• The Journal of the Acoustical Society of Korea
• /
• v.11 no.2
• /
• pp.59-67
• /
• 1992

Recently, the problem which actively control the unwanted noise propagated from the technical structure by the generated secondary sound has become considerable topic from the environmental preservation point of view. In most of these studies, active noise control deals with a plane wave propagation at low frequency using adaptive filtering techniques. On the other hand, in real acoustic systems are mostly short due to the limitation of geometric configuration. In this case, the acoustic properties such as reflections and resonances inside the acoustic system should be considered. In this paper, the acoustic modeling method for short length duct was introduced using the transfer matrix method, and the active noise control problem was investigated with \implementation of FIR filter for the transfer function of control system derived from this modeling method. The identification methods for the acoustic model of actual control system was proposed by numerical computation technique based on the estimation of optimal FIR filter coefficients. The acceptable attenuation on the real acoustic system and stability of the controller are predicted in this computational simulation.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.57-63
• /
• 2017

This paper presents an active acoustic-reflection control algorithm based on a single sensor. The proposed algorithm operates in a system comprising a single sensor located nearby the reflective surface and a control transducer mounted on the reflective surface. First, the incident and reflected acoustic signals are separated from the sensor signal, and a control signal is generated using the separated signals. For the signal separation, the proposed algorithm requires the response of the reflection path which is estimated from the acoustic response between an external sound source and the sensor. Finally, the control filter is adjusted using the FxLMS (Filtered-x Least Mean Square) algorithm. To verify the effectiveness of the proposed algorithm, it was implemented in real time using a DSP (Digital Signal Processing) board, and the experimental results obtained in one-dimensional air-acoustic environment show that the reflections of the 1 kHz burst can be reduced by 11.6 dB.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.331-337
• /
• 2018

In this paper, we apply the NR (Noise Rating) to the evaluation of the residual noise of the window type ANC (Active Noise Control) and study the active noise controller for minimizing the NR value in rooms. We proposed a shape of a noise shaping filter of the Filtered-E LMS (Least Mean Square) algorithm that reduces the NR value within the effective operating frequency band of the ANC. The usefulness of the proposed scheme is verified by simulation and showed that the NR value of the residual noise is lower than the filters used in the conventional psychoacoustic ANC.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.809-823
• /
• 1991

본 연구에서는 Wiener 필터링 이론에 의하여 소음원의 입력신호에 대한 최적 한 예측을 할 수 있는 최적예측기(optimal predictor)로써 부가적인 음을 발생시키고 입력신호 및 출력신호 간의 차인 오차를 최소화시키도록 하는 적응신호처리방법에 대 해 설명하고 이러한 적응 신호처리 방법을 이용한 능동 소음 제어 방법을 제시하였다. 이와 아울러 제어계의 환경 변화에 따른 파라메타의 변화에 적응적으로 응답이 가능해 야 하는 적응 소음 제어계에서, 음향궤환과 함께 필히 고려해야하는 부가적인 전달함 수-모델과 스피커를 포함하는 보조경로 및 오차미이크로폰을 포함하는 오차경로의 전 달함수의 영향을 고려한 능동소음제어에 대해 연구하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.3
• /
• pp.76-82
• /
• 1993

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.171-177
• /
• 1995

환경 보호와 연비 향상을 목표로 한 고출력 엔진과 초경량 차체의 차량을 설계하려는 최근의 차량 개발 추세는 진동과 소음의 문제를 더욱 악화시키느 요인이 되었다. 이에 반해 차량을 구입하는 고객은 보다 정숙한 주행 성능을 요구하고 있다. 이런 상황에서 커다란 설계의 변경이나 차체의 중량 증가없이도 ㅈ거용가능한 능동 제어 기술(Active Control Technique)은 차량의 진동, 소음문제에서 훌륭한 해결책의 하나로 등장하였다. 최근까지 능동 소음제어와 관련한 연구는 여러 분야에서 수행되었으며, 실제로 시작차량뿐만 아니라 양산차에 적용된 사례가 있다. P.A.Nelson등은 음향 공동내의 음향 에너지를 최소화시키는 소음 제어에 관한 이론, 컴퓨터 시뮬레이션 및 실험에 대하여 발표하였다. 또한 최근의 디지탈 신호 처리기(DSP, Digital Signal Processor)의 개발에 힘입어 해석의 검즈외에도 실제 차량에 적용한 사례도 있다. 로터스(LOTUS,영)는 다양한 시작차를 제작하여 그 효과를 검증하였으며, 닛산(Nissan, 일)은 양산차에 적용하여 판매하고 있는 실정이다. 본 논문에서는 능동 소음 제어 장치를 개발하여 승용차에 적용한 결과를 보이도록 한다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06a
• /
• pp.59-63
• /
• 1998

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.1
• /
• pp.102-110
• /
• 1999

The attenuation property of active noise control system is much dependent on the locations of transducers. It is very difficult to retermine the orfunal locations of transducers analytically, because the acoustic behaviors in active noise control systems are very complex and the acoustic parameters, fluid density, corqJlex propagation, coefficients, etc., are usually unknown. In this paper, effects of positions of transducers and of distances between transducers on attenuation properties of active noise control systems is investigated via computer simulations. Tbe transfer functions between the transducers are derived using the superposition principle for computer simulations. Computer simulations show that the acoustic monopole and dipole systems for duct noise attenuation are sensitive to variations of the transducer location.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.6
• /
• pp.375-382
• /
• 2014

In many practical active noise control applications, the primary noise contains multiple closely-spaced harmonics. A narrowband ANC system consists of adaptive filters excited by a composite reference signal, which is the set or sum of sinusoids. This paper analyzes and shows that the convergence speeds of the direct form, parallel form, and simplified parallel form narrowband ANC systems are affected by the fundamental frequency and frequency separation between two adjacent sinusoids in the reference signal. This paper also proposes the new simplified parallel form narrowband ANC system whose convergence speed is independent on the frequency of the reference signal. Computer simulations are conducted to verify the analysis presented in the paper and to compare the proposed narrowband ANC system with the conventional narrowband ANC system.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.6
• /
• pp.70-75
• /
• 1992