• Journal of the Korean Magnetics Society
• /
• v.22 no.2
• /
• pp.42-44
• /
• 2012

We have studied a means to control the composition of nickel-iron thin films. By changing current and voltage applied to a electroplating electrolyte we could manipulate the relative concentration of nickel and iron in the thin films, which caused variations of coercivity, squareness, and saturation magnetic field. As we increase the content of iron in the thin films by using potentiostatic and galvanostatic plating, the grain size was increased and the coercivity was reduced.

• Journal of the KSME
• /
• v.31 no.9
• /
• pp.780-788
• /
• 1991

수소를 에너지매체로 하여 체계적으로 이용하기 위하여 다음과 같은 사항이 예상된다. 첫째, 물에서 수소를 만들이 위하여 어떠한 에너지원을 사용해야 하는 문제이다. 화석연료나 원 자력으로는 깨끗한 에너지시스템이라는 본래의 목적에 어긋난다. 그래서 태양에너지를 이용하는 것이 원칙이라고 생각한다. 둘째, 수소의 수송과 저축의 방법인데, 파이프라인이나 고압봄베와 같은 종래의 방법을 극복하는 혁신적인 금속수소화물법이 중요하다고 생각된다. 철 . 티탄합금, 란탄 . 니켈합금, 마그네슘 . 니켈합금 등은 합금 체적의 100배에 가까운 수소를 흡장할 수 있는 특성을 가지고 있다. 셋째, 수소에너지가 석유에 대체되기 위해서는 에너지를 수소로 변경함으로써 석유로는 불가능 했던 것이 가능해질 수 있는 이용법을 개발하는 일이다. 넷째, 수소를 2차 에너지로 사용함으로써 전력계층과의 협조체제가 확립되어 에너지원, 에너지 매체, 에너지이용의 협조적이며 유기적인 시스템이 가능해질 것으로 생각된다. 전력이 남아돌 때는 물분해로 수소를 만들어 저축하고 전력이 부족할 때는 연료전지를 사용하여 전력으로 바 꾼다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.204-204
• /
• 2011

최근 자동차수명의 연장, 고품질, 내식내마모성 향상의 요구에 따라 아연도금 및 합금도금의 친환경화, 아연합금도금특성 향상, 흑색화 실현, 아연-철, 아연-니켈 벤딩성 향상, 주석-아연 합금도금과 무전해 Ni-W-P, Ni-B-W, 전해 NiSiC-PTFE, Ni-Diamond복합도금 등의 도금현장 적용과 도금 후 3가 크로메이트 도장 밀착성에 대한 품질기술지원이 요구되고 있다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.05a
• /
• pp.42-42
• /
• 2001

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.287-287
• /
• 2012

주석합금도금 피막은 약한 전류가 흐르는 전자제품, 휴대전화, 자동차 공업용, 장식용으로 사용되고 있다. 현재까지 공업적으로 사용되고 있는 주석합금도금의 합금원소로서 은, 코발트, 니켈 등의 높은 가격의 금속과 납과 같이 ELV 및 RoHS 유해환경물질규제지침에 따라 수출제한을 받는 6가 크롬, 카드뮴 등이 알려져 있다.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.4
• /
• pp.71-75
• /
• 2022

In this research, Fe-Ni alloy films were electrodeposited on stainless steel (SS304 and SS430) and Ti plates to investigate the effects of surface conditions of cathode on deposits. The Ti plates were electropolished in 3 M H₂SO₄-methanol electrolytes at various conditions before electrodeposition, and unpolished Ti and the optimized specimen, polished at 10 V for 8 min, were used as cathode. The anomalous codeposition, the phenomenon which more active Fe is reduced preferentially, occurred on all substrate, however, there were differences in composition of all deposits. As the results of potential monitoring during electrodeposition, it was confirmed that the larger overpotential was applied to the deposition cell when using Ti cathode, leading to high Fe content of deposits from unpolished Ti due to increase in nucleation of Fe. Also, it was founded that the polished Ti can reduced deposition overpotential.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.6
• /
• pp.303-308
• /
• 2017

The $FeCl_3$ waste solution used to etch various metals contains valuable metal such as nickel. In this study, we recovered as high purity nickel carbonate crystalline powders from nickel-containing etching waste solution after regeneration of iron chloride. Firstly we eliminated about of the iron impurities under the condition of pH 4 using 5 % NaOH aqueous solution and then removed the remaining impurities such as Ca, Mn and Zn etc. by using solvent extractant D2EHPA (Di-(2-ethylhexyl) phosphoric acid). Thereafter, nickel carbonate powder having a purity of 99.9 % or more was obtained through reaction with sodium carbonate in a nickel chloride solution.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.205-210
• /
• 2008

Magnetic hysteresis loops of a nickel strip and a Fe-Co alloy strip, which have been used in magnetostrictive strip type guided wave transducers for long range ultrasonic testing of pipelines, were measured and then magnetic property effects of a strip on transducer sensitivity were analyzed. The sensitivity of an optimized Fe-Co strip transducer was superior to that of the nickel strip transducer by a factor of about 30. It was shown that this was mainly attributed to the differences in remanence magnetization and coercivity of the two magnetostrictive materials.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.4
• /
• pp.71-76
• /
• 2008

The mechanical properties of Ni-Fe alloy were varied with the current type, current density and bath conditions such as concentrations and temperature. The effect of electroplating parameters on the surface hardness, mechanical strength, residual stress and wear properties were investigated. The mechanical properties of electrodeposits with PC plating is superior to those with DC plating. Ni-Fe electrodeposits with PC has approximately 50% lower residual stress than that of DC plating. The tensile strength of PC electroplated specimen was 15% higher than that of DC electroplated specimen. The wear resistance of PC specimen was 30% improved relative to that of DC specimen.

• Resources Recycling
• /
• v.4 no.1
• /
• pp.46-51
• /
• 1995

After removal of mercury in the silver oxide batteries with the distillation process, the leaching of valuable metals from the residue was studied. The distilled residue was reacted with the various HNO, concentration, reactlon temperature, readion time and pulp density. It was found that the optimum condition for leachmg was 2N HNO,, 40-60% reaction temperature, 6 hours reaction tlme and 10g/200ml pulp density. More than 99% of silver and zinc were dissolved in this process while less than 50% of iron and nickel were leached