• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.561-567
• /
• 2018

This study was carried out to improve the ride quality of high-speed electric multiple unit. Through dynamic analysis of the HEMU-430X, the range of the equivalent conicity with a critical speed of 300 km/h was between 0.05 and 0.25. The initial adopted wheel profile of HEMU-430X was S1002. The equivalent conicity of S1002 with the mileage of more than 40,000 km was about 0.033 and it was confirmed that XP55 is more suitable for stable operation because XP55 has the equivalent conicity of over 0.061. In order to improve ride quality of high-speed electric multiple unit, the change of installation angle of the yaw damper was suggested from $7.35^{\circ}$ to $0^{\circ}$. From sensitivity analysis and optimization, the air spring lateral and vertical stiffness was suggested to be reduced by 30% and the secondary vertical and lateral damper damping coefficient was increased by 50%. By applying this, it was expected that the car body acceleration could be improved by about 20% on average. The HEMU-430X's yaw damper installation angle was changed to $0^{\circ}$ and the damping coefficient of the lateral damper was increased by 30%. When the test run was carried out at the speed of 300 km/h on the Kyungbu high-speed line, the vehicle lateral acceleration had improved by 34.3%. The effect of additional improvement measures proposed in this paper will be tested in the on track test. The riding quality improvement process used in this study can be used to solve ride quality problems that can occur in commercial operation of high-speed electric multiple unit in the future.

• Korean Journal of Ichthyology
• /
• v.30 no.4
• /
• pp.185-193
• /
• 2018

From 2017 to 2018, the disease has been monitored at four culturing eel farms in Incheon and Gyeonggi region in Korea. As a result, diseases with gill congestion frequently occurred. This disease occurred regardless of size of eel, but the frequency and cumulative mortality were high in eels within 3 months after stocking. The infected fish showed pathological histopathological features such as intense congestion and dilation in the central venous sinus (CVS) of gill filaments and hemorrhages in liver and kidney. Hexagonal viral particles measuring about 70 nm in diameter was observed in nuclei and cytoplasm of gill vascular endothelial cells. Molecular biologic diagnosis by both PCR and genetic analysis has been revealed that the causative agent of this disease is Japanese eel endothelial cells-infecting virus (JEECV), the cause of viral endothelial cell necrosis of eel (VECNE), which is mainly reported in Japan. This study is the first report on the characteristics of JEECV and VECNE infection in domestic eel farms.

• Journal of Environmental Science International
• /
• v.27 no.12
• /
• pp.1179-1193
• /
• 2018

The purpose of this study at water quality pollutants to propose proper management method for the Osu-A unit watershed which is the influent tributary located upstream of the Sumjin -river among the 13 unit watersheds in the Sumjin-river water system. Analyzed the correlation between flow-pollution loading and the correlation between land use type, BOD and TP items, and analyzed 8-day intervals Cumulative Flow Duration Curve (CFDC) and Load Duration Curve (LDC) to evaluate water quality damage. As a result, both BOD and TP were larger than 1 and the concentration of water pollutants increased with increasing flow. BOD was positively correlated with Urban and Field, and TP was positively correlated with Field with 0.710. As a result of the LDC, BOD was analyzed that the target water quality was achieved with the excess rate of less than 50%, and TP exceeded the target water quality by 50.1%. BOD usually exceeded the standard value (exceedance probability 50%) at low flow zone and On the other hand, TP usually exceeded the standard value at high flow zone. Monthly BOD (April to June) and TP (May to August) exceeded the standard. Sewage Wastewater treatment and non-point pollution control is Osu-A unit watersheds are effective in improving BOD and TP.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.5
• /
• pp.1-12
• /
• 2019

The purpose of this study is to enhance the seismic performance of exposed column-base plate weak-axis connections for small-sized steel buildings. According to the site inspection for the small-sized building construction, the arbitrary connection details in steel buildings have been applied at the job site, which is considered to be insufficient to guarantee structural safety and stability considering the increased seismic risk in Korea. Therefore, a series of test programs had been done to develop enhanced connection details in order to ensue the adequate seismic stability and safety of small-sized steel buildings. From the test results, It was found that the exposed column-base plate weak-axis connections commonly used in Korea shows very poor seismic behavior due to the "Rocking" phenomena caused by the residual plastic deformation of anchor bolts between anchor plate and concrete. A series of hysteretic tests for finding that solution were conducted to reduce the "Rocking" phenomena of the column-base plate connections, and local buckling of webs in H-column. Finally the enhanced stable seismic behavior was obtained by reinforcing at least 8 anchor bolts with good bonding strength and stiffeners to the webs in H-column.

