• Microbiology and Biotechnology Letters
• /
• v.6 no.2
• /
• pp.65-73
• /
• 1978

Naringinase extracted from the culture media of Aspergillus nidulans was purified, and the activity was proved to be stronger by 781 fold in the part of precipitation with ammonium sulfate, and column chromatography using DEAE-Sephadex A-25 and Sephadex G-100. Two fractions which had the same enzyme activity were isolated by the purification. Both fractions showed the highest enzymes activity under the reaction conditions of pH 5.0 and 40$^{\circ}C$. Molecular weight of fraction I and fraction II were estimated as 78,000 and 26,000 respectively. This indicated that fraction I would be trimer of fraction II. The enzyme was inhibited by glucose and rhammose, and the Km value was calculated to be 2.3${\times}$ 10$\^$-6/ g/ml.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.665-671
• /
• 1996

Changes in the nutritional components of Toha-jeot, salt-fermented Toha shrimp(Caridina denticulata denticulata $D_{E} H_{AAN}$), which was salted with 20%(w/w) sodium chloride and fermented during 60 days at $4\pm1^{\circ}C$ were investigated. The free amino acid contents in Toha-jeot, of which glutamic acid, leucine, Iysine, arginine, glycine and alanine occupy the majority, in order of abundance, increased gradually up to 50 days of fermentation. Most of the nucleotides were decomposed to hypoxanthine; thus ATP and ADP were not detected. Fermentation decreased inosine, IMP and unsaturated fatty acid contents and increased saturated fatty acid contents of Toha-jeot. Palmitic acid was the most abundant fatty acid, followed by palmitoleic acid, linoleic acid, EPA and stearic acid. Among the mineral constituents of Toha-jeot, Na and Ca were dominantly occupying. The Hunter "L" and "b" values of Toha-jeot increased during fermentation while "a" value remained unchanged.

• Resources Recycling
• /
• v.25 no.1
• /
• pp.16-23
• /
• 2016

The separation behaviour of Mo and W from sulfuric acid solution by solvent extraction with Alamine 336 was investigated as a function of solution pH and extractant concentration. Selective extraction of Mo over W by Alamine 336 was obtained in the pH range of 3-5 with low amine concentration. The mixture of Alamine 336 and acidic extractants improved the separation factor between Mo and W and was in the following order: D2EPHA > PC88A > Decanol > Versatic acid. The stripping efficiency of Mo and W from the loaded mixture of Alamine 336 and D2EHPA was very poor, while complete stripping of Mo and W was possible from the mixture of Alamine 336 and Decanol by using a mixture of $NH_4OH$ and $NH_4Cl$.

• Microbiology and Biotechnology Letters
• /
• v.31 no.3
• /
• pp.211-215
• /
• 2003

When Saccharomyces cerevisiae MTY62, a high-RNA content yeast, was cultivated by fed-batch mode feeding molasses and com steep liquor, the cell density less than 45g-DCW/L and the RNA content less than 140mg/g-cell were obtained, indicating that unknown compounds inhibiting the cell growth and RNA accumulation are contained in the molasses. Therefore, in order to obtain higher levels of cell density and RNA content, $Ca^{++}$, $Cu^{++}$and $K^{+}$ ions in molasses were removed by pretreatments of molasses with various agents such as IonClear BigBead, $Na_2$$HPO_4$, $H_2$$SO_4$, citric acid, $K_2$$HPO_4$, and EDT A. Among them, IonClear BigBead, $Na_2$$HPO_4$, and EDTA gave the highest $Ca^{++}$ removal efficiency of about 60-90%. In the batch culture with pretreated molasses, the cell concentration of 18.6g-DCW/I and RNA concentration of 3127 mg/I, maximum specific growth rate of 0.459$h^{-1}$ , and specific consumption rate of reducing sugar of 1.28g-sugar/g-cell-h were obtained, which are about 10%, 17%,47%, and 36% higher levels, respectively, over the batch culture with untreated molasses.

• Journal of the Korean Magnetics Society
• /
• v.11 no.2
• /
• pp.58-62
• /
• 2001

The L $i_{0.5}$F $e_{2.5-x}$A $l_{x}$ $O_4$ systems (x=0, 0.3, 0.6, 0.9, 1.2, 1.5) were investigated by X-ray diffraction and Mossbauer spectroscopy. The structure of all the samples is cubic spinel type and lattice constant decrease with increasing Al content x. The Moissbauer spectra reveal two sextet for 0$\leq$x$\leq$0.6, two sextet and a doublet for 0.9$\leq$x$\leq$1.2, and a doublet for x=1.5. The cation distribution of the samples is (L $i_{1-a}$$^{+}$F $e_{a}$ $^{3+}$)$^{A}$[L $i_{a-0.5}$$^{+}$A $l_{2.5-a-x}$$^{+}$F $e_{2.5-a-x}$$^{3+}$]$^{B}$ $O_4$$^{2-}$ and substituted $Al^{3+}$ ions decrease the covalency of F $e^{3+}$- $O^{2-}$ bond in B-sites and A-B super-exchange interactions.tions.s.tions.ons.s.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.193-193
• /
• 2000

