• Proceedings of the Korean Society for Quality Management Conference
• /
• 2004.04a
• /
• pp.239-247
• /
• 2004

본 논문은 진보된 다구찌 기법의 한 분야로 다구찌 박사가 90년대 후반에 제시한 마할라노스-다구치 기법(Maharanobis-Taguchi Method MTS)에 대한 개념의 소개와 적용사례에 관한 연구로 이미 미국, 일본에서는 많은 성공사례가 발표되어 현장에 활용되고 있지만 아직 국내에서는 그다지 알려지지 않았을 뿐만 아니라 활용사례가 없는 실정이다. 본 논문은 MTS기법의 소개와 적용사례 관하여 고찰해 봄으로써, 국내에도 MTS기법이 많은 분야에 도입 및 적용되어 활성화되는 밑거름이 되고자 한다.

• Aerospace Engineering and Technology
• /
• v.13 no.2
• /
• pp.177-184
• /
• 2014

Flight safety analyses concerned with Launch Vehicle are performed to measure the risk to the people, ship and aircraft using impact point and impact dispersion area of debris generated by on-trajectory failures and malfunction turns. Predictions of impact point and impact dispersion area are essential for launch vehicle's flight safety analysis. Usually, impact dispersion area can be estimated in using Monte-Carlo simulation. However, Monte-Carlo method requires more several hundreds of iterative calculations which requires quite some time to produce impact dispersion area. Herein, we check the possibility of applying JU(Julier Uhlmann) transformation and Taguchi method instead of Monte-Carlo method and we propose a best method in terms of compuational time to produce impact dispersion area by comparing the results of the three methods.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.9
• /
• pp.923-928
• /
• 2015

In this paper, we propose an ultrasonic magnetic abrasive polishing (US-MAP) technique to effectively machine a high-strength material, and we prove the efficiency of hybrid finishing. We use Taguchi's experimental method to determine the influence of each parameter. Based on the results, US-MAP exhibited a higher polishing efficiency than traditional MAP, and a suitable frequency for hybrid finishing was 28 kHz. When investigating the effect of the parameters on the surface roughness, the ultrasonic amplitude had the greatest effect. However, when machining with $55-{\mu}m$ amplitude, the machining efficiency decreased as the magnetic flux density varied.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.533-536
• /
• 2011

기어는 중요한 핵심 기계요소 중 하나로서 기계적 물성이 강화된 엔지니어링 플라스틱의 개발과 제품의 성능 향상 및 소형화, 경량화, 저소음화 등의 소비자 요구를 만족시키기 위한 노력에 편승하여 정밀도가 높은 플라스틱 기어에 대한 생산 요구가 증대되고 있는 실정이다. 본 논문에서는 시력 측정 장치인 자동굴절검사기용 디스크 기어에 대하여 변형을 최소화하기 위한 성형조건 최적화를 수행하였다. 사출 공정의 주요 공정변수를 사출온도, 충진시간과 보압압력, 금형온도로 정하고 다구치 방법에 의해 성형 해석으로 예측된 변형량을 분석한 결과 사출온도와 보압압력이 원판형 기어의 Z방향 변형에 가장 큰 영향을 미치는 것을 알 수 있었다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.1077-1084
• /
• 2003

The performance of simulated annealing (SA) algorithm such as solution optimality and computation time mainly depends on how to determine the SA-related parameters Several schemes have been suggested to improve the performance of SA and several parameter design methods have been utilized to select parameter values of each scheme. In this paper, we propose a new SA algorithm design method that can determine schemes as well as parameter values simultaneously The new SA algorithm design method is based on the Taguchl method which primarily selects the design parameters for a product or process to minimize the effect of noise parameters. so that the response is close to the desired target with minimum variation. To show the effectiveness of the proposed method, extensive computation experiments are conducted.

• Composites Research
• /
• v.26 no.3
• /
• pp.189-194
• /
• 2013

This paper deals with the study of mechanical properties and impact energy absorbed by composites, made by using thermoplastic and thermoset as matrix, flax fiber and nanoclay as reinforcements. The nanoclay was sprayed on the fiber laminate directly after mixing with ethanol. This experiment designed by Taguchi method and have variable factors, i.e three types of fiber direction(F), three different nanoclay wt%(N) and three spray gun hole shapes(S). According to these conditions, composites were made and the optimum conditions were found to be F1N3S1, F1N2S1, F1N2S1 and F3N2S1 for thermoplastic, and F1N3S2, F1N3S2, F1N2S2 and F3N2S1 for thermoset which were matched with tensile strength, modulus, total impact absorbed energy and heat release rate respectively.