• Korean Journal of Optics and Photonics
• /
• v.30 no.2
• /
• pp.37-47
• /
• 2019

A reflecting omnidirectional optical system with four spherical and aspherical mirrors, for use with long-wavelength infrared light (LWIR) for night surveillance, is proposed. It is designed to include a collecting pseudo-Cassegrain reflector and an imaging inverse pseudo-Cassegrain reflector, and the design process and performance analysis is reported in detail. The half-field of view (HFOV) and F-number of this optical system are $40-110^{\circ}$ and 1.56, respectively. To use the LWIR imaging, the size of the image must be similar to that of the microbolometer sensor for LWIR. As a result, the size of the image must be $5.9mm{\times}5.9mm$ if possible. The image size ratio for an HFOV range of $40^{\circ}$ to $110^{\circ}$ after optimizing the design is 48.86%. At a spatial frequency of 20 lp/mm when the HFOV is $110^{\circ}$, the modulation transfer function (MTF) for LWIR is 0.381. Additionally, the cumulative probability of tolerance for the LWIR at a spatial frequency of 20 lp/mm is 99.75%. As a result of athermalization analysis in the temperature range of $-32^{\circ}C$ to $+55^{\circ}C$, we find that the secondary mirror of the inverse pseudo-Cassegrain reflector can function as a compensator, to alleviate MTF degradation with rising temperature.

• Journal of The Korean Association For Science Education
• /
• v.41 no.3
• /
• pp.267-281
• /
• 2021

The shift in the perspective on learning as participation draws attention to learners' identity work. This manuscript foregrounds the ongoing and fluid processes of identity, and focuses on the structure surrounding learners where identity work occurs and the expression of individual agency. From the perspective of learning as participation, we introduce Holland et al. (1998) identity-in-practice theory, as the theoretical lens that dialectically describes structure, agency and identity. The concepts representing this theory are 'figured world', 'positionality' and 'authoring self'. The figured world is a web of meaning encompassing the continuous construct/reconstruct through human actions and also exerts as the social force that shapes human actions. 'Positionality' on the other hand, means an understanding of one's social position in the world. The notion of 'authoring self', is a dimension that synthesizes the above two concepts, which describes the improvisation of one's self through the orchestration and collaboration of various social voices. Next, we analyzed and described various cases of this theory that we found within the scope of science education. However, due to the nature of this theory, which takes a sociocultural approach, international research studies cannot be simply applied to the Korean context. Therefore, we sought to expand the applicability of this theory as a methodological tool, by discussing the directions in which this theory can be used in a domestic context. It is intended that the introduction of this theory, which emphasizes multi-layered, continuous and cumulative identity work, will be used as a resource to further expand the horizon of science education reform that is required for the times.

• Journal of the Korea Convergence Society
• /
• v.12 no.11
• /
• pp.419-426
• /
• 2021

Until recently, various studies for the production of high-acidity vinegar have been conducted, but there have been few studies on the concentration process of vinegar. In this study, the possibility of introducing freeze-concentration method was investigated for the production of high-quality, high-acidity vinegar. Acidity, pH, specific gravity, and glucose concentration were measured for frozen concentrated vinegar fractions obtained by freezing and thawing three types of Rubus coreanus vinegar with different acidy (7.53, 5.43, and 3.72). Acidity, specific gravity, and glucose concentration were all highest when 15% of the original vinegar was thawed. pH was the lowest when 15% of the original vinegar was melted. As a result of the measurement of cumulative acidity, when 20% of the original vinegar was melted, it was the highest at 9.32, which was 3.89 higher than that of the original vinegar. In this study, it was confirmed that vinegar can be effectively concentrated using the freeze concentration method and at the same time, the thawing ratio can be controlled to effectively obtain vinegar with the desired acidity. However, it is considered that studies such as organic acid and amino acid analysis are needed to determine whether the freeze-concentration method is introduced into the high-acidity concentrated vinegar manufacturing process.