박막 내의 잔류 응력은 막의 기계적 전기적 물성을 변화시키는 등 박막에 많은 영향을 끼치는 것으로 알려져 있다. 이러한 응력은 박막의 증착 공정중 여러 가지 증착 조건에 의해서 변화하게 되는데, 특히 스퍼터링 시스템의 경우에는 증착 압력과 사용하는 가스, 인가되는 전력 등 기본적인 증착조건들에 상당한 영향을 받는다. 이러한 영향은 금속 박막의 경우 상당히 잘 알려져 있다. 또한 반도체 공정에서 금속화 과정중 금속 전극의 단락등을 막기 위해 많은 연구가 진행되어 왔다. 본 논문에서는 고주파 마그네트론 스퍼터링 시스템을 사용하여 산화 아연(ZnO)을 증착하고 여러 공정 변수들에 따른 응력의 변화를 관찰하였다. 실험에서 ZnO 타겟을 사용하였으며, 작동 가스로는 아르곤과 산소를 사용하였다. 증착한 박막들은 모두 압축 응력을 보였으며, 박막의 응력에 가장 큰 영향을 미치는 요소들은 압력, 산소와 아르곤의 비, 기판과 타겟과의 거리 등이었는데, 인가 전력에는 거의 영향을 받지 않았다. 일반적으로 스퍼터링 시스템에서의 압축응력은 atomic peening에 의해서 형성되는데, 박막을 두드리는 높은 에너지의 아르곤이나 산소의 유량과 에너지의 1/2승에 비례하는 것으로 알려져 있다. 그러나 본 시스템에서는 인가 전력을 높여도 응력이 증가하지 않았고, 타겟과의 거리를 줄이면 오히려 응력이 감소함을 보였다. 이는 박막의 응력이 peening 하는 입자의 에너지뿐만이 아니라 증착되는 물질의 증착 속도와도 밀접한 관련이 있음을 보여준다. 즉, 증착속도가 증가하면 peening하는 입자가 끼치는 응력의 효과가 반감되기 때문으로 수식을 통해 증명할 수 있었다.진탄화 처리시간을 변화시켰을 때 화합물층의 생성은 ${\gamma}$'상으로부터 시작되고 $\varepsilon$상은 즉시 ${\gamma}$'상을 소모하면서 생성되어 일정시간이 지난 후 $\varepsilon$상은 안정화되며 질소가스농도가 증가할수록 화합물 층내의 $\varepsilon$상분율은 역시 증가하였다. 한편 CH4 가스농도는 처리되는 강종에 따라 차이를 보이며 적정 CH4 가스농도를 초과시에는 $\varepsilon$상 생성은 억제되고 시멘타이트상이 생성되었다.e에서 발생된 질소 플라즈마를 구성하는 이온들의 종류와 그 구성비율을 연구하였다.여러 가지 응용으로의 가능성을 가지고 있다. 그 예로 plasma processing, plasma wave에 의한 입자 가속, 그리고 가스 레이저 활성 매질 발생 등이 있다. 특히 plasma processing의 경우 helicon plasma는 높은 밀도, 비교적 낮은 자기장, remote operation 등이 가능하다는 점에서 현재 연구가 활발히 진행되고 있다. 상업용으로도 PMT와 Lucas Signatone Corp.에 서 helicon source가 제작되었다. 또한 높은 해리율을 이용하여 저유전 물질인 SiOF의 증착에서 적용되고 있다. 이 외에도 다수의 연구결과들이 발표되었다. 잘 일치하였다.ecursor 분자들이 큰 에너지를 가지고 기판에 유입되어 치밀한 박막이 형성되었기 때문으로 사료된다.을수 있었다.보았다.다.다양한 기능을 가진 신소재 제조에 있다. 또한 경제적인

• Korean Journal of Food Science and Technology
• /
• v.11 no.1
• /
• pp.42-49
• /
• 1979

