• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.979-990
• /
• 1989

Natural convection heat transfer has been investigated numerically in the vertical annulus filled withsaturated porous material for the aspect ratio less than unity. The inner wall of the annulus is exposed to constant heat flux condition and the outer wall is cooled to keep isothermal condition. The upper and the lower horizontal wall are assumed to be insulated. Under conditions ranging 50 .leq. Ra .leq. 10000, 1 .leq. RD .leq. 12, the characteristics of flow and heat transfer have been investigated. The results show that average Nusselt numbers increase when the radius ratio increases and the multicellular flows are not detected under the present conditions. Isothermal lines are plotted within the porous media. Temperatures of the inner wall with constant heat flux conditions and the local heat flux rate of the cooled outer wall with constant temperature are also obtained.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.3
• /
• pp.422-432
• /
• 2001

An analytical characterization is presented on the transient heat transfer by an oscillating flow through a porous slab. Based on a two-equation model, analytic solutions are obtained for both the fluid and solid temperature variations. Two parameters are identified as the Stanton number for the internal heat exchange and the ratio of the thermal capacities between the solid and fluid phases. The heat transfer characteristics are shown to be classified into four regimes according to the two parameters and physical interpretation is presented on the particular heat transfer processes within each regime. In addition, the condition for the local thermal equilibrium between the phases is examined and the relevant criterion is suggested.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.92.1-92.1
• /
• 2018

표면증강 라만 산란(Surface Enhancement Raman Scattering, SERS) 기판의 경우, 규칙적인 배열을 갖는 나노구조 및 나노패턴 기판과 금속 나노구조의 고밀도 패킹이 고감도 화학물질 검출에 중요하다. 또한 폭넓은 응용 가능성에도 불구하고 기판 제작의 비용이 높고 재현성이 떨어져 상용화에 어려움을 겪고 있다. 본 연구에서는 다공성 알루미나(Anodic Aluminum Oxide, AAO)를 사용하여 Ag 나노입자가 코팅된 나노기둥 배열(Nanopillar array)을 갖는 고분자 필름의 SERS-active 기판을 제작하여 공정비용을 낮추고, 대면적화로 생산성을 높이고자 한다. 다단계 양극산화 공정과 복제 기술을 통해 다양한 지름과 높이를 갖는 맥주병 형상의 나노기둥 배열을 제조하였고, aspect ratio가 2.3인 나노기둥 배열에서 최대의 SERS 신호 강도와 높은 재현성을 확인하였다. SERS 신호의 세기는 Ag 나노입자가 코팅된 나노기둥 배열의 열처리 온도와 분석 물질의 농도에 따라 비례하며 이를 바탕으로 정량적인 고감도 진단, 바이오 화학 물질 센서에 매우 적합함을 알 수 있다.

• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.1013-1023
• /
• 2003

This study was performed to improve water quality of stream by applying hydraulic structures (weir and river bed material) made of porous concrete. The physical and chemical characteristics of porous concrete were measured to estimate application possibility of it in hydraulic structures and it was considered as a proper material for the hydraulic structures. In the results of comparison for the component of matters attached on the hydraulic structures made of porous and ordinary concrete, DW (dry weight) amount attached on porous concrete was 1.6 times higher than that on ordinary concrete under the condition of the same flow rate but influence by flow rate (difference of 10 times) was not shown. Therefore, we could understand that the material of media was more important in DW amount than flow rate. The rate of AFDM (ash free dry mass) to DW also was more at porous concrete than at ordinary concrete. Especially, the high rates of nitrogen and phosphorous in matters attached on porous concrete verify that they were removed by assimilation, adsorption and metabolism of periphyton. The removal percentage of SS, BOD, COD, T-N and T-P by hydraulic structures applying porous concrete compared with ordinary concrete was increased by 34.6%, 36.9%, 33.9%, 18.3% and 21.6%, respectively. Therefore, applying porous concrete to hydraulic structure is expected to contribute to improvement of stream water quality.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.5
• /
• pp.218-224
• /
• 2015

Recently, removing methods of red tide has been attempted by filtering the organisms using the ceramic porous bodies. However, the marine biofouling could be developed on the surfaces of porous ceramic body after use for more than one month, and it might decrease the function of the specimen. In this paper, a method of inhibiting marine biofouling by changing the physical properties or surface-modification of ceramic porous body was studied. After experiment with six different ceramic porous bodies, it was found that the specimen of lower porosity and water absorption showed the least amount of biofouling. In addition, by increasing the surface roughness with silica particles bonded to the surface of specimen, the amount of biofouling caused by large marine life such as barnacle and mussel could be decreased. On the other hand, when the surface of specimen was coated and fused by glass powder, the amount of biofouling was rather increased. This might be due to eluted inorganic ions from the glass which can promote the growth of the microorganism. In conclusion, the environmental-friendly methods to reduce the amount of marine biofouling, such as controlling the physical properties and the surface roughness of the porous ceramics, can be possible without the use of dangerous substances. So it is expected for the results obtained to be applicable to a marine structure.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.759-764
• /
• 2018

