically and effectively is developed.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.5
• /
• pp.60-70
• /
• 2001

In multi-purpose lathe, the design of tilting turret slide system has an important and critical role to enhance accuracy of the machining process. Tilting turret unit is traveled by 3-axis slide systems. There is a need to design this part very carefully. In this research, 3-axis sliding system with tilting turret unit is modeled by considering the element dividing, material proprties, and boundary conditions with PATRAN. Normal mode and frequency analysis of each structures such as saddle, cared, and turret are simulated by NASTRAN, for the purpose of developing the effective design. The results of mode analysis and frequency analysis are visualized with PATRAN, and the design method which can solve the resornance problem by eigenvalues and eigenvectors of each axis is developed as well.