• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.41-42
• /
• 2008

무선방식으로 원격에서의 인식으로 정보교환을 가능하게 하는 RFID(Radio Frequency IDentification) 시스템은 태그 내의 배터리 유무에 따라 수동형과 능동형으로 구분된다. 수동형 태그는 판독기로부터 받은 RF 신호를 에너지로 이용하기 때문에 인식거리가 짧으며, 가격이 싸고 반영구적으로 사용할 수 있는 장점이 있다. 반면에, 능동형 태그는 금속재질에 취약한 수동형의 단점을 극복하는 동시에 인식거리가 길고, 인식률이 좋은 장점이 있다. 따라서 항만물류나 국방 분야에서 능동형 RFID 시스템에 대한 개발이 점차 확대되고 있다. 하지만 동일한 표준으로 개발된 제품의 서로 간에 인식이 불가능한 사례가 보고되고 있으며, 국제적으로 정확한 평가방법 및 장치가 정립되지 않아 개발된 제품들 간의 상호 운용성 및 표준 적합성 평가에 대한 어려움이 존재한다. 본 논문에서는 능동형 RFID 시스템의 적합성 평가를 위한 에뮬레이터의 하드웨어 및 소프트웨어를 설계하고 제작하였다. 설계된 장치는 Matlab의 Simulink를 통한 시뮬레이션으로 성능을 분석하였고, 실제 능동형 RFID 태그의 표준적합성 평가를 통해 에뮬레이터의 적용 가능성을 검증하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.372-380
• /
• 2009

In this paper, we analyze the active RFID systems ISO/IEC 18000-7 and ISO/IEC 18000-4. In order to improve the coverage in sensor networks, which consist active RFID tag, we propose RFID multi-hop relay system using active RFID relay tag. To compare the performance between the existing ISO/IEC 18000-7 system and the proposed RFID multi-hop relay system, we introduce new system efficiency measure and sensitivity-based measure of achieved coverage. Also, we analyze the performance of the proposed system and compare it with that of the existing system through MCL (Minimum Coupling Loss) analysis and SLS (System Level Simulation) analysis.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.10a
• /
• pp.365-368
• /
• 2004

유비쿼터스에 대한 인프라의 증가로 수많은 터미널들이 연동되어 우리 생활 주변에 자리 잡아 가고 있으며 정부와 개인, 사업장, 일상생활에 많은 영향을 미치는 차세대의 컴퓨팅 패러다임으로 다가오고 있다. 다양한 센서 기술들 중에 능동형 RFID를 사용하면 실세계에서 사용자들의 위치정보를 신속하고, 정확하게 파악하여 사용자의 위치에 따른 정보 제공을 지능적이고 효율적으로 할 수 있다. 본 논문에서는 병원에서 능동형 RFIB 시스템을 이용한 정보의 획득과 활용에 관한 API의 설계와 구현을 위한 기본적인 방법을 제안한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1419-1435
• /
• 2015

In this study an active RFID system of low power consumption is proposed, for which we improved the tag collection algorithm of ISO/IEC 18000-7 standard and significantly reduced the tag collection time. We classified the type of power consumption according to the operating mode of active RFID and proposed the method which can accurately estimate battery life time. By calculating the power consumptions of proposed and current methods, we can compare the battery life times of both methods. Through this analysis we can demonstrate the superiority of the proposed method in battery life time.

• Journal of KIISE:Information Networking
• /
• v.36 no.2
• /
• pp.118-129
• /
• 2009

The ISO 18000-7 Active RFID standard, a single channel system operating in the 433Mhz, faces technical difficulties in supporting some recently introduced application demands because of its low transmission rates and radio interference between readers. We propose a new multi-channel active RFID system operating in the 2.4Ghz. The special feature of the proposed system is that a reader makes use of multiple interfaces to improve its performance like a multi-core processor. However if only a small part of interfaces are actually used, the performance improvement would not meet the expectation. To overcome this problem, a new multi-channel multi-interface active RFID protocol, which balances communication loads among all available interfaces, is necessary. 3 protocols, named as "Aggregated", "LP-Combined", "AP-Balanced", are proposed. Through simulation, we compare them for various conditions by changing number of tags, number of interfaces, tag data size. AP-Balanced shows the best performance and its performance increases almost linearly as the number of interface increases, which meets our expectation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8B
• /
• pp.822-829
• /
• 2009

