• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.4
• /
• pp.511-519
• /
• 1996

The purposes of this study are 1) to develop optimum FRW technique of SNCM220, SCM435, SACM645 and SCM415 bar-to-bar similar friction welding, 2) to develop in-process real-time weld quality nondestructive evaluation technique by acoustic emission method, and 3) to certify of weld quality by inspection of tensile fracture surface on friction welded joints.

• Journal of Welding and Joining
• /
• v.13 no.4
• /
• pp.103-112
• /
• 1995

This study was performed to optimize friction welding conditions of Cr-Mo steel bars used for hydraulic of pneumatic valve spools and to realize the real-time evaluation of weld quality by acoustic emission method. SNCM220, SCM435, SCAM645, and SCM415 steel bars were tested to find optimum conditions of friction welding. Auantitative equations which exhibit the relations of tensile strength, elongation, reduction of area and energy absorption with friction heating time were obtained by the experiment. Acoustic emission was also performed in the friction weldig process, and the real-time evaluation was enabled to find the optimum range of weld strength. Finally, the strength and toughness of welded joints were interpreted by the sem analysis of tensile fracture surfaces.

• Journal of Power System Engineering
• /
• v.6 no.1
• /
• pp.55-60
• /
• 2002

There has been no report on the life prediction for gas turbine materials at high temperatures based on the creep properties and their relationship with the AE(acoustic emission) properties as a means of real-time non-destructive testing. One of the important issues is thus to develop a reliable method of evaluating creep properties by the AE technique. In this paper, the real-time evaluation of high temperature creep time and AE cumulative counts for nickel-based superalloy Udimet 720 was performed on round-bar type specimens under pure load at the temperatures of 811, 922 and 977K. The total AE cumulative counts until the starting point of secondary creep($N_1$) and that of tertiary creep($N_2$) have quantitative relationship with the tertiary creep time and the rupture time. It is thus possible to construct the life prediction system based on creep and the prevention system of tertiary creep by using AE technique.

• Journal of Power System Engineering
• /
• v.6 no.1
• /
• pp.68-73
• /
• 2002

An opportunity to use the elevated temperature has been recently increasing in various elements of heat facilities or machines such as heat exchanger tubes, pressure vessels, engines of aircraft, boilers and turbines in power plants, and nuclear reactor components, etc. as machinery industry develops. Thus, the development of such elevated-temperature heat-resisting materials and the studies on their elevated-temperature materials friction welding, creep design and analysis have been considered as an important and needful fact. In this paper, friction welding optimization for 1Cr0.5Mo to STS304 and AE applications for the weld quality evaluation were investigated. The important results of this study are as follows : The techniques for dissimilar friction welding optimization of the elevated temperature materials 1Cr0.5Mo and STS304 and its real-time weld quality evaluation by AE were developed, considering on both strength and toughness. Quantitative relationship was identified among welding condition, weld quality and cumulative AE counts.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.4
• /
• pp.38-48
• /
• 1993

A study on friction welding of stainless steel bar(SUS431) to chrome molybdenum steel bar(SCM21) was accomplished experimentally through analysis for relations among friction welding conditions, tension test, hardness test, microstructure test and acoustic emission test. The results obtained are summarized as follows ; 1. Through friction welding of SUS431 bar to SCM21 bar, the optimum welding condition by considering on strength and toughness was found to be the range of heating time of 3-5 sec when the number of rotating speed of 2000rpm, heating pressure of 10kg/$mm^2$, and upsetting time of 4 sec. 2. Quantitative ralationship was identified between heating time($T_1$, sec) and tensile strength (${\sigma},\;kgf/mm^2$) of the friction welded joint and the relation equation is $\sigma$=52.62$T_1{^{0.06}}$. 3. Through AE test, quantitative relationship was confirmed between heating time($T_1$, sec) and total AE(N, counts) during welding, and the relation is computed as follows ; N=30413.6$e^{0.06T1}$. 4. It was confirmed that the quantitative ralationship exists between the tensile strength of the welded joints and AE cumulative counts. And the relation is computed as the following ; ${\sigma}$=16.37(ln N)- 116.4. 5. When ONZ=36500-41500 counts by $OT_1Z$=3~5sec, it was identified by experiment that the range of welded joint tensile strength is 55.6-57.7kgf/$mm^2$/ whose joint efficiency is more than 100%, and it was experimentally confirmed that the real-time nondestructive quality(strength) evaluation for the friction welded joints could be possible by acoustic emission technique.