In order to evaluate the utility of the anthocyanins of Amaranthys tricolor L. as an edible pigment, the present study was undertaken to investigate the effects of pH. temperature, ascorbic acid, sugars and their degradation products, quercetin, thiourea, sodium pyrophosphate and metal ions on the stability of the anthocyanins in the model systems. The results obtained from this study were as follows. 1. The degradation of total anthocyanins was retarded as the pH levels decreased from 8.0 to 1.0. At pH 1.0, however. the initial degradation reaction proceeded faster than at pH 2.0 to 3.0 2. On heating in buffered aqueous solution at $80^{\circ}C$, the total anthocyanin content was higher at pH 2.0 than other pH levels. Increasing the storage temperature accelerated greatly the pigment degradation. In darkness at $40^{\circ}C$, after 10 days, only 19% of the original amount was left, while at $2^{\circ}C$, under the same conditions of storage, approximately 90% of the pigment was retained. The half-life of the pigment, 63.0 days at $2^{\circ}C$, shortened to 1. 7 days at $40^{\circ}C$. 3. An increase in ascorbic arid concentration from 0. 15 to 0.50 mg/ml lowered the anthocyanin retention. 4. There was no significant difference between glucose and fructose in anthocyanin degradation effect. Furfural was more effective than other sugar degradation products, formic acid or levulinic acid in accelerating anthocyanin breakdown. 5. Neither quercetin nor sodium pyrophosphate had a protective effect on the anthocyanins in the presence of ascorbic acid, while, in the systems 0.5 or 1 mg/ml of thiourea with $150{\;}{\mu}g/ml$ of ascorbic acid, the loss of anthocyanins was significantly reduced. 6. Both mercuric and cupric ions in 30 ppm greatly accelerated anthocyanin degradation.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.2
• /
• pp.167-173
• /
• 2005

Background : Airborne particles during Yellow Sand phenomena are known to be associated with the respiratory disease. The purpose of this study was to evaluate the concentration and metal component properties of Yellow Sand particles and compare with airborne microbial concentration and species in non Yellow Sand and Yellow Sand phenomena. Methods : Samplings were carried out in 2002 in Seosan, during non Yellow Sand and Yellow Sand phenomena. Samples were taken using the 8-stage Cascade impactor and metallic elements were analyzed by XRF. Those were culture on the media for bacterial and fungal culture and celline for virus. Results : The concentration of total suspended particulate matter were respectively $80.2{\mu}g/m^3$, $40.3{\mu}g/m^3$ in non Yellow Sand and Yellow Sand phenomena. The concentration of metallic elements such as Ca, Fe, Cu and Zn in Yellow Sand phenomena were higher than its in non Yellow Sand. Two bacteria, Bacillus species and Staphylococcus were grown in two periods. In both periods, several fungal spores(Mucor species, Cladosporum, Alternaria, Aspergillus, Penicillium, and Alternaria species) were identified. The differences of bacteria and fungus species not observed in Yellow Sand and non Yellow Sand. Any viruses were not isolated in between both periods. Conclusions : The concentration of total suspended particulate matter and some metallic elements in Yellow Sand phenomena were higher than its in non Yellow Sand. The difference of bacteria and fungus species was not observed in non Yellow Sand and Yellow Sand phenomena.

• Membrane Journal
• /
• v.28 no.4
• /
• pp.286-295
• /
• 2018

A novel multi-valent salt based on polyethyleneimine having molecular weight of 800 (PEI 800) has been synthesized and characterized as forward osmosis draws solute. A reaction intermediate was synthesized by the neutralization reaction of polyethyleneimine and methyl acrylate, and was hydrolyzed with potassium hydroxide to synthesize a water soluble carboxylic acid (potassium salt) polyethyleneimine. NMR spectrometry, viscometry measurements and osmometry measurements was performed to characterize the draw solute. Forward osmosis experiments were done to know whether the solute could be used as a draw solute or not. The result shows comparable water flux and lower reverse salt flux compared with NaCl as a draw solute. We have also demonstrated recycling of the draw solute in the FO-NF integrated process.

• Journal of the Korean Chemical Society
• /
• v.42 no.4
• /
• pp.369-377
• /
• 1998

The palladium(II) and platinum(II) complexes(where, $([M(L)_2X_2]$, M=Pd(II), Pt(II); L=isoxazole(isox), 3,5-dimethylisoxazole(3,5-diMeisox), 3-methyl, 5-phenylisoxazole(3-Me, 5-Ph-isox), and 4-amino-3,5-dimethylisoxazole (4-ADI); X=Cl, Br) with isoxazole and its derivatives were investigated on antitumor activity by MM2 and EHMO calculation. Because for all the complexes the ${\sigma}MO$ energy level $(E_{{\sigma}(M-X)})$ between $d_x^{2-}_y^2$ orbital of central metal and px orbital of halogen atom is less than ${\sigma}MO$ energy level $(E_{{\sigma}(M-N)})$ between $d_x^{2-}_y^2$ orbital of central metal and px orbital of N atom, without exception. And judging, from the lower $(E_{\'{o}(m-x)})$ value in trans, the bonding strength was found to be weaker in trans isomer than in cis. For the Pd(II) and Pt(II) complexes which have planar ligands, it was shown that for all the complexes dissociation of X-atom in the Pd(II) complexes is easier than that of X-atom in the Pt(II) complexes in both cis- and trans-complexes. Therefore it suggests that the easier dissociation of $X^-$ ion has some relations with antitumor activity, and a linear equation with correlation coefficient of 0.96 was found between ${\Delta}E_{{\sigma}(N-X)}(E_{{\sigma}(M-N)}-E_{{\sigma}(M-X)})$ and inhibitory activity coefficient, logIA.