• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.792-800
• /
• 2021

This paper presents a new structure for a linear active magnetic bearing using a Halbach magnet array. The proposed magnetic bearing consisted of a Halbach magnet array, center magnet, and single coil. The proposed linear active magnetic bearing has a high dynamic force compared to the previous study. The high dynamic force could be obtained by varying the thickness of a horizontally magnetized magnet. The new structure of Halbach linear active magnetic bearing has a high dynamic force. Therefore, the proposed linear active magnetic bearing increased the bandwidth of the system. Magnetic modeling and optimal design of the new structure of the Halbach linear active magnetic bearing were performed. The optimal design was executed on the geometric parameters of the proposed linear active magnetic bearing using Sequential Quadratic Programming. The proposed linear active magnetic bearing had a static force of 45.06 N and a Lorentz force constant of 19.54 N/A, which is higher than previous research.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.83-89
• /
• 1991

본 연구에서는 5축 능동형 자기베어링 시스템에 대한 설계 및 제작 방법을 소개하고 모우드 변수 및 임계속도, 과도 및 정상상태에서의 응답 특성 등 관련 동특성을 실험으로 규명하였다. 자기베어링 제어방식은 PID 제어를 이 용하였고, air jet를 이용하여 회전체를 구동할 수 있도록 실험장치를 구성하 였다. 실험을 통하여 안정한 부상특성을 실현하였고, 1,2차의 임계속도를 통 과하여 10,000rpm이상이 회전속도에서도 안정하게 운전할 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.4
• /
• pp.511-519
• /
• 2013

Switching controllers for active magnetic bearings are claimed to minimize the copper losses because they do not use bias currents. In this study, we compare the performances of the switching controller with those of the widely used proportional-derivative (PD) controller. The PD controller is combined with a synchronous notch filter to reduce the effect of the unbalance disturbance. For a fair and objective comparison, the PD controller is designed systematically. The switching controller is designed so that the dynamics of the two controllers are almost identical. A system model is developed. This model includes the flexible modes of the rotor and the dynamics of the sensors and amplifiers. The simulation results show that the switching controller indeed reduces the copper loss at lower speeds. However, it fails to operate around the speed close to the bending mode of the rotor.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1112-1113
• /
• 2007

능동형 자기베어링과 보(Beam)와 피봇으로 구성되는 시소 (SISO)는 제어적 관점에서 보면 많은 유사성이 있다. 본 논문에서는 Carl R. Knospe 등이 제안한 보와 피봇을 이용한 1자유도 자기베어링 시뮬레이터를 실제 제작하여, 비레 미분 적분 제어 알고리즘을 적용한 디지털 제어기와, 큰 힘을 발생시키기 위해서는 필연적인 전자석 코일의 큰 인덕턴스에 의해 제한되는 Bandwidth(BW)를 보상하기 위해 앞섬 보상기를 가지는 전류제어기를 구현하였다. 복잡한 자기베어링 시스템을 기구적으로 간단한 보와 피봇 시스템으로 상사시킴으로써, 자기베어링 제어 알고리즘 개발 및 파라미터 튜닝의 목적을 달성할 수 있었다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.267-272
• /
• 2012

This paper propose the implementation of robust fuzzy controller for controlling an active magnetic bearing (AMB) system with 6 degree of freedom (DOF). A basic model with 6 DOF rotor dynamics and electromagnetic force equations for conical magnetic bearings is proposed. The developed model has severe nonlinearity and uncertainty so that it is not easy to obtain the control objective. For solving this problem, we use the Takagi-Sugeno (T-S) fuzzy model which is suitable for designing fuzzy controller. The control object in the AMB system enables the rotor to rotate without any phsical contact by using magnetic force. In this paper, we analyze the nonlinearity of the active magnetic bearing system by using fuzzy control algorithm and desing the robust control algorithm for solving the parameter variation. Simulation results for AMB are demonstrated to visualize the feasibility of the proposed method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.417-418
• /
• 2011

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.548-553
• /
• 2000

A new design of cylindrical capacitive sensor(CCS) for the displacement measurement of precision active magnetic bearing(AMB) spindle is presented in this paper. This research is motivated by the problem that existing 4-segment CCS is still sensitive to the $3^{rd}$ harmonic component of the geometric errors of a rotor. The procedure of designing new CCS starts from the modeling and error analysis of CCS. The angular size of CCS is set up as a design parameter, and new 8-segment CCS is introduced to possess an arbitrary angular size. The optimum geometry of CCS to minimize the effect of geometric errors is determined through minimum norm approach. Experimental results with test rotors have confirmed the improvement in geometric error suppression.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.963-967
• /
• 2007

Flywheel energy storage systems (FESS) have advantages over other types of energy storage methods due to their infinite charge/discharge cycles and environmental friendliness. The system has two radial bearings and one hybrid-thrust bearing. Thrust hybrid-type bearing use permanent magnet to relieve gravity load. The radial bearings were designed to provide sufficient force slew rate considering the unbalance disturbance at the operating speeds. In this paper, we will derive dynamic model of hybrid-type bearing using permanent magnet for thrust bearing and present simulation and stability of the model.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.771-772
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1025-1026
• /
• 2010