• Journal of the Korean Society of Radiology
• /
• v.16 no.3
• /
• pp.357-363
• /
• 2022

This study aims to improve the safety inspection awareness of occupational exposure and help radiation safety management by analyzing radiation exposure doses by occupational type of radiation related-workers and radiation workers. Radiation-related workers and radiation workers were classified into three occupations (radiological technologist, doctors, and nurses). A nominal risk coefficient based on ICRP 103 was used to calculate the probability of causing side effects of the lungs due to exposure doses. As a result of analyzing the exposure dose of all workers for one year, the exposure dose of radiological technologist among radiation-related workers was 1.63 ± 2.84 mSv, doctors 0.12 ± 0.22 mSv, and nurses 0.59 ± 1.08 mSv. The one-year deep dose for radiation workers was 2.44 ± 3.30 mSv for radiological technologists, 0.19 ± 0.26 mSv for doctors, and 0.12 ± 0.00 mSv for nurses. Due to this dose, the probability of causing side effects in the lungs was 1.2 per 100,000 radiological technologist, 0.096 doctors, and 0.06 nurses. In this study, it is believed that the probability of side effects on lungs by occupation of radiation exposure dose will be studied and used as useful data for radiation safety management in relation to probabilistic effects in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.5
• /
• pp.599-606
• /
• 2022

Strain gauges and the bridge weigh-in-motion (BWIM) method are the representative field measurement methods used for fatigue evaluationsof a steel bridge-in-service. For a fatigue reliability evaluation to assess fatigue damage accumulation, the effective stress range and the number of stress cycles applied as the fatigue details can be estimated based on the AASHTO Manual for Bridge Evaluations with the field measurement data of the target bridge. However, the procedure for estimating the effective stress range and the stress cycles from field measurement data has not been explicitly presented. Furthermore, studies that quantitatively compare differences in fatigue evaluation results according to the field measurement data type or processing method used are still insufficient. Here, a fatigue reliability evaluation is conducted using strain and BWIM data that are measured simultaneously. A frame model and a shell-solid model were generated to examine the effect of the accuracy of the structural analysis model when using BWIM data. Also, two methods of handling BWIM data when estimating the effective stress range and average daily cycles are defined. As a result, differences in evaluation results according to the type of field measurement data used, the accuracy of the structural analysis model, and the data handling method could be quantitatively confirmed.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.1-18
• /
• 2022

Currently, the Korea Meteorological Administration evaluates the meteorological drought by region using SPI6(standardized precipitation index 6), which is a 6-month cumulative precipitation standard. However, SPI is an index calculated only in consideration of precipitation at 69 weather stations, and the drought phenomenon that appears for complex reasons cannot be accurately determined. Therefore, the purpose of this study is to calculate and compare SPI considering only precipitation and SDCI (Scaled Drought Condition Index) considering precipitation, vegetation index, and temperature in Gyeonggi. In addition, the advantages and disadvantages of the station data-based drought index and the satellite image-based drought index were identified by using results calculated through the comparison of SPI and SDCI. MODIS(MODerate resolution Imaging Spectroradiometer) satellite image data, ASOS(Automated Synoptic Observing System) data, and kriging were used to calculate SDCI. For the duration of precipitation, SDCI1, SDCI3, and SDCI6 were calculated by applying 1-month, 3-month, and 6-month respectively to the 8 points in 2014. As a result of calculating the SDCI, unlike the SPI, drought patterns began to appear about 2-month ago, and drought by city and county in Gyeonggi was well revealed. Through this, it was found that the combination of satellite image data and station data increased efficiency in the pattern of drought index change, and increased the possibility of drought prediction in wet areas along with existing dry areas.