3D porous carbon electrodes (cNPIM), prepared by solution casting of a polymer of intrinsic microporosity (PIM-1) followed by nonsolvent-induced phase separation (NIPS) and carbonization are presented. In order to effectively control the pore size of 3D porous carbon structures, cNPIM was prepared by varying the THF ratio of mixed solvents. The SEM analysis revealed that cNPIMs have a unique 3D macroporous structure having a gradient pore structure, which is expected to grant a smooth and easy ion transfer capability as an electrode material. In addition, the cNPIMs presented a very large specific surface area ($2,101.1m^2/g$) with a narrow micropore size distribution (0.75 nm). Consequently, the cNPIM exhibits a high specific capacitance (304.8 F/g) and superior rate capability of 77% in an aqueous electrolyte. We believe that our approach can provide a variety of new 3D porous carbon materials for the application to an electrochemical energy storage.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.46.1-46.1
• /
• 2009

산업이 점차 발달함에 따라 발생하는 환경오염으로 인해 인간의 삶에 있어 불가분의 관계에 있는 물에 대한 관심이 지속적으로 높아지고 있는 추세이다. 각종 질병의 요인이 되는 박테리아는 주로 물을 운송 매개체로 하기 때문에 이로 인한 물의 오염으로 인도의 경우 모든 질병 발생의 80%를 차지하는 것으로 세계보건기구(WHO)에 의해 보고되었다. 현재까지물 또는 공기의 항균 및 살균 정화를 위해 화학적, 생물학적 방식 등 다양한 기술이 개발되었으나 박테리아와같은 세균제거에는 무리가 있는 실정이다. 따라서 본 연구에서는 여러 물질 중에서도 특히 항균작용(Antibacterial activity)이 탁월한 은(Ag)을 나노입자화하여 in-situ 코팅을 통한 다공성 알루미늄 하이드록사이드 나노복합재의 제조함으로써 생물학, 생체의용공학, 약학 등에 응용될 수 있는 새로운 형태의 항균재료제조방법을 제안하였다. 우선, 다공성 알루미늄 하이드록사이드기판은 알루미늄 기판에 알칼리 표면개질을 실시함으로서 표면에 마이크로포어가 형성된 알루미늄 하이드록사이드 기판을 제조하였다. 이렇게 제조된 다공성 기판에 Polyol 공정으로 은나노입자를 합성 및 분산시킴으로서 in-situ로 은나노입자가 분산된 알루미늄 하이드록사이드 나노복합재 기판을 만들수 있었다. 본 연구를 통하여 제조된 은나노입자가 분산된 알루미늄 하이드록사이드 나노복합재 기판은 주사전자현미경(SEM) 및 투과전자현미경(TEM)을 통하여 미세구조와 상분석을 실시하였으며 X선 광전자분석(XPS)를 이용하여 기판 표면의 화학적 상태를 분석하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.503-503
• /
• 2013

유기발광소자는 기존의 디스플레이에 비해서 빠른 응답속도, 넓은 시야각과 높은 박막 특성으로 백색 조명 광원으로 많은 주목을 받고 있다. 특히 백색 조명 광원 관련 기술은 친환경 에너지와 관련해 주목을 받고 있어 연구가 활발하게 진행되고 있다. 백색 유기발광소자를 제작하기 위해서 청색과 황색의 발광층을 적층하는 방법은 유기물질의 계면에서의 불균일로 인한 효율 저하와 구동전압에 따른 재결합 구역의 변화로 색안정성이 나빠지는 문제점이 있었다. 본 연구에서는 고효율 및 높은 색안정성을 나타내는 백색 유기발광소자를 제작하기 위해 고분자/저분자 혼합 발광층 구조를 사용하였다. 고분자 poly (2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylenevinylene (MEH-PPV)와 polystyrene (PS) 혼합물을 스핀코팅하여 박막을 형성한 후, 열처리에 의한 상분리 현상을 이용하여 선택적으로 PS 물질을 제거한 후, MEH-PPV 적색 다공성 고분자 발광층을 형성하였고, 저분자 2-methyl-9,10-di (2-naphthyl) anthracene을 적색 다공성 고분자 발광층 위에 진공증착하여 고분자/저분자 혼합 발광층 구조를 만들었다. MEH-PPV 적색 다공성 고분자 발광층의 혼합 비율을 변화함에 따른 발광층의 미세구조를 원자힘 현미경으로 관찰하였다. 진공증착 후 완성된 고분자/저분자 혼합 발광층을 가진 백색 유기발광 소자의 전류-전압-휘도 측정 결과, MEH-PPV와 PS의 혼합비율이 최적화 되었을 때 안정적인 백색광이 나오는 것을 관측할 수 있었다.

• Solar Energy
• /
• v.14 no.2
• /
• pp.29-37
• /
• 1994

Radiative charaacteristics of glass windows and porous absorbing media which can be used for a solar air heater are determined through the measurements of spectral transmittances. Those in the visible range are measured by the UV-IR spectrometer. Refractive index of glass are obtained by the comparison of the measured transmittances and the correlations derived from the electromagnetic theory and are compared to the theoretical ones calculated from the classical dispersion theory. Absorption and back-scattering coefficients of 15-mesh stainless wire screens are calcuated by the comparison of the measured transmittances and the correlations derived from the two flux model.

• Membrane Journal
• /
• v.29 no.4
• /
• pp.191-201
• /
• 2019

Before the commercialization of polymeric membranes applicable for industrial application, the homework remains for the high-performance polymers to overcome the practical challenge: long-term stability for prolonged service time. Polymers of intrinsic microporosity (PIMs), exhibiting exceptionally high fractional free volume and high permeability, are susceptible to physical aging where the extra volume created by the inefficient ladder-type packing will lead them from the volumetric equilibrium and reduce the free volume/permeability over time. Here, we will re-examine the physical aging of polymers of intrinsic microporosity, and discuss some of the most prominent attempts to mitigate physical aging in PIMs.