A reader protocol is an interface between a host and RFID readers. There are several standards for reader protocol such as EPCglobal Low Level Reader Protocol (LLRP) 1.0.1, EPCglobal Reader Protocol (RP) 1.1, and ISO/IEC 15961/15962. Unfortunately, these standards focus on the passive RFID system, and so they are not appropriate for the active RFID system. In this paper, we implemented an efficient reader protocol for the active RFID system, which is based on EPCglobal LLRP 1.0.1, but smoothing/filtering functions of EPCglobal RP 1.1 are added. This protocol is designed to configure air interface parameters for active RFID readers and tags. It can reduce the amount of data transfer between the reader and host by filtering function, and can improve the performance of tag collection by smoothing function. In addition, it can remove inefficiency caused by tag memory data change according to the standards of ISO/IEC 15961/15962. In the real-world environment, we evaluated the performance of our implemented reader protocol using one RFID reader and 45 tags.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7A
• /
• pp.669-681
• /
• 2010

In this paper, we analyze the active RFID system ISO/IEC 18000-7. In order to apply to USN, which consists active RFID tags and sensor nodes, we propose UWB-based Class 4 active RFID protocol using active RFID relay tag as relay AP. To compare the performance between the existing ISO/IEC 18000-7 system and the proposed system, we introduce sensitivity-based measurement of achieved coverage and system efficiency. Also, we analyze the performance of the proposed system and compare it with that of the existing system through MCL analysis and SLS analysis.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.113-120
• /
• 2009

Through the automatic sensing of the environment, USN technology can give the best services. In this work, we have developed an active RFID system and examined its performance. By implementing it into water quality sensors, we constructed a system that can detect diverse indoor/outdoor environment and provide information about the pollution level obtained from the temperature and PH sensors. Our RF system had an internal Print-on-PCB antenna for the miniaturization of the tag. We used a RF transceiver CC2510 chipset of TI company to realize the active RFID function. By using RSSI constants obtained, we performed the evaluation of real time location accuracy with a software written in Labview. Among 10 arbitrary locations, we obtained average measurement errors of 1.69 m in x axis and 1.66 m in y axis. This technology can be applied to logistics, environmental monitoring, prevention of missing children and various applications.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.204-212
• /
• 2008

Active RFID tags are currently used in harbor transportation; they are attached to cargo containers for sea transportation. They are designed to be able to be identified by RFID readers installed at ports in many countries. The international standard ISO/IEC 18047-7 regarding RFID conformance test methods suggests the use of air interface evaluation between an RFID reader and a tag. However, the test method suggested by the international standard is intended to detect a radio signal over only a very short period. Outcomes were uncertain, making it difficult to evaluate the system accurately. This paper proposes a new evaluation method by incorporating a 'self-running test mode' environment into the RFID tags in order to reduce the test time and increase testing accuracy. We found that the application of the suggested method to actual tags improves measurement time and uncertainty over that obtained using existing methods.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.5
• /
• pp.201-208
• /
• 2008

An active RFID system has the advantages of a long identification distance and a good identification rate as well as overcoming the passive RFID's drawback such as the lowering of identification rate on metal materials. So, the development of an active RFID system has been gradually increasing in harbor logistics and the national defense area. On the other hand, some identification failures between products developed under the same standards have been reported, and there are difficulties in evaluating the interoperability between developed Products and standard conformance test because an accurate evaluation method and equipment has not been established at the international level. Motivated by these, this study presents a realization of the hardware and software of emulator to evaluate the standard conformance of an active RFID system, Performance of the designed system are then analyzed by means of simulations of Matlab/Simulink, and the applicability of the emulator is verified by evaluating the standard conformance of a real active RFID tag.