• Applied Chemistry for Engineering
• /
• v.21 no.1
• /
• pp.52-57
• /
• 2010

Although chemical sedimentation and ion exchange are usually applied to the treatment of heavy metal ions and radioactive cations, they have some serious disadvantages like a great consumption of chemicals, the disposal of valuable metals, and the secondary pollution of soil by the solid-waste. The advanced countries recently have studied the electrochemical ion exchange, combined electrochemical reduction and ion exchange, for the development of the alternative technique. This study has been performed to investigate the optimum condition for the preparation of the nickel hexacyanoferrate (NiHCNFe) which is an electrochemical ion exchanger. NiHCNFe film was deposited on the surface of nickel plate by chemical method or electrochemical method. The morphology and composition of NiHCNFe were observed by SEM and EDS, respectively. The peak current density of NiHCNFe was measured from the cyclic voltammograms of the continuous oxidation-reduction reaction in a parallel plane ion exchange electrode reactor. It was found that the chemical preparation method was better than the electrochemical method. The concentrated NiHCNFe was apparently deposited on nickel plate when dipping in the preparing solution for 118 h, especially. It also had a best durable performance as an ion exchange electrode.

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.546-551
• /
• 1992

Reaction mechanism on the solvent extraction of nickel(Ⅱ) with N-benzylisonitrosoacetylacetone imine(HIAANB) was studied spectrophotometrically. Absorbance was measured by changing the ligand HIAANB concentration in the chloroform organic phase and the pH values in the agueous solution phase. From the absorbance data, the reaction rate was found to be the first order for HIAANB concentration and the inverse first one for [$H^+$]. The rate determining step of the extraction reaction and the rate equation are as follows; $Ni^{2+}$＋HIAANB ${\to}$ Ni-IAANB$^+$＋$H^+$ -d[Ni$^{2+}$] / dt = K'[Ni$^{2+}$][HIAANB]$_0$ / [H$^+$] Calibration curve for the spectrophotometric determination of nickel(Ⅱ) ion in the aqueous solution was linear below the concentration of 1.17 ppm at the optimum experimental condition. And the ligand-to-metal ratio, the relationship between extractability and pH of the aqueous phase, and the effect of diverse ion on the determination of nickel(Ⅱ) ion were examined.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.1
• /
• pp.73-81
• /
• 2020

Strontium (⁹⁰Sr) and nickel (⁵⁹Ni) have been considered as key radionuclides in the safety assessment of radioactive waste disposal. Through various efforts to impede the migration of radioactive nuclides underground, it has been established that some minerals generated from the corrosion of the waste containers have a positive chemical interaction with these radionuclides. Among these minerals we selected mackinawite (FeS), an iron and sulfur compound, and performed a sorption experiment for the Sr and Ni in FeS under anoxic and alkaline conditions by reflecting deep underground environments. The effects of pH on sorption were likewise investigated in the pH range of 8 ~ 12. As a result, it was found that strontium failed to exhibit a good sorption capacity in a weak alkaline range, while nickel showed a noticeably higher sorption affinity over the entire experimental pH range. Moreover, we determined that as the pH increased in the solution, the distribution coefficients (K_d) were increased for both nuclides, which reflects when an alkalinity increses, the surface of the mineral charges much negatively by detaching the hydrogen or cations on the mineral surface. Thus, it can be concluded that the cationic nuclides of Sr and Ni can attach easily to the mineral under strong alkalinity.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.11a
• /
• pp.249-252
• /
• 2004

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.118-122
• /
• 1997

차세대 원자력발전소 증기발생기 전열관 재료로 채택된 니켈기저합금으로 기존 전열관 재료인 인코넬600에 비해 고온 고압 조건에서 응력부식균열에 강한 장점을 가진 합금인 인코넬690 시료에 최대 에너지 120 keV의 질소 이온빔을 조사하여 이 재료의 기계적 특성 변화를 관측하였다. 특성 시험으로는 표면 경화를 관찰하기 위한 미세 경도 시험을 수행하여 미세 경도 증가를 확인하였다 아울러 표면 경화가 피로 특성에 미치는 영향을 관찰하기 위해 피로 균열 전파 시험을 수행하여 이온 주입으로 인한 표면 경화가 피로 균열 전파를 촉진시킴을 관찰하였다.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 1998.07a
• /
• pp.48-49
• /
• 1998

생쥐 수정난 및 초기 2세포배를 체외배양시 0.428mM 이상의 칼슘 농도를 필요로 하는 것을 알았다. 칼슘 chelator인 EDTA를 저농도로 배양액에 처리 할 경우 2-cell block이 유의하게 극복되었으며, 저농도의 칼슘이 존재하는 배양액에서 보인 2-cell block은 니켈 50 $\mu$ M을 처리함으로서 극복 효과를 보였다. EDTA와 니켈에 의한 2-cell block 극복 현상이 어떠한 기작에 의해 이루어지는가에 대한 자세한 연구가 필요하다고 생각된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.1 s.256
• /
• pp.50-54
• /
• 2007

Nickel nano and microstructures are fabricated with simple process. The fabrication process consists of nickel deposition, lithography, nickel ion etching and plasma ashing. Well-aligned nickel nanowalls and nickel self-encapsulated microchannels were fabricated. We found that the ion etching condition as a key fabrication process of nickel nanowalls and self-encapsulated microchannels, i.e., 40 sccm Ar flow, 550 W RF power, 15 mTorr working pressure, and $20^{\circ}C$ water cooled platen without using He backside cooling unit and with using it, respectively. We present the experimental results and discuss the formational conditions and the effect of nickel redeposition on the fabrication of nickel nano and microstructures.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.157-158
• /
• 2015

$Ni-TiO_2$ 복합체를 전기도금법으로 제조할 때, pH, 전류밀도 변화에 따른 $TiO_2$ 부피분율을 측정하였다. 산화물의 부피분율은 pH가 높아질수록 낮아지고, 전류밀도가 증가하면, $100mA/cm^2$에서 최댓값을 가진 뒤에 감소하였다. 기존의 산화물 공석량 예측식 모델에 수소발생반응을 고려하여 적용한 결과, 기존 모델보다 실험값과 예측값의 정확도가 더 높았다. 따라서, 산화물이 전기도금층에 공석될 때에는 수소이온의 환원반응과 니켈이온의 환원반응을 종합적으로 고려하여야 한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1998.05a
• /
• pp.86-86
• /
• 1998

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.10a
• /
• pp.279.1-279
• /
• 1999