• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.350-356
• /
• 2011

In this paper, we proposed the automatic cutting mechanism of the perforation pipes in an automobile muffler. This cutting mechanism makes continuous work possible, because it performs the batch work via the sequential operation of loading, feeding, cutting, and discharging. The proposed cutting mechanism consists of the frame unit, escape unit, turning unit, feeding unit, vision system, clamping unit, spindle/cutting unit and cooling unit. And, these mechanisms have been modularized through mechanical, dynamical and structural optimized design using the SMO (SimDesigner Motion) analysis module. Also, the virtual prototype was carried out using the 3-D CAD program. The cutting process cycle is performed in the order of loading, vision processing, feeding, clamping, cutting and discharging. And the cycle time for cutting one piece was designed to be completed in four seconds.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1225-1230
• /
• 2004

In this paper, the pressure drops were investigated according to the sintered porous wick structure in loop heat pipe(LHP) by theoretical analysis. LHP has the wick only in evaporator for the circulation of working fluid, so utilizes porous wick structure which pore diameter is very small for large capillary force. This paper investigates the effects of different parameters on the pressure drops of the LHP such as particle diameter of sintered porous wick, wick porosity, vapor line diameter, thickness of wick and heating capacity. Working fluid is water and the material of sintered porous wick is copper. According to the these different parameters, capillary pressure, pressure drop in wick were analized by theoretical design method of LHP.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.825-832
• /
• 1988

본 연구에서는 1차원 열흐름하에서 상부가 가열된 다공물질내의 열파이프 현 상과 관련하여 2상영역의 존재와 그 길이에 영향을 미치는 인자들을 실험적으로 관찰, 조사하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권4호
• /
• pp.358-367
• /
• 2013

본 논문에서는 타공판으로 구성된 필터의 전부 또는 일부를 다공성 매질로 대체하고 Forchheimer 법칙에 따라 판의 수직방향과 횡방향으로 손실계수를 부과하여 스트레이너를 지나는 유동의 압력 강하량를 정확히 예측할 수 있는 다공성모델링 기법을 적용하고 그 유효성을 확인하였다. 먼저 간단한 파이프 유동 해석을 통하여 수직방향 손실계수를 구하였다. 이어 필터 내에 반복되는 타공판 형상과 유동손실특성을 공유할 수 있는 단위주기 형상을 설정하고, 설정된 단위형상에 대하여 원형과 다공성모델 수치모사를 각각 수행한 후, 얻어진 두 결과를 서로 비교하여 횡방향 손실계수를 구하였다. 적용된 다공성모델링 기법을 검증하기 위하여 스트레이너 전체형상에 대하여 다공성모델 수치모사를 수행하였으며, 그 해석결과를 원형 수치모사 결과와 직접 비교하였다. 비교 결과, 다공성모델링 기법은 압력 강하량과 유동특성을 비교적 정확히 예측하였으며 계산비용과 직결되는 노드 수는 약 3~4배 정도 줄일 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.427-428
• /
• 2009

The authors investigated anomalous nanoporous structures of aluminum oxides during the Al anodization process. We implemented two-steps anodizing process for the electrolyte of oxalic acid. As increasing DC voltages, lattice constants are proportionally increased. For the curved surface, the surface electric field was distorted so that the nanoporous pipe channel changed to a cone-type shape. We confirmed the periodicity by using the FFT(Fast Fourier Transform) analysis.

• 설비공학논문집
• /
• 제13권1호
• /
• pp.18-24
• /
• 2001

Woven wire wick is very effective structure because of its easiness to insert inside of pipe for a miniature heat pipe. The present study was conducted to investigate the effect of the effective flow passage with respect to wire helix angle. Also effective thermal conductivity were examined by defining mean porosity considering effective liquid flow passages. Effective heat transfer area is varied with respect to wire helix angle, and in the range of $\thet=60~65^{\circ}C$, heat transfer area is decreased about 15~20%. Permeability of woven wire wick shows similar value of 200 mesh screen wick. And comparison of experimental results on effective thermal conductivity shows a fairly good agreement with the analytical results.