• KDI Journal of Economic Policy
• /
• v.15 no.4
• /
• pp.3-35
• /
• 1993

본고(本稿)의 "연간거시모형(年間巨視模型)"은 경제구조(經濟構造)가 비교적 동질적(同質的)이라 할 수 있는 1970년대 이후의 연간자료(年間資料)를 이용하여 주요총량지표(主要總量指標)의 변동을 통합(統合) 단순화(單純化)된 구조식으로 파악함으로써, 거시경제정책(巨視經濟政策) 효과분석(效果分析)과 중(中) 단기(短期) 예측에 적합하도록 개발되었다. 동(同) 모형(模型)은 주요가격변수(主要價格變數)들의 내생화와 GNP갭변수의 도입을 통해 기존모형들의 가격의 내생성(內生性) 경시 및 공급측면(供給側面) 경시적 구조를 보완하고 있으며, 80년대 이후 최근에 이르기까지 우리 경제의 거시경제변동(巨視經濟變動)을 상당히 안정적(安定的)으로 추적하는 것으로 나타났다. "연간거시모형(年間巨視模型)"에 의한 통화(通貨) 금리정책(金利政策) 효과의 분석 결과, 여(與) 수신금리(受信金利)의 인상(引上)은 실질소득(實質所得) 및 물가(物價)의 하락(下落)과 국제수지(國際收支)의 개선(改善)을 가져오는 것으로 나타났으며, 계속충격(繼續衝擊)의 경우 여(與) 수신금리(受信金利) 1%포인트의 인상은 평균 0.277%의 실질소득(實質所得) 감소효과(減少效果)를 갖는 것으로 나타났다. 계속적인 통화량(通貨量) 1%의 증가는 물가(物價)를 누적적(累積的)으로 상승시켜서 4년후에는 상승효과(上昇效果)가 0.249%에 달하게 되는 것으로 나타났다. 동(同) 모형(模型)에서는 여신금리의 인상이 경제안정화(經濟安定化) 효과(效果)를 통해 오히려 실세금리(實勢金利)의 안정(安定)에 기여하는 것으로 나타났다. 재정정책(財政政策)의 정책실험 결과, 정부소비(政府消費)의 증가로 나타나는 재정규모(財政規模) 증대의 경우 재정적자(財政赤字)를 수반하는 경우와 수반하지 않는 경우의 차이가 단적으로 나타났다. 재정규모(財政規模)의 증대(增大)는 두가지 경우 모두에 있어서 물가상승(物價上昇)을 유발하지만 그 실제적(實際的) 크기는 재정적자(財政赤字)를 수반하는 경우 훨씬 크게 나타났다. 재정규모(財政規模)의 증가(增加)가 일시적일 경우, 두가지 경우 모두에 있어 물가에 대한 정(正)의 효과(效果)는 지속적인 반면 실질소득(實質所得)에 대한 효과(效果)는 일시적인 것으로 나타났다.

• Journal of environmental and Sanitary engineering
• /
• v.20 no.1 s.55
• /
• pp.64-75
• /
• 2005

The total production of food waste was about 11,398ton/day('03) in Korea. Also, food waste was treated by landfill, incineration, reuse and anaerobic digestion. The method of food waste treatment depended primarily on landfill. However, the method of landfill causing social problems was prevented to treat food waste in the first of January 2005.12) Thus, anaerobic digestion is an important method to treat food waste because of possibility of energy recovery as methane gas. In this study, the possibility of food waste treatment containing high organic material and low pH in the one stage anaerobic reactor to save cost and time and energy recovery using $CH_{4}$ gas by the hybrid anaerobic reactor (HAR) was measured. The HAR was designed by combing the merits of the anaerobic filter (AF) to minimize the microorganism shock when food waste of very low pH was injected and up-flow anaerobic sludge blanket (UASB) to prevent from plugging and channeling phenomena by large suspended solids when semi solids were injected. Granule was packed in the section of HAR. The purpose of the BMP experiment was to measure the amount of methane generated when organic material was resolved under anaerobic conditions, to grasp bio resolution of organic material. Total accumulated methane production per VS amount was $0.471(m^{3}/\cal{kg}\;VS)$. So, the value was about $81.2\%$ of theoretical methane production which was $0.58(m^{3}/\cal{kg}\;VS)$ by elementary analysis and organic matter removal velocity (K) was $0.18(d^{-1})$. From these results, food waste was treated by anaerobic treatment. From this study, $CH_{4}$ generation from food waste (11,398 ton/day) could be estimated. By using an energy conversion factor of Braun's study, $5.97KWh/m^{3}\;CH4,\;60\%\;of\;CH_{4}$ gas generation, the amount of total energy producing food waste is to 6,727MWh/day. It could be confirmed that energy recovery using $CH_{4}$ gas was possible. Above these results, food waste containing organic matters of high concentration could be treated in HRT 30 days under an anaerobic condition, using the hybrid anaerobic reactor and reuse of $CH_{4}$ gas was possible.